signify 710183 Solar Portable Charger User Guide

signify 710183 Solar Portable Charger

Product Information

Solar Portable Charger The Solar Portable Charger is a device that allows you to charge your electronic devices using solar energy. It features four solar panels and a storage pouch for convenient usage. The charger comes with carabiners for attaching it to various objects, and it is designed to be portable and easy to use.

Please read the instruction manual provided for a complete guide on using the Solar Portable Charger.

Product Usage Instructions

1. Opening the Solar Portable Charger:

   • Place the charger on a flat, dry surface.
   • Gently pull a corner of the charger to separate the hook and loop tape.
   • Unfold the charger until all four solar panels and the storage pouch are exposed and facing upwards.

2. Attaching the Solar Portable Charger:

   • Use the supplied carabiners to attach the charger to an object.
   • Unlock the gate on a carabiner and pass the nose through the eyelet of the charger and the eyelet/strap on the object.
   • Release the gate to securely close the carabiner.
   • Repeat the process for the remaining carabiners and eyelets.
   • Always ensure that the charger is securely attached to the object.

3. Setting up Solar Portable Charger when not attaching it to an object:

   • If you want optimal charging and have enough space, lay the charger on the ground or drape it over the bonnet or windscreen of a stationary vehicle.
   • Ensure that the solar panels are facing the appropriate direction based on your location (refer to the diagram in the manual).
   • Take caution with devices being charged as long-term sunlight exposure or excessive heat may cause damage. Follow the guidelines provided by the device manufacturer.

4. Charging devices using your Solar Portable Charger:

   • Open the storage pouch and access the junction box inside.
   • Remove the USB dust cover/s from the USB port/s.
   • Insert the USB end of your USB charging cable (not supplied) into the USB port on the junction box.
   • Connect the charging end of your USB charging cable (not supplied) to your device.
   • The charging process will begin.

5. Closing the Solar Portable Charger:

   • Place the charger on a flat, dry surface with the solar panels and storage pouch facing upwards.
   • Starting from the edge furthest away from the storage pouch, fold the charger one solar panel at a time until the hook and loop tape is aligned.
   • Gently tap the fabric above the hook and loop tape to securely close the charger.
   • Always disconnect all USB charging cables from the USB ports and store them in the storage pouch. Unhook all carabiners from the eyelets and place them in the storage pouch.

For a complete guide please read the instruction manual provided

OPENING THE SOLAR PORTABLE CHARGER

• Place on a flat, dry surface. Grasp a corner of the Solar Portable Charger and gently pull the corner until the hook and loop tape is completely separated.
• Unfold the Solar Portable Charger until all four solar panels and the storage pouch are completely exposed and facing upwards.

ATTACHING THE SOLAR PORTABLE CHARGER

• There are 4 x carabiners supplied with the Solar Portable Charger. Unlock the gate on one of the carabiners and pass the nose of the carabiner through the eyelet of the Solar Portable Charger and the eyelet/strap on the object you are attaching it to.
• Release the gate so that the carabiner is securely closed. Repeat for the remaining carabiners and eyelets.
• NOTE: Always check that the Solar Portable Charger is securely attached to the object.

SETTING UP SOLAR PORTABLE CHARGER WHEN NOT ATTACHING IT TO AN OBJECT

• If you want best charging, are not facing space constraints, and are not on the go, then simply lay the Solar Portable Charger on the ground or drape it over the bonnet or windscreen of your stationary vehicle.
• WARNING: The devices being charged using the Solar Portable Charger, may not be suitable for long-term sunlight exposure.
• Excessive heat may cause damage. Always refer to the guidelines provided by the manufacturer of the device being charged to avoid any hazard or possible product failure.
• For optimum charging results, position the Solar Portable Charger so that it is always directly facing the sun.
• We recommend the panels face NORTH at an angle of between 20° and 40° from the ground.
• Refer to the instructions on page 15 of the instruction manual for more detailed information.

CHARGING DEVICES USING YOUR SOLAR PORTABLE CHARGER

• Undo the hook and loop tape on the storage pouch so that you can access the junction box inside.
• Remove the USB dust cover/s from the USB port/s.
• Insert the USB end of your USB charging cable (not supplied) into the USB port on the junction box.
• Connect the charging end of your USB charging cable (not supplied) to your device. The charging process has now commenced.

CLOSING THE SOLAR PORTABLE CHARGER

• Place on a flat, dry surface so that the solar panels and the storage pouch are facing upwards. Holding the edge of the Solar Portable Charger which is furthest away from the storage pouch, fold the Solar Portable Charger one solar panel at a time until the hook and loop tape is aligned. Gently tap the fabric above the hook and loop tape until the Solar Portable Charger is securely closed.
• NOTE: Always check that all USB charging cables (not supplied) have been disc onnected (removed) from the USB ports, and all the carabiners have been unhooked from the eyelets and placed in the storage pouch.
• AFTER SALES SUPPORT 1300 777 137
• service@unclebills.com.au
• MODEL: EA2265 PRODUCT CODE: 710183 07/2022

Documents / Resources

| signify 710183 Solar Portable Charger [pdf] User Guide
710183 Solar Portable Charger, 710183, Solar Portable Charger, Portable Charger, Charger
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>