sauermann AMI 310 Multi Parameters User Guide

June 12, 2024
sauermann

sauermann logo AMI 310 Multi Parameters
User Guide

sauermann AMI 310 Multi Parameters AMI 310

Quick start guide

**** The AMI 310 measures simultaneous parameters including pressure, temperature (Pt100 and thermocouple), humidity, air quality (CO/CO2), air velocity, airflow (vane probes and hotwire), and tachometry.

Operating temperature, protection of the instruments and information about storage and the battery

  • Operating temperature: 0 to 50 °C (+32 to +122 °F)
  • IP 54
  • Storage temperature: -20 to 80 °C (-4 °F to 176 °F)
    If the instrument is stored outside the operating temperature (for example in a van, a warehouse,…) please wait for 10 minutes in its operating temperature before starting and using it.

Rechargeable Li-ion battery inside the instrument, 16 h battery-life with a pressure module or 14 h a hotwire probe. The instrument is supplied with a 5 V, 1 A power adapter to load the internal battery. The current loading is indicated by a battery symbol  on the top left of the screen.
The orange led on the bottom of the instrument is also on until the full loading of the battery (the led turns green).

Directive 2014/53/EU
Hereby, Sauermann Industrie SAS declares that the radio equipment type AMI 310 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.sauermanngroup.com

Device description

sauermann AMI 310 Multi Parameters - Device

1. Battery level 8. Configuration menu
2. USB connection indicator 9. Information menu
3. Battery level 10. Function keys
4. Date and time 11. OK button
5. Home screen 12. Navigation arrows
6. Measurement menu 13. ESC button
7. Dataset menu 14. On/Off button

Connections

  1. Module

  2. Location to remove the module

  3. Battery

  4. Probe handle

  5. Mini-DIN C2 connection

  6. Thermocouple inputs

  7. Mini-DIN C1 connection

  8. USB connection + power supply

  9. Light indicator for battery charging

Set language

sauermann AMI 310 Multi Parameters - language

Use of the probes

Connect a probe
Connect the mini-DIN cable on the mini-DIN connection of the probe.
Connect the mini-DIN cable with the probe on the instrument.
A beep indicates that the operation has been correctly performed.
Special precautions for air velocity probes

sauermann AMI 310 Multi Parameters - air velocity Before any use of the device with an air velocity probe, please lower the protective tube (1) of the sensitive element (except vane probe).
Always use the standard air velocity probe with the red point in front of the flow. Always use the telescopic probe with the white point in front of the flow.

Add a wireless probe

sauermann AMI 310 Multi Parameters - wireless probe

Start and record datasets

The instrument in on.
Select with arrows keys “Measurement” menu.
Press OK.
Select with arrows keys the measurement in which the dataset will be performed.
Press “Functions” key then select “Dataset” with arrow keys and press OK.
Dataset menu is displayed.
Go to line “Name” with arrow keys and press OK.
A keypad is displayed on the bottom of the screen.
Select the letters with arrow keys then press OK.
To go from the lower case keypad to the upper case keypad then to the numeric keypad, press the function key:
To delete a letter press the function key “Delete”.
Press the function “Validate” to validate the name of the dataset.
A dataset is composed of several dated measuring points.
You can choose between an automatic dataset or a manual dataset.
Go to “Type” with arrow keys then press OK.
Select “Manu.” for manual or “Auto.” for automatic.
Go to “Start” then press OK.

View the recorded datasets
Go to the “Dataset” menu with the arrow keys from the home screen.
The different measuring datasets are displayed. They are listed by date.
To delete all the datasets: press the function key “Del all”.
To delete just one dataset: go to the dataset to delete with the arrow
keys and press the function key “Delete”.
A confirmation window opens: select YES to confirm the deletion or NO to cancel.

Launch averages
The instrument is on.
Go to “Measurement” with the arrow keys.
Press OK.
Press the function key “Functions” then select “Averages” then press OK.
“Average” menu is displayed.

Hold-Min/Max
Go to “Measurement” menu with the arrow keys and press OK.
Measurements are displayed.
Press OK.
Measurements are frozen on the screen and the minimum and maximum values are displayed.

Perform an autozero

It is possible to perform an autozero with a pressure module.
This sub-function allows to manually compensate the potential deviations of the sensitive element over time through a manual adjustment of the zero.
For the 500 Pa pressure module with solenoid valve:
In the menu “Functions”, go to “Autozero” then press OK.
For 2500 Pa, 10000 Pa, 500 mbar and 2000 mbar pressure modules without solenoid valve:
Unplug the 2 pressure connections tubes from the pressure module.
In the menu “Functions”, go to “Autozero” then press OK.

Download the full manual

sauermann AMI 310 Multi Parameters - qr codehttps://sauermanngroup.com/en-INT/technical-documents?search=ami

Sauermann Industries – ZA Bernard Moulinet – 24700 – Montpon – France
www.sauermanngroup.com

QSG – AMI 310 – 07/10/2022 – Non-contractual document – We reserve the right to modify the characteristics of our products without prior notice.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals