sauermann HQ 210 Thermo-Hygrometer User Guide
- October 27, 2023
- sauermann
Table of Contents
sauermann HQ 210 Thermo-Hygrometer
The HQ 210, with its climatic condition module, measures CO2, humidity and temperature.
Operating temperature, protection of the instruments and information about storage and the battery
- Operating temperature: 0 to 50 °C (+32 to +122 °F)
- IP 54
- Storage temperature: -20 to 80 °C (-4 °F to 176 °F)
If the instrument is stored outside the operating temperature (for example in
a van, a warehouse,…) please wait for 10 minutes in its operating temperature
before starting and using it.
Rechargeable Li-ion battery inside the instrument, 16 h battery-life with a
pressure module or 14 h a hotwire probe. The instrument is supplied with a 5
V, 1 A power adapter to load the internal battery. The current loading is
indicated by a battery symbol on the top left of the screen. The orange led on
the bottom of the instrument is also on until the full loading of the battery
(the led turns green).
Directive 2014/53/EU
Hereby, Sauermann Industrie SAS declares that the radio equipment type AMI 310 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.sauermanngroup.com
Device description
- Battery level
- Date and time
- Home screen
- Measurement menu
- Dataset menu
- Configuration menu
- Information menu
- Function keys
- OK button
- Navigation arrows
- ESC button
- On/Off button
Connections
-
Module
-
Location to remove the module
-
Battery
-
Probe handle
-
Mini-DIN C2 connection
-
Mini-DIN C1 connection
-
USB connection + power supply
-
Light indicator for battery charging
Set language
Use of the probes
Connect a probe
Connect the mini-DIN cable on the mini-DIN connection of the probe. Connect
the mini-DIN cable with the probe on the instrument.
A beep indicates that the operation has been correctly performed.
Special precautions for air velocity probes
Before any use of the device with an air velocity probe, please lower the protective tube (1) of the sensitive element (except vane probe). Always use the standard air velocity probe with the red point in front of the flow. Always use the telescopic probe with the white point in front of the flow.
Add a wireless probe
Start and record datasets
The instrument in on.
Select with arrows keys “Measurement” menu. Press OK.
Select with arrows keys the measurement in which the dataset will be
performed.
Press “Functions” key then select “Dataset” with arrow keys and press OK.
Dataset menu is displayed.
Go to line “Name” with arrow keys and press OK.
A keypad is displayed on the bottom of the screen.
Select the letters with arrow keys then press OK.
To go from the lower case keypad to the upper case keypad then to the numeric
keypad, press the function key:
To delete a letter press the function key “Delete”.
Press the function “Validate” to validate the name of the dataset. A dataset
is composed of several dated measuring points.
You can choose between an automatic dataset or a manual dataset. Go to “Type”
with arrow keys then press OK.
Select “Manu.” for manual or “Auto.” for automatic.
Go to “Start” then press OK.
View the recorded datasets
Go to the “Dataset” menu with the arrow keys from the home screen. The
different measuring datasets are displayed. They are listed by date.
To delete all the datasets: press the function key “Del all”.
To delete just one dataset: go to the dataset to delete with the arrow
keys and press the function key “Delete”.
A confirmation window opens: select YES to confirm the deletion or NO to
cancel.
Launch averages
The instrument is on.
Go to “Measurement” with the arrow keys.
Press OK.
Press the function key “Functions” then select “Averages” then press OK.
“Average” menu is displayed.
Hold-Min./Max.
Go to “Measurement” menu with the arrow keys and press OK. Measurements are
displayed.
Press OK.
Measurements are frozen on the screen and the minimum and maximum values are
displayed.
Download the full manual Télécharger le manuel complet Descargue el manual de usuario Scarica il manuale completo
Customer service portal / Portail service clients Portal de servicio al cliente
Use our Customer service portal to contact us
Utilisez notre Portail service clients pour nous contacter
Sauermann Industries – ZA Bernard Moulinet – 24700 – Montpon – France
www.sauermanngroup.com
QSG HQ 210 03/10/2022 Non-contractual document We reserve the right to modify the characteristics of our products without prior notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>