BAOLIFENG X8 Bluetooth Headset User Guide
- June 1, 2024
- BAOLIFENG
Table of Contents
BAOLIFENG X8 Bluetooth Headset
Product Information
Specifications:
- Model: X8
- Bluetooth Version: [Specify the Bluetooth version]
- Indicator Light: Red and Blue
- Power Button: Located on the headphone
Product Usage Instructions
Pairing the Headphones with Your Device:
- Press and hold the power button on the headphones for 10 seconds.
- Wait for the headphone indicator light to change from fast flashing to one headphone showing red and blue light blinking, and the other headphone light off.
- Once the lights indicate pairing mode, it means the headphones have been paired.
Connecting to Your Cell Phone via Bluetooth:
- Open the Bluetooth settings on your cell phone.
- Search for the device named “X8” in the list of available devices.
- Click on “X8” to establish a connection between your cell phone and the headphones.
Frequently Asked Questions
Q: How do I charge the X8 headphones?
A: To charge the X8 headphones, use the provided charging cable and connect it to a power source such as a USB port on your computer or a USB wall adapter.
Q: How do I know when the headphones are fully charged?
A: The indicator light on the headphones will turn solid green when the headphones are fully charged.
Read the manual before use
If you have any questions, please contact the customer service to deal with them immediately Please do not make negative comments at will. Our service is up to your satisfaction
Important: Plug in the charging wire for charging at the first time after receiving the goods, and use it after fully charging, which can make the Bluetooth headset last longer
Important: Do not use super fast charging with current above 2A to avoid damaging the circuit chip due to excessive current
The connection steps are as follows
Press and hold the power button wait for 10 seconds, the headphone indicator
light changes from fast flash to one headphone red and blue light blinking,
one headphone light off, it means the headphones have been paired.
Open the Bluetooth of your cell phone, search for X8, click to connect
Charging method
Plug in the cable we sent, and be careful to plug it in to the end. The number of the display flashes to recharge the earphone charging compartment. When you charge the display “100”, it is full. (with power display)
Touch function
- Click on the earphone touch area: play/pause
- Double-click the earphone touch area: pull-back
- Triple-tap headphone touch area: volume down/ volume up
- Quadruple tap left earphone touch area: summon Siri function
- Four click right earphone touch area Game/ music mode switching
- Long press 2 seconds earphone touch area: previous/next song
If you find that you do not like or will not use the goods, remember to contact the store customer service to teach you how to use them. If you do not like to return the goods and remember to choose another reason forreturning, this is very important to us. Thank you very much
FCC
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two
conditions: (1) This device may not cause harmful int e<ference, and (2) this
device must
accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receive<.
- Connect the equipment to an outlet and a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radialW technician for help.
Note: The Grantee is not responsible for any changes or modifications not
expressly approved by the party responsible for compliance. such modifications
could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirements. This
equipment complies with FCC’s RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna(s) must not be co-
located or in conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>