GE APPLIANCES GG40T10BXR Premium 40-Gallon Tall Natural Gas Atmospheric Water Heater Instruction Manual
- June 13, 2024
- GE Appliances
Table of Contents
GE APPLIANCES GG40T10BXR Premium 40-Gallon Tall Natural Gas Atmospheric
Water Heater
Product Information
The GG40T10BXR is a water heater that requires installation in accordance with
the provided instructions, local codes, utility company requirements, or the
latest edition of the National Electrical Code. It is recommended to refer to
the installation instruction packed with the water heater for complete
information.
The water heater has a dimension of 58-1/2 inches and is listed by
Underwriters Laboratories. It is also certified to NSF/ANSI 372 for lead
content. For power requirements, it is important to check the markings on the
rating plate of the water heater to
ensure that the power supply corresponds to the water heater requirements.
The location of the water heater should be in a clean dry area near the area
with the highest demand for heated water. Long uninsulated hot water lines can
result in energy and water waste. It is necessary to maintain sufficient
clearances around the water heater for service access. Additionally,
earthquake straps may require minimal clearance on the sides or rear of the
unit.
Product Usage Instructions
- Ensure that the power supply corresponds to the requirements indicated on the rating plate of the water heater.
- Locate a clean dry area near the area with the highest demand for heated water to install the water heater.
- Maintain sufficient clearances around the water heater to allow for service access and comply with installation regulations.
- Refer to the installation instruction packed with the water heater for complete information on installation.
- Connect the hot water outlet of the water heater to fixtures using appropriate plumbing connections.
- Connect the cold water supply to the water heater.
- If applicable, connect the vent pipe to a chimney and ensure proper ventilation.
- Install a shut-off valve for manual gas shut-off, if required.
- Ensure that the temperature and pressure relief valve is properly installed.
- Check the discharge location of the relief valve according to local code requirements.
- If necessary, install a sediment trap catch pan and a drain valve.
- Ensure proper combustion air inlets for the water heater.
For further details and warranty information, please refer to the written warranty provided with the product.
GG40T10BXR
GE RealMAX® Premium 40-Gallon Tall Natural Gas Atmospheric Water Heater
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
LOCAL INSTALLATION REGULATIONS
-
This water heater must be installed in accordance with these instructions, local codes, utility codes, utility company requirements or, in the absence of local codes, the latest edition of the National Electrical Code. It is available from some local libraries or can be purchased from the National Fire Preventions Association, Batterymarch park, Quincy, MA 02169 as booklet ANSI/NFPA 70.
-
INSTALLATION INFORMATION: F or complete information, see installation instruction packed with your water heater.
-
POWER REQUIREMENTS: Check the markings on the rating plate of the water heater to be certain the power supply corresponds to the water heater requirements.
LOCATION: Locate the water heater in a clean dry area as near as practical to the area of the greatest heated water demand. Long uninsulated hot water lines can waste energy and water. -
REQUIRED CLEARANCES : There must be sufficient clearance between any object and the top, rear and sides
of the water heater in the event service is needed. The controls and drain at front of unit must have clear access for operation and service. Installations that require minimal clearance on the sides or rear of the water heater for earthquake straps are also acceptable. In these cases, additional clearance should be provided on the opposite side of the unit to allow for service access.
Above illustration intended for dimensional reference only. Refer to photograph for actual product appearance.
For answers to your GE Profile™ or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.
FEATURES AND BENEFITS
- Real Capacity – Get the most hot showers from the only natural gas water heater that holds a true 40 gallons of water (Compared to 40 gallon gas steel tank water heaters per DOE rated gallon capacity).
- Leading Performance – Live comfortably with this best in class unit that delivers up to 84 gallons of hot water in the first hour of use (Measured through DOE First Hour Rating).
- Household Size – Provide hot water for the whole family of 2 to 4 persons.
- Quick Recovery – Quickly replenish hot water with a max-performance 40K burner.
- Anode Rod – Durable design offers long-lasting protection against corrosion to extend the life of your water heater tank.
- SmartShield™ Safety System – Monitors the surrounding air and automatically shuts off the unit if abnormal temperatures are detected.
- Self-Diagnostic – Monitors and reports on gas system status via LED status indicator.
- Drain Valve – Rust-proof construction can be counted on to provide long-lasting service.
- Easy Installation – Replace your old water heater quickly and easily using standard water and gas connections.
- Built-To-Last warranty – RealMAX™ Premium water heaters carry a 10-year tank and parts limited warranty*.
- Model GG40T10BXR – Diamond Gray
- *See written warranty for full details
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>