Sauermann CR 110 Solar Radiation Transmitter User Guide
- October 30, 2023
- sauermann
Table of Contents
Quick Start Guide
CR 110
Solar radiation transmitter
CR 110 measures solar radiation from 0 to 1,500 w/m2.
Operating temperature, protection of the instruments and information about
storage
Conditions of use (°C/%RH/m): from -10 to +50 °C; in non-condensing
conditions. From 0 to 2000 m.
Protection: IP65
Storage temperature: from -10 to +70 °C.
Dimensions
Symbols used
For your safety and in order to avoid any damage of the device, please follow
the procedure described in this document and read carefully the notes preceded
by the following symbol:
The following symbol will also be used in this document, please read carefully
the information notes indicated after this symbol:
Connections
- Inactive switch
- Inactive switch
- LCC-S software connection
- Output terminal block
- Power supply terminal block
- Cable gland
Electrical connections – as per NFC15-100 standard
This connection must be made by a qualified and trained technician.
To make the connection, the transmitter must not be energized.
For CR 110-AO models with 0-10 V output – active:
To make a 3-wire connection, before powering up the transmitter, please connect the output ground to the input ground. See drawing below.
For CR 110-PO models with 4-20 mA output – passive:
Mounting
To mount the transmitter, mount the ABS plate on the wall (drilling: Ø 6 mm,
screws and pins are supplied).
Insert the transmitter on the fixing plate (see A on the drawing beside).
Rotate the housing in clockwise direction until you hear a “click” which
confirms that the transmitter is correctly installed.
Maintenance: please avoid any aggressive solvent. Please protect the
transmitter and its probes from any cleaning product containing formalin, that
may be used for cleaning rooms or ducts.
Precautions for use : please always use the device in accordance with its
intended use and within parameters described in the technical features in
order not to compromise the protection ensured by the device.
Download the LCC-S software user manual| Download the CR 110 data
sheet
---|---
|
https://sauermanngroup.com/en-INT/measuring-
instruments/transmitters/software/lcc-s|
https://sauermanngroup.com/en-INT/measuring-instruments/transmitters/solar-
radiation-transmitters/cr-110
Customer service portal
Use our Customer service portal to contact us
https://sauermann-en.custhelp.com
QSG – CR 110 – 07/10/2022 – Non-contractual document – We reserve the right to modify the characteristics of our products without prior notice