CRYSTORAMA DEL90808MK Delilah 40.5 Inch Crystal Hanging Chandelier Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA DEL90808MK Delilah 40.5 Inch Crystal Hanging Chandelier
Product Information
The product is a lighting fixture model #DEL90808MK manufactured by Crystorama. It has a dry rating, meaning it is suitable for indoor use. The fixture requires 8 Candelabra Base Bulbs with a recommended wattage of 40 Watts and a maximum wattage of 60 Watts. LED bulbs are recommended for extended use. The package includes various parts such as mounting hardware, canopy, collar ring, chain, fixture loop, check ring, frame, distributor box, center finial, and ball nuts. Additionally, crystal sets consisting of different lengths of bead strings and a crystal ball are also included. It is important to note that the electrical installation should be performed by a licensed electrician in accordance with the National Electric Code and local electrical codes. The product may expose you to lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm.
Product Usage Instructions
- Before installation, place the fixture parts on a soft cloth-covered platform.
- Install the mounting bar onto the outlet box.
- Decide the desired hanging height and adjust the chain to the correct length.
- Spread the arms out equally. Place the metal ring inside the arms and align the holes on it with the holes in the arms. Secure the metal ring with ball nuts. Be careful not to bend the arms too hard when placing the ring inside.
- Place the check ring on top of the fixture body and secure the fixture loop.
- Raise the fixture up and perform the wire connection.
- Attach the canopy over the mounting bar and secure it with a collar ring.
- Dress the crystals in the following sequence: C strands – 1, 4, 2, 5, 3, 6, 4, 7, 5, 8, 6, 1, 7, 2, 8, 3.
Note: The bulbs are not included in the product. Ensure to use the recommended bulb type and wattage for safe operation.
ASSEMBLY INSTRUCTION
- MODEL #DEL90808MK
WARNING
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes
You will need 8- Candelabra Base Bulb 40 Watts recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE
The fixture is Dry rated
HOW TO INSTALL
Place the fixture parts on a soft cloth-covered platform before installation of the fixture.
- Install the mounting bar onto the outlet box.
- Decide the desired hanging height and adjust the chain to the correct length.
- Spread the arms out equally. Place the metal ring inside the arms and align the holes on it with the holes in the arms. Secure the metal ring with ball nuts. (please do not bend the arms out too hard when placing the ring inside.)
- Place the check ring on the top of the fixture body and secure the fixture loop.
- Raise the fixture up and do the wire connection. Attach the canopy over the mounting bar and secure it with a collar ring.
- Dress the crystals as illustrated.
Dress Crystal Strands C in the following sequence:
WARNING:This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm.For more information go to www.p65warnings.ca.gov
Crystal Sets
- A. 8 Sets. (2)14mm
- B. 8 Sets. 370mm long bead string–(10mm bead*24pcs)
- C. 8 Sets. 910mm long bead string–(10mm bead*59pcs)
- D. 1 Piece. (1)AS8-50mm Ball
- E. 1 Piece. 750mm long bead string–(10mm bead*58pcs)
Part Number
- A. (1)-Mounting hardware
- Wire Connector × 2.
- Mounting bar x 1.
- Lock washer x 1.
- Hex nut x 1.
- Mounting screw x 2.
- Thread nipple × 1.
- B. (1)-Canopy (W5″×H1 1/4″) -XSN90803MKCAN5.11IN
- C. (1)-Collar Ring
- D. (1)-Collar Loop
- E. (1)-Chain (4mm×72″) -XSN90803MKCHA4MM
- F. (1) -Fixture Loop
- G. (1)-Check Ring
- H. (1)-Frame
- I. (1)-Distributor Box
- J. (1) -Center Finial
- K. (1)-Metal Ring; 02 7/8″; 5.5mm holes x 8.
- L. (8)-Ball Nut
- M. (8)-Crystal Bobeche ; 02 3/8″,H3/8″; 23mm center hole. -XSN90802B0B2.4IN
- N. (8) – Candle Sleeve; 0 7/8″, H4 1/8″ -XSN90806MKCDL4.13IN
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>