COMMAX CM-810 Wire Digitized Master Intercom Instructions

COMMAX CM-810 Wire Digitized Master Intercom Instructions

Greetings

• Thank you for purchasing our Commax product.
• You should read this user’s manual carefully before operating the unit.
• This common method H/A system provides residents of apartment buildings with safety and convenience based on various built-in functions that protect homes from disasters such as crimes, natural disasters, etc.

Warnings and caution

Please follow the things described below in order to prevent any danger or property damage.

Power & Installation

Warning

• Please don’t use several products at the same time on one power socket.

  • It may cause a fire due to an abnormal overheating.

• Please don’t bend the power cable excessively or it may cause and electric shock.

  • fire when using a damaged power cable.

• Please don’t handle the power cable with a wet Fold.

  • It may cause an electric shock.

• Please plug out the power cable form the socket when not using it for a long period of time.

  • It may shorten the product lifespan or cause a fire.

• Please don’t install the product in the place where there is much oil, smoke or humidity.

  • it may cause an electric shock or fire.

• Please don’ t install the product with the lightening and thunder.

  • It may cause an electric shock or tire.

• Please don’t I use and cameo this product with other products with different rated voltage.

  • It may cause a disorder or fire.

• When installing the product that Generates hen, please install the product away from the wall (10cm) for the ventilation.

  • It may cause a tire due Eu the increased internal temperature.

Cleaning & Use

Warning

• Please don’t disassemble, repair or rebuild this product arbitrarily (please contact the service center if a repair is needed.

  • It may cause an electric: shock or fire.

• If an abnormal sound, burning smell or smoke is coming out of the product, please plug out the power cable and contact a service center.

  • It may cause an electric shock or lire.

• Please don’t insert any metallic or burnable materials into the ventilation hole.

  • It may cause an electric shock or fire.

• Please use only the designated batteries for the product; of using DC power.

  • It may cause an electric shock or fire.

Power & Installation

Caution

• Please plug the power cable firmly into the inner end.

  • It may cause a fire.

• Please hold the plug tightly when unplugging the power cable (8 pad of the copper wire may he disconnected if the grabbing is only. made on the cord when pulling out the cable ).

  • It may cause an electric shock or fire.

• When connecting We power cables after cutting the cable, please install the product with power off.

  • It may, cause an electric shock, or fire.

• When installing the product, please fix it firmly while using the wall-mounting unit and screws.

  • Di may cause an injury from the failing object.

• Please he careful when using an AC circuit breaker since there is a possibility of an electric shock.

• Please Check the use voltage and current for the DC-only products and use the appropriate rectifier.

  • It may cause a fire.

• Please avoid direct rays of the sun or heating devices, at a time of Installation.

  • It may cause a fire.

• Please don’t install the product on an unstable place or small support board.

  • It may cause an injury if it falls down while in use

• When cleaning the product, please rub it with a soft and dry cloth after plugging out the power cable. (Please don. t use any chemical products such as wax, benzene, alcohol or cleaner.)

• Please don’t drop the product on the ground and don’t apply a shock.

  • It may cause a failure.
    

• Please use the designated connection cable within the maximum calling distance designated for the product.

  • It may reduce the product performance.

Part Name and its functions

3-1 CM-810 Parts Name

NO|

Description

---|---

①

| Speaker
②|

Display

③

|

Ten-key

④

|

LOCK(Priority Call)

⑤

|

CALL

⑥

|

TALK

⑦

| Volume Control Dial
⑧|

Call Sound Volume Control Dial.

⑨

|

MIC

• Volume Control Dial: it is to adjust the voice level from CM-800S.
• Ring Sound Volume Control Dial.: it is to adjust the ring sound level from CM-800S.

This product is open voice type.
Pressing “Talk” button will start communication and then pressing “Talk” again will end it.

3-2 CM-800S Part Names

NO

|

Description

---|---

①

| Speaker
②|

Privacy Button

③

| CALL Button
④|

C-MIC

Operation

CM-810

Making a call to CM-800S

1. Press the desired number of CM-800S to talk and then “#”button. The “beep” sound is heard.
   Ex) paging first CM-800S: “1 + # (beep)”

   • Wrong number makes “Error” sound. (It″ available from 1 to 10)
   • Pressing “*”button to conceal the registration of wrong number.

2. After the communication line is opened, pressing the “all” button to make a ring.
   Ex) Paging first CM-800S: “1 + # (beep)”+ “all” button.

   • During keep pressing “all” button only, there is a ring.

When you receive a call from other unit during talk, other unit’s number is displayed.
Press “#”button twice if you want to talk with other unit.
Ex) when you receive a call from No.2 unit during talking with No.1, No.2 is displayed. Press “#”to end the talk with No.1 unit and start to talk with No.2 unit.

Public Notice function.(ALL CALL)

1. It is to use to make a public notice from CM-810 to CM-800S.
   Ex) Press“0”and then “#”to open all the lines of CM-800S.

Setup for CM-810.(Master Unit)

1. Choice of the ring type out of two.

2. Setup Ring-time duration

   • It is available to set ring-time when CM-810 receives a call from
     CM- 800S (from 1 to 20 Seconds).

3. Setup Method. (Ring type and ring-time duration).

   • Setup mode: Hold “*”button for 2 seconds and release it in standby mode

• Setup ring type out of two.
  “SD”sign and the number of unit in use blink in turn on the display when set- up mode is in.

  • Select 1 or 2 from Ten Key and then “#”to move on to ring- duration setup mode with saving.
  • Press “*”button to move on to ring duration setup mode without saving.

• Setup ring-duration

  • It is to setup the time of ring-duration of CM-810.
  • “tE”sign and the number of CM-800S in use blinks in turn on the display.
  • It is available to setup duration time from 1 to 20 seconds using ten- key.
  • Press “#”button after enter the time.
  • And then it becomes standby mode automatically.
  • Press “*”button to be out without saving.
  • Wrong registration makes “beep“ sound.

CM-800S (Sub-Unit)

1. Pressing the call button makes ring.
2. You can talk with CM-810 without any operation of CM-800S.
3. Pressing “privacy” button to stop delivering the voice from CM-800S to CM-810.

Wiring Method

CM-810 connecting terminal in rear side

Wiring

• Line Cord“ is used for wiring of CM-810.

1. 11P terminal: connect to LINE CORD 11P CONNECTOR.
2. 3P terminal: connect to LINE CORD 3P CONNECTOR.
3. Power: Power source, DC 12V is connected with LINE CORD.
4. CM-800S: connect to LINE CORD with 2 wires.(Max. of 300m)

12V, Trans type should be used as power source.

Specification

Item

|

Description

---|---
Wiring| To CM-800S : 2 wires (talk 2)
Rated Voltage| DC12V/ 1A
Transmission way| Half-Duplex
Display Consumption| –
Standby: 60mA
Max. : 370mA
Distance| CM810 – CM-800S : Max. 300m / (ø0.65㎜)
Working temperature| 10℃ -40℃

Customer support

COMMAX Co.,Ltd.

513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l BusinessDept.
Tel.; +82-31-7393-540~550
Fax.; +82-31-745-2133
Web site : www.commax.com

References

• 코맥스 - Smart Home & Security

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>