be quiet DARK ROCK PRO TR4 Instructions

: June 7, 2024
: be quiet

Table of Contents

Introduction
**General
- Assembly of the cooler mounting frame
- Mounting the CPU cooler
SCOPE OF DELIVERY
Warranty
Limited Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

be quiet DARK ROCK PRO TR4 Instructions

Introduction

Thank you for deciding to purchase a be quiet! product. The following instructions will guide you through the installation process. If you do encounter installation problems, please don’t hesitate to contact our customer services by mailing service@bequiet.com. Please note that be quiet! cannot accept liability for damage caused by compatibility problems.

AMD TR4
Installation video

**General

**

We recommend preparatory mounting of the cooler outside the PC case for subsequent installation.

Assembly of the cooler mounting frame

Place the TR4 spacer nuts (7) onto the socket bolts protruding through the front side and affi x the long TR4 mounting bracket (4) with the TR4 screws (8). Next assemble the opposite side with the short TR4 mounting bracket (5) as you did before.
cooler mounting frame

Mounting the CPU cooler

First remove the protective foil from the underside of the cooler. Spread the thermal paste (10) on the surface of the CPU. The amount supplied is suffi cient for one or two applications.
cooler mounting frame

Caution: The thermal paste supplied is not suitable for human consumption. If swallowed, drink lots of water and urgently nseek medical attention. Keep it out of the reach of children. Avoid contact with skin and eyes.
Position the Cooler mounting bridge (6) centrally on the cooler (1). Next place the cooler unit over the CPU. Loosen both heat pipe caps that are found in the middle of the topside of the cooler.
cooler mounting frame
Tighten the screws of the cooler mounting bridge alternately. You can use the cross-tip screwdriver (9) for this. Subsequently retighten both heat pipe caps on the topside of the cooler Fasten the 120mm fan (3) using fan clips (11) onto the front side of the cooler.
cooler mounting frame
Slide the 135mm fan (2) between the two heat sinks and fasten this with fan clips (11). Connect both fans using the Y cable (12). Connect this to the CPU fan connector on the motherboard.

SCOPE OF DELIVERY

Item,No

| ****|

Part name

|

Quantity

---|---|---|---

1

| |

be quiet! Dark Rock Pro TR4 cooler

|

1

2

| ****|

135mm fan

|

1

3

| ****|

120mm fan

|

1

4

| ****|

Long TR4 mounting bracket

|

1

5

| ****|

**** Short TR4 mounting bracket

|

**** 1

6

| ****|

**** Cooler mounting bridge

|

**** 1

7

| |

TR4 spacer nuts

|

4

8

| |

TR4 screws

|

4

9

| |

Cross-tip screwdriver

|

1

10

| |

Thermal paste

|

1

11

| SCOPE OF DELIVERY |

Fan clips

|

6

12

| |

Y cable

|

1

Warranty

3-year manufacturer guarantee for consumers (original purchase from authorized be quiet! dealers only)
Guarantee work can only be processed with a copy included of the purchase receipt from an authorized be quiet! dealer
Manipulation and structural changes of any kind, including any damage caused by external mechanical force, will lead to a complete voiding of the guarantee
Our General Warranty Conditions apply, which can be viewed on bequiet.com

Listan GmbH & Co.KG . Biedenkamp 3a . 21509 Glinde Germany For further information contact us via e-mail: service@bequiet.com

Limited Warranty

As per the terms and conditions of this limited warranty as given below, be quiet! warrants its new products to be free of defects resulting from faulty materials and faulty manufacturing for the length of the warranty period.

APPLICABILITY
This non-transferable warranty is applicable to newly purchased, previously unopened be quiet! products and is enforceable by only the original consumer purchaser. Proof of purchase is required for warranty service, so should be retained. be quiet! does not provide warranty registration services.
WARRANTY PERIOD
For eligible products, parts and labor are warranted for the applicable warranty period from the date of purchase. The applicable warranty period varies by product model, and is identified in your user documentation, on the product package, or as listed below. Should any of these warranty periods differ, the longest specified warranty period will apply. Replaced products will be warranted for the remainder of the original warranty period or thirty days, whichever is longer.
EXCLUSIONS
The following are not covered by the warranty:
Normal wear and tear.
Any product which has been modified without permission from be quiet!, or on which the serial number or warranty sticker has been defaced, modified, or removed.
Damage, deterioration or malfunction resulting from: Accident, abuse, misuse or improper use, neglect, connection to an improper voltage source, unauthorized product modification, or failure to follow instructions included with the product. Fire, water, lightning, or other acts of nature. Repair or attempted repair by anyone not authorized by be quiet!. Shipping or transport damage (claims must be made with the carrier). Any other cause which does not relate to a defect in materials or manufacturing workmanship.
Cartons, cases, batteries, cabinets, tapes, accessories or other consumables used with this product.
be quiet!, Inc. does not warrant that this product will meet your requirements. It is your responsibility to determine the suitability of this product for your purpose.
Removal or installation charges.
Shipping charges.
Any incidental charges.
EXCLUSION OF DAMAGES
be quiet’s sole obligation and liability under this warranty is limited to the repair or replacement of a defective product at its option. be quiet! shall not, in any event, be liable for any special, incidental, indirect, or consequential damages whatsoever, including but not limited to loss of profits, revenue, or data (whether direct or indirect), damages resulting from interruption of service and loss of business or for liability in tort relating to this roduct or resulting from its use or possession, even if be quiet! has been advised previously of the possibility of such damages.
LIMITATIONS OF IMPLIED WARRANTIES
There are no other warranties, expressed or implied, including but not limited to those of merchantability or fitness for a particular purpose. The duration of implied warranties is limited to the warranty length specified in Paragraph II.50
LOCAL LAW AND YOUR WARRANTY
This warranty gives you specific legal rights. You may also have other rights granted under local law. These rights may vary.
NO OTHER WARRANTY
No be quiet! employee, dealer, or other agent is authorized to make any modification, extension, or addition to this warranty.
TO OBTAIN TECHNICAL SUPPORT OR WARRANTY SERVICE
Please see your product owner’s manual or visit the service section at www.bequiet.com for details and contact information. You will need to provide proof of purchase for warranty service.