BOYA BY-M1V1 2.4GHz Dual-Channel Wireless Microphone System User Manual

2.4GHz Dual-channel
Wireless Microphone System
BY-M1V1/BY-M1V2/BY-M1V3
BY-M1V4/BY-M1V5/BY-M1V6
User Manual

General Introduction

The BOYA BY-M1V is an incredibly lightweight, ultracompact and easy-to-use 2.4GHz wireless microphone system for up to 2 people.
This mic series has RX/ RXD/ RXU port o f kits to choose from, delivering exceptional-quality sound to smartphones, tablets, DSLR cameras and camcorders. It provides a great solution for live streaming, content creation, mobile journalism and more.

Available Kits

Features

• Ultracompact and portable
• Up to 60m wireless operation range
• Easy-to-use clip-on TX transmitter/ RX receiver
• Compatible with smartphones, tablets, cameras, camcorders, etc
• Built-in mic for high-quality sound
• Ideal for 2-person interviews, podcasts & live streaming
• Selectable mono/stereo output

Product Structure

BY-M1V-TX: Clip-on Transmitter with Built-in Microphone

1. Status indicator

Note: If the microphone is muted when battery is low or charging, the indicator will display the current working status (Mute ON) instead of the battery level.
2. Built-in microphone
3. 3.5mm mic in jack
It can be connected to a 3.5mm TRS lavalier microphone.
4. USB-C charging port
Use the included USB-C charging cable to charge the unit.
5. Noise cancellation button
Short press to turn on/off noise cancellation.
6. Power/Mute/Pair button

7. Gain control (+-button)
Press the +/- button to adjust mic gain (totally 7 levels).
If the maximum/minimum level is reached, the indicator will quickly blink blue twice.
8. Belt clip

BY-M1V-RX: Camera-mountable Clip-on Receiver

1. Status indicator

2. 3.5mm TRS line output
Connect the BY-M1V-RX to a smartphone, tablet, camera, recorder or mixer with the included output cables.
3. USB-C charging port
Use the included USB-C charging cable to charge the unit.
4. 3.5mm headphone output
Connect headphones for audio monitoring.
5. Power/ Pair button

6. Mono/ Stereo switch
The output mode can be toggled between mono and stereo. When in mono mode, the audio from the left and right channel will be mixed. When in stereo mode, the audio from the left and right channel will be separated to the left and right of the stereo output.
7. Belt clip
BY-M1V-RXD: Compact Receiver with MFi Certified Lightning Connector

1. Lightning connector
It can be connected to an iOS Lightning device.
2. Status indicator

3. Pair & M/S pinhole
Use the included pin to click:
One click: switching between Mono and Stereo output mode.
When in mono mode, the audio from the transmitter, or transmitters will be mixed to both the left and right sides. When in stereo mode, the two transmitters’ audio output will be separated to the left and right sides.
Double click: enable pairing mode.
BY-M1V-RXU: Compact Receiver with USB-C Connector

1. USB-C connector
It can be connected to an Android Smartphone, Tablet, Computers or other USB-C devices.
2. Status indicator

3. Pair & M/S pinhole
Use the included pin to click:
One click: switching between Mono and Stereo output mode.
When in mono mode, the audio from the transmitter, or transmitters will be mixed to both the left and right sides. When in stereo mode, the two transmitters’ audio output will be separated to the left and right sides.
Double click: enable pairing mode.

Operation Guide

For the BY-M1V1/ BY-M1V2 Kit

1. Press and hold the power button for 2 seconds t o turn on the transmitter and the receiver.

2. Pairing
   Before leaving factory, the system is pre-paired. Therefore , the connection will be established once they are powered on. If they are disconnected, please follow the steps below:

3. Double-click the power button of transmitter and receiver to enter the pairing mode. The indicators o f both quickly blink blue 3 times.

4. Transmitter and receiver will be successfully paired within 5 seconds. The indicators of both will turn solid blue.

5. Repeat the above steps to pair another transmitter with the receiver.

6. Connect the receiver to the mic input of a camera, recorder or mixer with the included 3.5mm TRS to TRS cable; or connect it to a smartphone, tablet, or computer with the included 3.5mm TRS to TRRS cable.

7. You are ready t o record.

For the BY-M1V3/ BY-M1V4/ BY-M1V5/ BY-M1V6 Kit

1. Press and hold the power button for 2 seconds to turn on the transmitter.

2. Plug the BY-M1V-RXD into an iOS Lightning device or the BY-M1V-RXU into a USB-C device.

3. Pairing
   Before leaving factory, the system is pre-paired. Therefore, the connection will be established once they are powered on. If they are disconnected, please follow the steps below:

4. Double-click the power button of transmitter. The indicator quickly blinks blue 3 times.

5. Then, insert the included pairing pin into the small pinhole on the receiver and double click the button. The indicator o f receiver quickly blinks blue 3 times.

6. Transmitter and receiver will be paired within 5 seconds. After successfully paired, the indicator of transmitter will turn solid blue.

7. Repeat the above steps to pair another transmitter with the receiver.

8. You are ready t o record.

Note: Due to the 2.4GHz wireless frequency is widely used, the signal may be easily attenuated or interfered. Please try to avoid obstacles while using, such as walls and buildings. And keep away from the devices with 2.4GHz frequency, such as high-power Wi-Fi antennas, radios, etc.

Specifications

BY-M1V-TX

BY-M1V-RX

3.5 mm TRS Line Output Jack
Power Requirement| Built-in Li-ion Battery or USB-C DC 5V
Antenna| PIFA Antenna
Built-in Battery Life| Approx. 6 hours
Weight| 18g
Dimensions| 40.2×39.8×18.6mm
Operating Temperature| 0°C to 50°C
Storage Temperature| —20°C to 55°C

BY-M1V-RXD

BY-M1V-RXU

Packing List

BY-M1V1
1x BY-M1V-TX Transmitter
1x BY-M1V-RX Receiver
1x 3.5mm TRS to TRS Output Cable for Cameras
1x 3.5mm TRS to TRRS Output Cable for Smartphones
2x USB-C Charging Cable
1x Fur Windshield| BY-M1V2
2x BY-M1V-TX Transmitter
1x BY-M1V-RX Receiver
1x 3.5mm TRS to TRS Output Cable for Cameras
1x 3.5mm TRS to TRRS Output Cable for Smartphones
3x USB-C Charging Cable
2x Fur Windshield
---|---
BY-M1V3
1 x BY-M1V-TX Transmitter
1 x BY-M1V-RXU Receiver
1 x USB-C Charging Cable
1 x Fur Windshield
1 x Pairing Pin| BY-M1V4
2 x BY-M1V-TX Transmitter
1 x BY-M1V-RXU Receiver
2 x USB-C Charging Cable
2 x Fur Windshield
1 x Pairing Pin
BY-M1V5
1 x BY-M1V-TX Transmitter
1 X BY-M1V-RXD Receiver
1 x USB-C Charging Cable
1 x Fur Windshield
1 x Pairing Pin| BY-M1V6
2 x BY-M1V-TX Transmitter
1 x BY-M1V-RXD Receiver
2 x USB-C Charging Cable
2 x Fur Windshield
1 x Pairing Pin

1F0300300546

Documents / Resources

| BOYA BY-M1V1 2.4GHz Dual-Channel Wireless Microphone System [pdf] User Manual
BY-M1V1 2.4GHz Dual-Channel Wireless Microphone System, BY-M1V1, 2.4GHz Dual- Channel Wireless Microphone System, Dual-Channel Wireless Microphone System, Wireless Microphone System, Microphone System
---|---
| BOYA BY-M1V1 2.4GHz Dual Channel Wireless Microphone System [pdf] User Manual
BY-M1V1, BY-M1V1 2.4GHz Dual Channel Wireless Microphone System, 2.4GHz Dual Channel Wireless Microphone System, Dual Channel Wireless Microphone System, Channel Wireless Microphone System, Wireless Microphone System, Microphone System, System

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>