BLAUPUNKT CABIN LED LIGHT M18 Car Ambient Light User Manual
- June 12, 2024
- Blaupunkt
Table of Contents
BLAUPUNKT CABIN LED LIGHT M18 Car Ambient Light
Introduction
Illumination Sync:
If this feature is turned ON, the ambient light kit syncs with the status of
the main headlights of the vehicle provided the Orange lead is connected to
the Illumination lead of the vehicle.
Intelligent Voice Control: (Limited to dream colour version): This allows the
Ambient light kit to be controlled by voice
Rhythm Sensitivity:
With this option the sensitivity of the ambient light can be adjusted to match
the rhythm of the music (0 being the least sensitive and 7 being the most
sensitive)
Flashing Speed:
Set the frequency at which the ambient light ashes (1 being the slowest and 10
being the fastest)
Theme selection:
Choose different themes from the app
Reset (Limited to dream colour version): Restore factory settings
Control box pre-set:
The app can automatically identify the correct version of the ambient light
kit – full colour or dream colour. Should the auto identication fail, please
select the correct version manually.
Product Introduction
Thank You for choosing Blaupunkt Car Ambient LED Light System.
This manual will help familiarize you with the various features of the Ambient
LED light system. Please read it carefully before installation and use.
-
Main controller & related accessories
-
Side door controllers & related accessories.
-
Door Handle light & related accessories
-
Foot Well Lights & related accessories
-
Side door storage cavity light
-
LED light strip for doors
-
LED light strip for dashboard
Features & Specifications
- Power Consumption:10-30W
- Control box Input / Output Voltage: 12V/5V
- LED light strip voltage: 5V
- Light Color: 64 colours
- Application: Car Cabin Interior Mood Light Colour
- Function: Ambient Light with APP Control via BT
- Durability: More than 5000 hours
- Various mood light setting options
- Wireless connectivity between main control module & door control modules
- Universal application – suitable for all cars with +12V supply
Installation Diagram
Connection description of main controller
Note : Dashboard light strip can be cut to match it’s width. Please
connect the cut end to 07 connector.
Important : DO NOT connect to 07 connect if no changes are made to the
Dashboard Light Strip.
Connection description of side door controller
Remote Control Operation
Mode button(M):
Functions:
-
Start: short press
-
Turn off: long press
-
Mode switch: after starting, short press;
Equipped to provide preset patterns for the following loops:
RED → Yellow → Green → Cyan → Blue → Violet → White → Automatic (64 Colors) → Breathing (Colorful gradual change) → Burst ash (Colorful burst change) → Cheerful Rhythm → Soothing Rhythm → Red loop -
Turn off the dashboard light strip: long press 2 seconds
-
Turn on the dashboard light strip: long press 2 seconds
-
Main-Sub controller box pair: in OFF state, long press for 10 seconds
Here are some tips:
-
If the Main Controller works and the subsidiary Controllers do not turn ON (suitable for one box or all subsidiary controllers), it is recommended to try manual pairing
-
Manual pairing process takes about 5 seconds, during which the ambient lights will ash in white.
-
If the pairing is successful, all the lights will be red. If pairing fails, all lights will be blue.
-
If manual pairing fails once, please try again.
-
If there are two or more cars installed with the same ambient light kit in close proximity there could be an issue of interference between them and to prevent this it is recommended to follow below instructions:
a. After completing the installation and pairing for a particular vehicle, do not turn off the vehicle power and keep the ambient light in ON mode before proceeding to the next vehicle.
b. After completing the installation and pairing of one vehicle completely disconnect the positive and negative terminals of the car battery or disconnect the power connections of the main and subsidiary controllers , and then pair the next car
c. Keep the two vehicles approximately 40 meters apart. -
This kit has auto-pairing function, which means the main and subsidiary controllers will pair automatically when they are powered ON. If the main controller and all the subsidiary boxes pair normally and appear to be working properly, there is no need to manually pair them.
Brightness adjustment button (S):
This button is to adjust the brightness of the ambient light kit, there are 10
brightness level selection options with 0 being for lowest brightness, and 10
for brightest.
APP Menu Operation
Connection steps:
- Please download and install the “M18 LED” APP on your smart phone from iOS or PlayStore
- Bluetooth connection steps:
Please use your smartphone to search for the name of the Bluetooth device starting with “ Blaupunkt M18 “, to pair and connect with it.
Click “Settings”→ “Bluetooth search”→ Select → ” Blaupunkt M18″→ ”Connected”
Set interface
-
Ambient light switch: Here you can turn ON or OFF the ambient light kit with your phone via the APP
-
Full Colour: You can set the ambient light working mode you want. Refer below for each mode function introduction:
Single colour: in this mode, go to “Colour” to select any single colour you choose. In “Colour”, other than the 7 preset single colours, you can add any other colour you wish as new presets. Automatic: in this mode, the light colour will change among preset 64 colours gradually.
Breathing: in this mode, you can choose from 7 different colour presets for breathing ashing effect. Burst ash: in this mode, you can choose from 8 different colour presets for fast and sharp ashing effect. Music rhythm Sync- in this mode, the light will ash fast and according to any music or voice played in the car (the music can be from a phone or car audio system). Soothing rhythm: in this mode, the light will ash slowly and softly according to any music or voice played in the car(the music can be from a phone or car audio system).
Note : You can go to Settings → Rhythm sensitivity to adjust the response level to music/voice volume -
Brightness: Here you can set the ambient light brightness level (1 being minimum brightness & 100 being maximum brightness)
Uniform brightness: Uniform control of the brightness of all lights
Strip lights: Control the brightness of the dashboard light strip & side door light strip respectively
Other lights: Control the brightness of the door handle lights, side door storage pocket lights and the footwell lights respectively
Colour interface (in single colour mode)
Uniform color: Uniformly set the colours of all lights Strip lights: Set the
colour of the dashboard light strip & side door light strip respectively
Other lights: Set the colour of the door knob light, the side door storage
case light and the footwell light respectively
Area 1 :
Please select any colour on the colour wheel (64 colors)
Area 2 :
Select from any of the 7 prese colours, click on the corresponding colour to
display it on the ambient light kit
Area 3 :
- Post selecting any colour in the colour circle of area 1, click the ” “ button to save this colour in area 3
- Click on different custom saved colours to switch
- To delete a colour from the Custom Colour select the particular colour and click Delete
Setting Interface
Clear the paired configuration
Pairing succeeded
Congure Subsidiary Controllers:
To congure the main & the subsidiary controllers manually, please follow below
steps: “Subsidiary control box conguring”→ ”Clear subsidiary controllers box”→
“Congured subsidiary control box”
If it displays “congure success”that indicates pairing is complete
Customer Support
BPIN Private Limited
47, Atlanta Society, Nariman Point, Mumbai ‐ 400 021. Maharashtra. India.
Toll Free: 1800 209 6820 | info@blaupunktcar.in
| Shop Online at www.blaupunktcar.in
