BLAUPUNKT FCG801 Coffee Grinder Owner’s Manual

BLAUPUNKT FCG801 Coffee Grinder

IMPORTANT NOTES

• Before using this device read the instruction manual and follow the instructions inside. The manufacturer is not liable for any damages caused by the misuse of this device due to inappropriate handling.
• Please keep this manual for future reference.
• This device is for domestic use only. Do not use it for any other purposes.
• The device should only be connected to a socket with values corresponding to the values on the rating label.
• It is necessary to check if the total current consumption of all devices plugged into the wall outlet do not exceed the fuse in the circuit.
• If you are using an extension cord, make sure that the total power consumption of the equipment plugged into the extension cord does not exceed the extension cord power rating.
• Extension cords should be arranged in such a way as to avoid tripping hazards.
• Do not let the cord hang over the edge of the counter, or touch any hot surface.
• The device is not designed to be controlled via an external timer, separate remote control, or other equipment that can turn the device on automatically.
• Before maintenance work always disconnect the unit from the power supply.
• When unplugging the power cord from the electrical outlet, hold it by the plug only and remove the plug carefully. Never pull the cable as it may cause damage to the plug or power cord.
• Damage to the power cord or plug can lead to an electrocution hazard.
• Never leave the product connected to the power source without supervision.
• Never put the power cable, the plug or the whole device into the water or any other liquids.
• The device should be cleaned regularly complying with the recommendations described in the section on cleaning and maintenance.
• Do not place the device near sources of heat, flame, an electric heating element or a hot oven. Do not place it on any other device.
• The appliance must not be used by children. Keep the appliance and its cord out of the reach of children.
• The appliance may be used by individuals with limited physical, sensory or mental capability as well as those without knowledge of or previous experience in the use of similar appliances, provided such individuals are supervised or instructed about the safe operation of the appliance and are informed about the potential hazards.
• Additional precautions should be taken when using this device in the presence of children or pets. Do not allow children to play with the device.
• Never use the product close to combustibles.
• Never expose the product to atmospheric conditions such as direct sunlight or rain, etc… Never use the product in humid conditions (like a bathroom or camping house).
• The power cable should be periodically checked for damage.  the power cable is damaged the product should be taken to a professional service location to be fixed or replaced to prevent any hazards from arising.
• Never use the product with a damaged power cable if it was dropped or damaged in any other way or if it does not work properly.
• Do not try to repair the defective product by yourself as it can lead to electric shock. Always return the damaged device to a professional service to repair it.
• All the repairs should only be performed by authorized service professionals. Any attempted unauthorised repairs performed can be a hazard to the user.
• Only Original accessories should be used, as well as accessories recommended by the manufacturer.
• Using accessories that are not recommended by the manufacturer may result in damage to the device and may render the device unsafe for use.
• Use extreme caution with the very sharp blades.
• The coffee grinder is suitable for dry grinding only.
• Do not fill the mill bowl above the Max. level
• Keep the cable out of reach of children and babies to avoid the risk of electrocution and strangulation, keep the appliance and its cable out of the reach of children under 8 years of age.

The device is compliant with EU directives

• Low voltage directive (LVD)
• Electromagnetic compatibility (EMC)

The device marked CE mark on the rating label

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. Used appliances should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose of this appliance In the common waste bin.

Environmental information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam(buffer) and polyethylene (bags, protective foam sheet). Your system consists of material that can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. Your products are designed a manufactured with high-quality materials and components, which can be recycled and reused.

TECHNICAL DATA

• Power: 200W
• Power supply: 220-240V ~50-60Hz
• Maximum continuous operation time KB = 1 min
• Minimum interval time = 10 min

Product Overview

1. Body with motor
2. Mill bowl with blades
3. Cover
4. On/Off switch

BEFORE FIRST USE

1. Remove all papers, cartons and foils protecting the appliance and its parts.
2. Clean the appliance according to the recommendations contained in the CLEANING AND MAINTENANCE section.

USING THE MILL
The mill is suitable only for milling dry products, such as coffee beans and nuts. Place the mill bowl (2) on the body (1) and lock it by turning it right (clockwise). Put the products to be processed into the mill bowl (2). Place the cover (3) on the mill. Plug the power cord into an electric socket. Start the appliance by pushing the ON button (4). Unplug the appliance after the ingredients have been milled. Remove the cover (3). To make emptying the bowl (2) easier, it can be disconnected from the body (1) by turning it left (counter-clockwise).

CLEANING AND MAINTENANCE

Make sure the mill has been disconnected from the power source. Clean the body (1) with a mildly damp cloth and then wipe it dry. Do not submerge the body in water or other liquids. All elements, except for the body (1) with the motor, are suitable for cleaning with water and a dishwashing liquid.

Competence Center
2N-Everpol Sp. z o.o.
ul. Putawska 403A
02-801 Warsaw, Poland
phone: + 48 22 688 08 00
e-mail: info@everpol.pl
www.blaupunkt.com

All rights reserved. All brand names are registered trademarks of their respective owners. Specifications are subject to change without prior notice.

References

• WebTech - usługi IT

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>