CRYSTORAMA 1137-PB-CL-MWP 26 Inch Crystal Chandelier Instruction Manual

Crystorama.com

ASSEMBLY INSTRUCTION MODEL #1137-PB-CL-MWP

1. Alternating F & G Trim

Crystal Sets

A. 1 Piece. (3)14mm+(1)AS8-40mm Ball
B. 6 Sets. (1)Ring + (1)14mm + AS9-2.5″
C. 6 Sets. (1)Square + (1)14mm + AS9-2.5″
D. 6 Sets. (1)Ring + (1)Square + (7)14mm + AS9-2.5″
E. 12 Sets. (17)14mm
F. 6 Sets. (18)14mm
G. 6 Sets. (29)14mm
H. 71 Sets. (1)14mm+AS9-2″

WARNING:

Electrical Danger       Turn Power Off

All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes

You will need 12- Candelabra Base Bulb 40 Watts recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
The fixture is Damp rated

HOW TO INSTALL:

Place the fixture parts on a soft cloth-covered platform before installation of fixture.

1. To install the 6″arms, slightly loosen each screw on the metal plate.
   Pull a female plug through a hole in the upper metal plate.
   Connect the male plug at the end of the upper arm with the female plug that was just pulled. Push the end of the arm with the metal tab through the hole until stopped by the metal tab (this should also push the wires and plugs back inside the metal plate).
   Twist the metal tab counter-clock wise until both inserts lock onto the loose screws.
   Tighten the screw securing the arm in place. Repeat for all 6″arms.

2. Repeat Step 1 for the 10″ arms. The 10″ arms attaches on the bottom tier.

3. Place the metal washer, bobeche and metal washer in that order, over the distributor box-2. Secure with the finial.

4. Screw the Center column kit 1 onto the center column kit 2.

5. Attach the mounting bar onto the outlet box.

6. Decide the desired hanging height and adjust the chain to the correct length.

7. Raise the fixture up and do the wire connection. Attach the canopy over the mounting bar and secure with collar ring.

8. Dress the crystals as illustrated.

WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.p65warnings.ca.gov

Part Number

1. Outlet Box A
2. Female Plug
3. Male Plug
4. Arm with Metal tab
5. Plate
6. Screws

A.(1)-Mounting hardware

Wire connector ×2.
Mounting bar x1.
Lock washer ×1.
Hex nut ×1.
Nipple ×1.
Screw ×2.

B. (1)-Canopy (W5″xH1″)-XSN1130PBCAN5IN
C. (1)-Collar Ring
D. (1)-Collar Loop-XSN1130PBLOOP
E. (1)-Chain (4mmx72″)-XSN1130PBCHA4MM
F. (1)-Center Column Kit Loop
G. (1)-Center Column Kit 1

Top Bowl ; Ø6″,12pin,14mm center hole. -XSN1137PBDIBOB12PN
Glass Vase ; H8″
Top Bobeche ; Ø4″, no pin,24mm center hole. -XSN1137BOB4IN
Glass Vase ; H6″
Metal Cover ; H1.5″

H. (6)-6″ Arms with holder-XSN500GDARM6INKD
I. (13)-Bobeche; Ø4″, 5pin,24mm center hole. -XSN1137PBBOB4IN
J. (1)-Center Column Kit 2

Center Bowl ; Ø6″, 6pin,14mm center hole. -XSN1137PBDIBOB6PN
Distributor Box-1 ; Ø5″, 11mm center hole.
Glass Vase ; H6″
Bottom Bowl ; Ø6″, no pin,14mm center hole. -XSN1137DIBOB6IN
Distributor Box-2 ; Ø5″, 11mm center hole.

K. (6)-10″ Arms with holder-XSN500GDARM10INKD
L. (12)-Male Plug
M. (2)-Metal washer
N. (1)-Finial-XSN1130PBFIN
O. (12)-PVC candle sleeve ; H4

References

• Crystorama Lighting
• p65warnings.ca.gov

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>