CRYSTORAMA FUL-913-GA-CL Fulton 3 Light 23 Inch Antique Gold Bathroom Vanity Wall Light Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA FUL-913-GA-CL Fulton 3 Light 23 Inch Antique Gold Bathroom
Vanity Wall Light
Product Information
Product Model: MODEL#FUL-913-GA-CL
Product Name: Lighting the Way for Sixty Years
MODEL#FUL-913-GA-CL
Product Components:
- A. (1)-Mounting hardware
- B. (1)-Mounting plate
- C. (1)-Backplate W4-3/4”xH3/4”(XAR911GABKP4.75IN)
- D. (2)-Screw
- E. (3)-Socket ring 2-1/4 (XAR911GARING)
- F. (3)-Clear Glass shade 6(XAR911CLSHA6IN)
Product Features:
- Includes a metal frame
- Glass shade is 6 inches
- Requires 3 Medium Base Bulbs
- Recommended bulb wattage: 60 Watts
- Maximum bulb wattage: 100 Watts
- For extended use, LED bulbs are recommended
- The fixture is damp rated
- Product is compliant with the National Electric Code and local electrical codes
- This product may contain Lead which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information, visit www.P65Warnings.ca.gov
Product Usage Instructions
WARNING: Turn off the power before proceeding with any electrical installation.
- Step 1: Install the mounting plate to the outlet box using two outlet box screws.
- Step 2: Install the backplate onto the mounting plate and secure it with the provided screws.
- Step 3: Install the glass shade onto the socket and secure it with the socket ring.
- Step 4: Insert the bulb (not included) into the socket.
Note: It is recommended to use LED bulbs for extended use. Make sure to follow the recommended wattage limits of 60 Watts and a maximum of 100 Watts.
ASSEMBLY INSTRUCTION
All electrical components must be installed by a licensed electrician in
accordance with the National Electric Code and the appropriate local
electrical codes. You will need 3- Medium Base Bulb 60 Watts Recommended 100
Watts Max.
USE LED BULBS FOR EXTENDED USE THE FIXTURE IS DAMP RATED
How to install
- Install the mounting plate to the outlet box using two outlet box screws.
- Install backplate onto the mounting plate, and secure with the screws.
- Install the Glass shade onto the socket and secure with socket ring.
- Install the bulb(not included) into the socket.
WARNING: This product can expose you to Lead which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Wamings.ca.gov
Part Numbers
- A. (1)-Mounting hardware
- B. (1)-Mounting plate
- C. (1)-Backplate W4-3/4”xH3/4”(XAR911GABKP4.75IN)
- D. (2)-Screw
- E. (3)-Socket ring 2-1/4 (XAR911GARING)
- F. (3)-Clear Glass shade 6(XAR911CLSHA6IN)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>