OPT7 V1 Aura RV Underbody with Door Assist Lighting Kit Installation Guide

June 12, 2024
OPT7

OPT7 Logo V1 Aura RV Underbody with Door Assist Lighting Kit
Installation Guide

MAIN COMPONENTS

OPT7 V1 Aura RV Underbody with Door Assist Lighting Kit - MAIN
COMPONENTS

INSTALLATION

STEP 1
Decide where to locate the control box and ensure wiring has enough length for light bars to be installed in desired location.

IMPORTANT:
The control box must be installed inside the vehicle as it is not waterproof. Avoid installation areas of the engine bay + heated surfaces.
As shown below, connect all the LED bars to the control box with the included extension cables.

OPT7 V1 Aura RV Underbody with Door Assist Lighting Kit -
connect

IMPORTANT:
The extension wires are on the led bar. Lay out the bars to measure the length prior to install for a successful installation.
4 × 24” LED Bar + 8ft extension wire
2 × 18” LED Bar + 18ft extension wire
2 × 18” LED Bar + 8ft extension wire
HOW TO CONNECT POWER HARNESS TO YOUR VEHICLE

OPT7 V1 Aura RV Underbody with Door Assist Lighting Kit - POWER
HARNESS

  • Connect the Red line(+) of power hereness to the vehicle battery’s positive terminal.
  • Connect the Black line (-) of power hereness to the vehicle battery’s negative terminal or an unpainted area on your vehicle’s frame.

WARNING

  1. Connecting to more than 10 AMP will override the kit and cause early failure, ensure it is 10AMPs or less!!
  2. Please ensure that the LED bars or strips/control box/wiring all are mounted in areas where will not exceed 85℃ or 185℉.

STEP 2
Secure Control box in desired location with Velcro or zipties.
* CONTROL BOX NOT WATERPROOF Ensure the control box is safely and securely hidden from exposing elements of moisture.

OPT7 V1 Aura RV Underbody with Door Assist Lighting Kit - Secure Control
box

STEP 3
Mount brackets to secure the light bars first. Secure the light bars using the zip ties to tie all the wiring away from the moving components.

OPT7 V1 Aura RV Underbody with Door Assist Lighting Kit - Mount
brackets

IMPORTANT
BE SURE TO CONFIRM THE CORRECT DIRECTION OF THE ARROW!! TO AVOID PRODUCT DAMAGE DUE TO INCORRECT INSTALLATION.

OPT7 V1 Aura RV Underbody with Door Assist Lighting Kit - CORRECT
DIRECTION CORRECT INSTALLATION

STEP 4
Using the included E-Z Remote, select your desired color or pattern.

OPT7 V1 Aura RV Underbody with Door Assist Lighting Kit -
Remotewww.OPT-7.com

AUX WIRING FOR A DOOR/DOME LIGHT
Please scan to see a detail instruction on Door Assist Sync or go to https://wintis.ladesk.com/549690-AURA-Door-AssistAUX-Installation-Guide

http://qr.w69b.com/g/pa9DknB6g

DISCLAIMER

OPT7 Lighting is not liable for damages or personal injuries while installing this product. The Installation Guide is intended as assistance to reduce setup time. OPT7 Lighting assumes no responsibility for improper installation. If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance.
OPT7 recommends installation for safety and guidance.
Modified installations or installation recommendations not specified by OPT7 Lighting will void product warranty.

OPT7 Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals