LINDY 39313 4 Port HDMI 4K60 USB 3.0 and Audio KVM Switch User Manual

4 Port HDMI 4K60, USB 3.0 & Audio
KVM Switch
No. 39313
lindy.com
© LINDY Group – FIRST EDITION (September 2022)

Safety Instructions

! WARNING !
Please read the following safety information carefully and always keep this document with the product. Failure to follow these precautions can result in serious injuries or death from electric shock, fire or damage to the product. Touching the internal components or a damaged cable may cause electric shock, which may result in death. This device is a switching type power supply and can work with supply voltages in the range 100 – 240 VAC For worldwide usability four different AC adapters are enclosed: Euro type, UK type, US/Japan type and Australia/New Zealand type. Use the appropriate AC adapter as shown in the  picture and ensure it is firmly secured in place and does not detach by pulling before installing into a power socket.
To reduce risk of fire, electric shocks or damage:

• Do not open the product nor its power supply. There are no user serviceable parts inside.
• Only qualified servicing personnel may carry out any repairs or maintenance.
• Never use damaged cables.
• Do not expose the product to water or places of moisture.
• Do not use this product outdoors it is intended for indoor use only.
• Do not place the product near direct heat sources. Always place it in a well-ventilated place.
• Do not place heavy items on the product or the cables.
• Please ensure any adapters are firmly secured and locked in place before inserting into a wall socket

Instructions for Use of Power Supply

Attach the required adapter to the plug. Push the adapter firmly, twist until the latch secures the adapter. To remove, push the button and twist in the opposite direction.

Introduction

Thank you for purchasing the 4 Port HDMI 4K60, USB 3.0 & Audio KVM Switch. This product has been designed to provide trouble free, reliable operation. It benefits from both a Lindy 2-year warranty and free lifetime technical support. To ensure correct use,  please read this manual carefully and retain it for future reference.
The Lindy HDMI 4K60, USB 3.0 & Audio KVM Switch is a compact desktop solution for providing access and control over four HDMI equipped PCs, Servers or Laptops from a single keyboard, mouse and monitor.
HDMI 18G support allows for resolutions up to  4K@60Hz 4:4:4 while additional USB 3.0 devices can be connected to the dedicated ports. Speakers, headphones and a microphone can be connected to the 3.5mm audio ports on the front panel and the user can activate or deactivate analogue audio functionality simply by pushing a button.

Package Contents

• 4 Port HDMI 4K60, USB 3.0 & Audio KVM Switch
• 5VDC 3A Multi-country Power Supply (UK, EU, US & AUS), Barrel Size: 3.5/1.35mm DC Jack
• This Manual

Features

• Simple switching of HDMI and USB devices via push buttons & keyboard hot keys
• Supports resolutions up to 3840×2160@60Hz 4:4:4 with HDR10 and Dolby Vision
• USB 1.1 Type A ports for connecting USB mouse and keyboard and USB 3.0 Type A port for USB devices
• Supports HDMI audio pass-through
• 3.5mm audio microphone input and stereo output with on/off button and LED indicator

Specification

• Console Interfaces: HDMI (Female), 4 x USB Type A (Female), 2 x 3.5mm (Female)
• PC/Server Interfaces: HDMI (Female), USB 3.0 Type B (Female)
• HDCP Support: HDCP 1.4 & 2.2
• Supports 18Gbps transfer rate
• The USB 3.0 ports support up to 5Gbps transfer rate for USB devices (backwards compatibility with USB 2.0/1.1)
• Black, metal housing
• Operating Temperature: 0°C – 50°C (32°F – 122°F)
• Storage Temperature: -20°C – 60°C (-4°F – 140°F)
• Humidity: 5 – 80% RH (non-condensing)
• Power requirements: AC100-240V 50/60Hz
• Power consumption: 5W

Installation

Front & Rear Panels

Before starting the installation, please ensure that all devices are powered off.

1. Connect an HDMI monitor to the HDMI OUT port with an HDMI cable.
2. Connect USB Keyboard, Mouse and device to the designated USB ports on the front panel of the unit.
3. Connect speakers and a microphone to the 3.5mm audio ports on the front panel of the unit.
4. Connect the HDMI sources to the PC ports on the rear panel with HDMI cables.
5. Connect the USB 3.0 Type B PC ports on the rear panel to USB ports of PCs with USB 3.0 Type A to B cables.

Once all connections are made please connect the power supply to the DC/5V port and power on all devices.

Operation

This KVM switch features two methods of switching between sources: push button & hotkeys.
Front Panel Push Button
Press the Select button on the front panel for manual switching. The switching will be confirmed by a beep and the status LED of the active port will illuminate. To t urn off the beep signal, please refer to the keyboard hotkey switching options below.
Audio Control
Speakers or headphones and a microphone can be connected to the 3.5mm audio ports on the front panel. Audio functionality can be activated by pushing the on/off button near the audio ports. The status LED will light up when this function is activated.
Keyboard Hotkeys
Hotkey commands can be activated by pressing the leading code “Right Ctrl” + “Right Ctrl”.

“Scroll Lock”; to switch back to the default leading code  “Right Ctrl”, press leading code + “Right Ctrl” + “Enter”.
Leading code + “Num Lock”| Change leading code from “Right Ctrl” to “Num Lock”; to switch back to default leading code “Right  Ctrl”, press leading code + “Right Ctrl” + “Enter”.
Leading code + → or ↓| Switch to the next input port.
Leading code + ← or ↑| Switch to the previous input port.
Leading code + “Esc”| Reset to the factory default settings.

Troubleshooting

If any issues occur with the installation or operation of this device, please consult the following points for assistance.
No video is displayed.

• Check that all devices are powered on, if in doubt, turn off all devices and power them back on in the following sequence: KVM switch, display, source devices.
• Check that all HDMI connections between the display, KVM switch & source PCs are firmly secured within their respective ports.
• Remove & reconnect each the HDMI cables. This may be helpful as it will re-initiate the handshake between devices.
• Check the length of the HDMI cables in use. It is recommended that high quality, high speed HDMI cables are used up to a maximum length of 5m (16.4ft).

Hotkey sequences are not working.

• Hotkey sequences will not be validated if too much time elapses between keystrokes. For best results, please identify which hotkey sequence you require prior to inputting any commands. Each keystroke should take place within 2 seconds of the previous  one.
• Try with other leading codes; it can be changed from “Right Ctrl” (default) to “Scroll Lock” or “Num Lock” (see Hotkey table above).

Mouse, keyboard or devices are not working.

• Unplug and reconnect the mouse, keyboard and device in use.
• Ensure the PC is properly connected to the KVM switch using a USB 3.0 Type A to B cable.
• Check the length of the USB cables in use. It is recommended that USB cables are used up to a maximum length of 3m (9.84ft).
• There may be a compatibility issue with the connected keyboard and mouse, this can occur when using wireless peripherals. Please try using wired devices.
• Please ensure connected devices have a power consumption lower than 4.5W.

Recycling Information

WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products
Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter  the recycling process. Each individual EU member state, as well as the UK, has implemented the WEEE regulations into national law in slightly different ways. Please follow your national law when you want to dispose of any electrical or electronic products.  More details can be obtained from your national WEEE recycling agency.

CE/FCC Statement

CE Certification
LINDY declares that this equipment complies with relevant European CE requirements.

UKCA Certification
LINDY declares that this equipment complies with relevant UKCA requirements.

FCC Certification
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
You are cautioned that changes or modification not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

The enclosed power supply has passed Safety test requirements, conforming to the US American versions of the international Standard IEC 60950-1 or 60065 or 62368-1.

Hersteller / Manufacturer (EU):
LINDY-Elektronik GmbH
Markircher Str. 20
68229 Mannheim
Germany
Email: info@lindy.com, T: +49 (0)621 470050
Manufacturer (UK):
LINDY Electronics Ltd
Sadler Forster Way
Stockton-on-Tees, TS17 9JY
England
sales@lindy.co.uk, T: +44 (0)1642 754000 Tested to comply with
FCC standards.
For home and office use.
No. 39313
1st Edition, September 2022
lindy.com

References

• Lindy Electronics

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>