VITEK VTC-TNT5RFEA-2 Transcendent Series 5 MegaPixel Fixed IP WDR Turret Camera User Guide
- June 12, 2024
- VITEK
Table of Contents
VITEK VTC-TNT5RFEA-2 Transcendent Series 5 MegaPixel Fixed IP WDR Turret
Camera
Product Information
Product Name: Transcendent Series 5 MegaPixel Fixed IP WDR Turret Camera
Model Number: VTC-TNT5RFEA-2
Features
- 5 MegaPixel resolution
- Fixed IP camera
- Wide Dynamic Range (WDR)
- Weather resistant
- Supports MicroSD card
- Network connectivity
- Audio input and microphone
- Reset button
- /2.7” 5.0 Megapixel CMOS Image Sensor
- Up to 20fps@5MP (2880 × 1620), Up to 30fps@4MP (2560 × 1440), 3MP (2304 × 1296), 1080P (1920 × 1080), 720P (1280 × 720), D1, 480× 240, CIF
- 2.8mm Fixed Iris Lens
- Matrix IR (up to 100’ IR Range)
- rue Wide Dynamic Range (120dB)
- rue Mechanical Day/Night function by ICR
- D-DNR (3D & 2D-DNR) Noise Reduction
- Region Intrusion Detection, Object Abandoned / Missing, Scene Change Detection, Line Crossing, Video Blur, Video Color Cast Detection
- .265+ / H.265 / H.264+ / H.264 / MJPEG
- MicroSD Card Slot for Local Recording (Up to 256GB)
- 1 Ch. Audio In + Built-in Mic*
- Remote Viewing via CMS, IE (plug-in required)/Google Chrome/Edge/Firefox/Safari, and iOS & Android Apps
- ONVIF Compliant
- IP67 Weather Resistance
- Optional Wall Mounts (VT-TWMT-3, VT-TWMT-A1 [reqs. VT-TJB08]), Junction Boxes (VT-TJB01, VT-TJB08), and Pendant Mounts (VT-TPDMT-A1 [reqs. VT-TJB08], VT-TPDM-2 [reqs. VT-TJB01]) See additional mounting options on pg. 9
- 12VDC & PoE (Power over Ethernet) Operation
- 3-Year Warranty
Please research local, state and federal laws regarding the implementation of audio surveillance.
PLEASE NOTE:
Complete User Guide, Software, Tools, and Updates are available online. Scan
the QR Code or visit: http://www.vitekcctv.com/Downloads
Product Usage Instructions
Components and Accessories
| Component/Accessory | Quantity |
|---|---|
| Camera | 1 |
| Drill Template | 1 |
| Quick Guide | 1 |
| Rubber Plug | 1 |
| Screws | – |
| Waterproof Cap | 1 |
| Hex Wrench | – |
Overview
- Network Connector
- Audio Input
- Power Connector
- Mounting Base
- Locking Screw
- Mic
- MicroSD Card Slot
- Reset
Network Cable & Power Connections
First, connect the Weather Resistant Cap to an Ethernet patch cable. Then,
connect the camera to the Ethernet adapter. If not using PoE (Power over
Ethernet), also connect the power cable to an approved 12VDC power
supply.
Weather Resistant Network Coupler
- Loosen the nut from the Weather Resistant Network Coupler.
- Run the Ethernet cable through the coupler and attach an RJ-45 connector.
- Tighten the nut and coupler for a weather resistant seal.
Installation
Before beginning installation, ensure that the wall or ceiling is strong enough to withstand 3 times the weight of the camera.
MicroSD Card Installation:
- Attach the drill template to the place where you want to install the camera, then drill 3 screw holes and 1 cable hole (if you want to route the cables through the mounting base) according to the drill template
- Route the cables and connect the power & video cables, using the rubber plug to fill the gap of the mounting base, then secure the mounting base to the ceiling or wall with screws (see fig. 2 on next page).
- Loosen the lock screws, then adjust the camera to obtain the optimium viewing angle. Confirm the correct viewing angle with a monitor. Next, tighten the locking screw to secure the viewing angle adjustments.
LAN Configuration
The camera can be accessed on the local network either using the IP-Tool or directly in a web browser.
Switch – Network Cable – IP Camera – Router – Network Cable – Computer
MENU:
Computer
Accessing the Camera Using the IP-Tool
-
Make sure the camera and PC are connected to the LAN.
-
Locate and install the IP-Tool from the following link: IP-Tool Installer.
-
Open the installed application.
-
Modify the IP address. The default IP address is 192.168.226.201.
-
Click on the camera information in the table to display the network information on the right side.
-
Modify the IP address and gateway of the camera to match the computer’s local network segment.
-
Input the administrator password (default: 123456) and click the Modify button to save the settings.
-
Make sure the camera and PC are connected to the LAN.
-
Locate the IP-Tool installer at www.vitekcctv.com/Downloads/Soft-ware/Transcendent-IPTool_v2.0.2.zip, then install on the PC. Open the installed application.
-
Modify the IP address. The default IP address is 192.168.226.201. Click the information of the camera listed in the above table to show the network information on the right side. Modify the IP address and gateway of the camera and make sure its network address is in the same local network segment as the computer’s. Please modify the IP address of your device according to the practical situation.
For example, the IP address of your computer is 192.168.13.4. So the IP address of the camera shall be changed to 192.168.13.X. After modification, please input the password of the administrator and click “Modify” button to modify the setting. Default admin password: “123456″. -
Double-click the IP address and then the system will pop up the web browser to connect IP-CAM . IE browser will download the Active X control. After downloading, a login window will pop up as shown below:
Input the user name and password to log in.
Default user name: admin / Default password: 123456.
Directly Access Through a Web Browser
The default network settings are as shown below:
IP address: 192.168.226.201
HTTP: 80
Subnet Mask: 255.255.255.0
Data Port: 9008
Gateway : 192.168.226.1
You may use the above default settings when you log in the camera for the
first time.
-
Manually set the IP address of the PC. The network segment should be the same as the default settings of IP-CAM. Open the network and share center. Click “Local Area Connection” to pop up the following window.
Select “Properties” and then select Internet protocol according to the actual situation (for example: IPV4). Next, click “Properties” button to set the network of the PC.
-
Open the IE Browser and input the default address of IP-CAM and confirm. The IE browser will download Active X control.
-
After downloading Active X control, the login dialog box will pop up.
-
Input the default username and password and then enter to view.
WAN Configuration
Access the camera by the router or virtual server for example.
- Make sure the camera is connected to the LAN; Then log into the camera via LAN and go to System Congfig→Network Config→Port menu to set up the port number.
- Enter System Config→Network Config→IP Address menu to modify the IP address.
- Go to the router’s management interface through IE browser to forward the IP address and port of IP-CAM in the “Virtual Server”.
- Open the web browser and input its WAN IP and HTTP port to access the IP-CAM.
- For additional setup, features and functions, please scan the QR code on the front page of this quick guide and download the complete manual.
Locking Screw Cover:
- Attach the drill template to the desired installation location.
- Drill 3 screw holes and 1 cable hole (if routing cables through the mounting base) according to the drill template dimensions.
- Route the cables and connect the power and video cables.
- Use the rubber plug to fill the gap in the mounting base.
- Secure the mounting base to the ceiling or wall using screws.
VTC-TNT5RFEA-2 Detailed Specifications
Please research local, state and federal laws regarding the implementation of audio surveillance.
OPTIONAL ACCESSORIES AND RELATED PRODUCTS FOR VTC-TNT5RFEA-2
TRANSCENDENT NVRs
A Standalone Solution with Analytic Support and NDAA Compliance!
- 8MP (4K) HDMI Output
- H.265S / H.265+ / H.265 / H.264 Video Compression
- Analytic Support Including Basic Face Detection, License Plate Recognition, and More!
- Available in 4, 8, and 16 Channels
- Up to 24TB Depending on Model (12TB per HDD)
- PoE Support on ALL Models
Also Consider Vitek NDAA Compliant Wireless Access Points to Reduce Costly
Cable Installation!
VT-WAP1150 and VT-WAP2150 High Speed 5.8GHz DIP AP / CPE Wireless Bridge w/
8MB Storage, 64MB RAM, 150MBps transmission, and Point-to-Multi-Point (P2MP)
Topology
With high speed transmission of 150Mbps and a wireless range of 3000ft. (VT-
WAP1150) and 1.25 miles (VT-WAP2150) these products eliminate the need for
expensive and troublesome long-distance cables in areas where CCTV monitoring
and rigorous surveillance take place. These small, lightweight and durable
units are easy to install and easy to use with an innovative and
straightforward 10-button plug-and-play dip switch that facilitates the
creation of a robust wireless network without a computer. Set-up can be simply
configured for point-to-point or point-to-multipoint topology depending on the
application, with up to 128 IP group configurations!
LIMITED PRODUCT WARRANTY
VITEK products carry a three (3) year limited warranty. VITEK warrants to the purchaser that products manufactured by VITEK are free of any rightful claim of infringement or the like, and when used in the manner intended, will be free of defects in materials and workmanship for a period of three (3) years, or as otherwise stated above, from the date of purchase by the end user. This warranty is nontransferable and extends only to the original buyer or end user customer of a VITEK Authorized Reseller. The product must have been used only for its intended purpose, and not been subjected to damage by misuse, willful or accidental damage, caused by excessive voltage or lightning. The product must not have been tampered with in any way or the guarantee will be considered null and void. This guarantee does not affect your statutory rights. Contact your local VITEK Reseller should servicing become necessary. VITEK makes no warranty or guarantee whatsoever with respect to products sold or purchased through unauthorized sales channels. Warranty support is available only if product is purchased through a VITEK Authorized Reseller.
28492 CONSTELLATION ROAD VALENCIA, CA 91355
WWW.VITEKCCTV.COM
Version 1.1
June 2022
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>