HYUNDAI VS 100 Bag Sealer Instruction Manual
- June 4, 2024
- HYUNDAI
Table of Contents
HYUNDAI VS 100 Bag Sealer Instruction Manual
22/12/2021
HYU 07/2021
Dear customer, thank you for purchasing our product. Please read the operating instructions carefully before putting the appliance into operation and keep these instructions including the warranty, the receipt and, if possible, the box with the internal packing.
GENERAL SAFETY INSTRUCTIONS
GENERAL PROVISIONS:
- Consider the instructions for use as a part of the appliance and pass them on to any other user of the appliance.
- Check whether the data on the type label corresponds with the voltage in your socket. The power cord plug may only be connected to the electrical socket complying with the applicable standards.
- This appliance may only be used by children aged 8 years or older, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Children younger than 8 years must be kept out of reach of the appliance and its power cord.
- Do not leave the appliance running without attendance and check it during the whole process of welding!
- Before replacing accessories or accessible parts, before assembly and disassembly, before cleaning or maintenance, turn off the appliance and disconnect it from the mains by pulling the power cord from the power socket!
- Always unplug the appliance from power supply if you leave it unattended and before assembly, disassembly or cleaning.
- Never use the appliance if the power cord or power plug are damaged, if the appliance is not correctly operating or if it has fallen on the floor and been damaged, or if it has fallen into water. In such cases take the appliance to a professional service centre to verify its safety and correct function.
- Pay careful attention when handling the appliance to avoid injury, (e.g. burns ).
- The appliance has a hot surface. Persons insensitive to heat must be careful when using the appliance.
- When the appliance is in operation, prevent pets, plants or insects from getting in contact with it.
- The appliance is intended for home use and for similar purposes (in shops, offices and similar sites, in hotels, motels and other residential premises, or in facilities providing bed and breakfast service). It is not intended for commercial use!
- Do not plug the power cord in the electrical socket and do not unplug it with wet hands or by pulling the power cord!
- Do not place any objects on the appliance.
- Never immerse the appliance into water or any other liquid (even its parts)!
- Avoid contact with the sealing wire when hot.
- CAUTION – Do not use the appliance with a program, time switch or any other part that turns the appliance on automatically as there is a risk of fire if the appliance is not covered or placed properly.
- All text in other languages and pictures shown on the packaging, or the product itself, are translated and explained at the end of this language mutation.
- WARNING: There is a risk of injury in case of incorrect use (not in accordance with the manual) of the appliance.
- The producer does not undertake any responsibility for damage caused by improper use of the appliance (e.g. deterioration of food, injury, burning, scalding, fire, etc. ) and its guarantee does not cover the appliance in the case of failure to comply with the safety warning above.
USE OF THE APPLIANCE:
- After completion of the vacuum process leave the cover of the appliance open for the welding part to cool down.
- CAUTION – The appliance is not designed for constant operation. Do not use the welder constantly for longer than 15 minutes, then leave it to cool down for approx. 10 minutes.
- It is not intended for outdoors use.
- The appliance must not be used in damp or wet environment and in any environment with the danger of fire or explosion (spaces where chemicals, fuels, oils, gases, paints and other flammable or volatile materials are stored).
- Prevent penetration of liquid inside the air exhaustion section A4!
- Do not seal fluids in liquid state. If you want to store liquid food (such as soups), first freeze the food in an appropriate container, cut the food into pieces, put in bags and seal/ vacuum them. Put the individual bags into freezer.
- Do not place the appliance on unstable, fragile or flammable surfaces (e.g. glass, paper, plastic, wooden varnished boards and various fabric/table cloths ).
- Use the appliance in the working position only at places with no risk of turning over and in sufficient distance from heat sources (e.g. heater, stove, cooker, oven, grill ), flammable objects (e.g. curtains, drapes, etc. ) and wet surfaces (e.g. sinks, wash basins, etc. ).
POWER CORD:
- If the power cord of the appliance is corrupted, it has to be replaced by the manufacturer, its service technician or a similarly qualified person so as to prevent dangerous situations.
- Never put the power cord on hot surfaces and never let it hang over table edge or worktop edge. If the cord is caught or pulled, e.g. by children, the appliance may overturn and fall down, causing a serious injury!
- The power cord must not be damaged with sharp or hot objects, open fire, it must not be sunk into water or bent over sharp edges.
- If you need to use an extension cord for justified reasons, it must be undamaged and comply with the applicable standards.
- Check the condition of the power cord of the appliance regularly.
- In order to ensure safety and proper function of the appliance, use only original spare parts and accessories approved by the manufacturer.
- Only use this appliance for the purpose it was designed for, as specified in this manual. Never use the appliance for any other purpose.
DESCRIPTION OF THE CONTROLS
A – bag sealer body
A1 – lid
A2 – buttons for releasing the lid
A3 – welding part
A4 – the sucking area
A5 – sealing gasket
A6 – airproof loop of sponge
A7 – port for air extraction
B – control panel
B1 – sealing button ( SEAL )
B2 – vacuuming + sealing button + STOP function
B3 – vacuuming ( BAGS ) (used to evacuate reusable bags using hose C )
B4 – button for selecting the type of food ( FOOD )
B5 – signal lights for the selected type of food
B6 – vac Seal indicator light
B7 – seal function indicator light
B8 – Bags vacuum function light
C – extraction hose
COMPATIBLE ACCESSORIES:
Spare plastic rolls for bag sealer ETA176200010 (width 28 cm) and GALMSV250BAG (width 25 cm)
Reusable bags 10 pcs 23×21 cm; 10 pcs 23×28 cm; 5 pcs 30×28 cm ETA176290025
Bags 20 x 30 cm (50 pcs) ETA176292030
Bags 25 x 35 cm (50 pcs) ETA176292535
Bags 30 x 40 cm (50 pcs) ETA176293040
INSTRUCTIONS FOR USE
Remove all packaging materials and take out the appliance. Remove all adhesive foils, stickers or papers from the appliance.
BAG SEALER FUNCTIONS
-
Sealing (B1 button)
After activation, the sealer will produce a strong uniform seal. -
Vacuuming + sealing (B2 button)
After activating this function, the sealer will first exhaust air and then produce a strong uniform seal. -
Vacuuming (button B3)
It is used to extract air from the vacuum bag using the suction hose. After activation and application to the bag, it sucks air out of the resealable bag. -
FOOD B4 button for selecting the type of food
It is used to set whether you wish to vacuum-pack dry food or moist food.
The setting is indicated by the appropriate indicator light B5 :
Dry = dry food (lights up when the appliance is switched on, indicates the default on state)
Moist = Moist food (not the liquid itself!)
FUNCTION INTERRUPTION
To interrupt an activated function, it is necessary to press the B2 button.
USE (Fig. 2)
Connect the appliance to the mains.
- Press A2 button and open the lid A1.
- Put foil/bag into the sealer with the open part ahead (into the exhaustion section). If you make a bag from a bag roll (both ends are unsealed), first put the bag in the sealer so that its end does not reach the vacuuming area, and then seal it! Then seal/ vacuum the other end (after the bag is fulfilled) in the standard manner.
- Close the lid A1 and push the lid edges down to lock it (a click will be heard).
- Press the button with the required function ( B1 , B2 or B3 ). The operation of the function is signaled by the LEDs B6 , B7 and B8.
- When the light goes out, the welder’s function is complete. You may open the lid A1 (first press A2 button) and remove the foil/bag.
Note
- If sealing function is activated, air is exhausted for a short time.
- When using hose C with reusable bags, follow the preview in figure 1 (connect the hose to hole A7 and use function B3 ).
Notice
- Proper functionality of the appliance is assured only when using the foils/bags supplied by the manufacturer. Request these foils at your retailer. Do not use plastic bags. At the same time you can re-weld many foods in their original packaging (eg bags of potato chips).
- The vacuum sealer is used to seal cling foil up to the max. width of 300 mm.
CARING FOR YOUR VACUUM SEALER
Do not clean appliance if is hot. After each use, wipe the outer parts with a damp soft cloth. To clean the inner parts of the appliance, wipe all pieces of food and liquids with a paper cloth. Leave to dry properly before next use. Do not use abrasive and agressive cleaning agents! If the power cord becomes stained, wipe it with a damp cloth. The colour change of the surface in time is normal. This change does not change the qualities of the surface in any way and is not a reason to return this appliance! If particles of plastic adhere to the sealing wire, wipe them off carefully to avoid damage to the wire. If can help to carry out a sealing operation the lid and pressing fully down without a bag in position. This will heat the wire and soften any plastic adhering to it.
BAGS
Before reusing a bag, we recommend properly washing it in warm water with a small amount of dishwasher detergent, and rinsing in clear water. Place the bag so that water can flow out from inside the bag. Before reusing, dry the bag thoroughly.
If the gaskets A5 and A6 are damaged, please contact the authorised
service centre.
Expert service must do the large maintenance or to intervene into inside
parts of the appliance! Non-observance of the instructions of the manufacturer
cancels the right for guarantee repair!
If you are unable to fix the problem, or if you need any further information about the appliance or service centres, please contact your distributor.
TECHNICAL DATA
Voltage (V) | shown on the type label of the appliance |
---|---|
Absorbed power (W) | shown on the type label of the appliance |
Weight (kg) approximately | 1 |
Protection class of the appliance | II. |
Size, (mm): | 370 x 100 x 65 |
Input in standby mode is < 0,50 W
The manufacturer reserves the right to change the technical specifications and accessories for the respective models.
WARNING: DO NOT USE THIS PRODUCT NEAR WATER, IN WET AREAS TO AVOID FIRE OR INJURY OF ELECTRIC CURRENT. ALWAYS TURN OFF THE PRODUCT WHEN YOU DON’T USE IT OR BEFORE A REVISION. THERE AREN’T ANY PARTS IN THIS APPLIANCE WHICH ARE REPARABLE BY CONSUMER. ALWAYS APPEAL TO A QUALIFIED AUTHORIZED SERVICE. THE PRODUCT IS UNDER A DANGEROUS TENTION.
HOUSEHOLD USE ONLY. DO NOT IMMERSE IN WATER OR OTHER LIQUIDS. TO AVOID DANGER OF SUFFOCATION, KEEP THIS PLASTIC BAG AWAY FROM BABIES AND CHILDREN. DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES OR PLAYPENS. THIS BAG IS NOT A TOY.
Disposal of old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems).
This symbol on the product or on its packaging indicates that this product (or battery/accumulator) shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.
WARNING: HOT SURFACE
Licensed by HYUNDAI Corporation Holdings, Korea
Imported by ETA a.s., náměstí Práce 2523, 760 01 Zlín, CZ
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>