CRYSTORAMA 8105-AG_CEILING Paxton Four Light Ceiling Mount Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA 8105-AG_CEILING Paxton Four Light Ceiling Mount
Product Information
- Model: 8105-AG_CEILING
- Part Number: MODEL #8105-AG_CEILING
- Manufacturer: Crystorama
- Website: crystorama.com
This product is a hanging ceiling fixture designed for indoor use. It requires electrical installation by a licensed electrician in compliance with the National Electric Code and local electrical codes. The product includes various components such as mounting hardware, canopy, crystal bobeches, fabric shade, sockets, and crystal balls.
Caution: This product contains Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information, visit www.P65Warnings.ca.gov
Product Usage Instructions
Hanging Installation:
- Insert the shade spoke in between the top and bottom knurled nut.
- Secure the shade by twisting the top knurled nut.
- Slide the crystal bobeche over the socket.
- Install the recommended bulbs (4-Candelabra Bulb 60 watts Max, not included) into each socket.
- Screw the crystal ball into the bottom frame.
Semi-flush Installation:
- Hook the canopy onto the loop on top of the fixture.
- Raise the fixture up to the ceiling and connect the wires.
- Secure the canopy onto the outlet box using ball nuts.
For Hanging
For Ceiling
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate
You will need 4-Candelabra Bulb 60 watts Max Bulb not included
USE LED BULBS FOR EXTENDED USE
This fixture is DRY rated
How to Install
- Insert the shade spoke in between top and bottom knurled nut.
- Secure the shade by twisting the top knurled nut.
- Slide the crystal bobeche over the socket.
- Install the recommended bulbs into each socket.
- Screw the crystal ball into the bottom frame.
For Semi-flush
- Hook the canopy onto the loop on top of the fixture.
- Raise the fixture up to the ceiling and connect the wires.
- Secure the canopy onto the outlet box by ball nuts.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov
Part Numbers
- A. Mounting Hardware
- (1)Mounting Plate
- (2)Mounting Screws
- (3)Wire Nut
- B. (1)Canopy;5°×5×0.7h; XMO8105AGCAN5IN
- C. (2)Ball nut
- D. (1)Chain; 72″L × 04.0mmT;XMO8105AGCHA4MM
- E. (1)Fixture Loop
- F.(2)Knurled Nut
- G. (1)Fabric Shade:16″×16″×7″h;XM08105SHA16IN
- H. (4)Socket
- 1.(4)Crystal Bobeche
- J.(4)Small Crystal ball
- K.(1)Big crystal ball
