CRYSTORAMA 8109-PN Paxton Eight Light Chandelier Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA 8109-PN Paxton Eight Light Chandelier
8109-PN Paxton Eight Light Chandelier
Product Information
The Model #8109-PN is a crystal chandelier from Crystorama. The chandelier
requires 8 candelabra bulbs with a maximum of 60 watts each. The electrical
components must be installed by a licensed electrician in accordance with the
National Electric Code and appropriate local electrical codes. The product
comes with a mounting plate, mounting hardware including screws, wire nut and
wall anchors, crystal beech and crystal ball.
Product Usage Instructions
- Ensure that all electrical components are installed by a licensed electrician in accordance with the National Electric Code and appropriate local electrical codes.
- Attach the mounting plate to the ceiling using the provided screws and wall anchors.
- Lock the canopy onto the mounting plate and connect the wires.
- Slide the crystal bobeche over the socket.
- Place the shade on the candle sleeve and install the recommended bulbs into each socket.
- Screw the crystal ball into the bottom frame.
- Ensure that the chandelier is securely attached to the ceiling and all electrical connections are properly made before turning on the power.
Note: The product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov
ASSEMBLY INSTRUCTION
MODEL #8109-PN
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
You will need 8-Candelabra Bulb 60 watts Max Bulb not included
How to Install
- The mounting plate is fixed to the ceiling with screws.
- Lock the canopy on the mounting plate and connect the wires.
- Slide the crystal bobeche over the socket.
- Put the shade on the candle sleeve, Install the recommended bulbs into each socket.
- Screw the crystal ball into the bottom frame.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov
PART NUMBER
- MODEL #8109-PN
Part Numbers
- Mounting Hardware
1. Mounting Plate
2. Mounting Screws
3. Wire Nut
4. Wall anchor
5. Wall anchor screws
6. Screws- (1) Canopy;21″x5″x0.75″h;XMO8109PNCAN21IN
- (2)3IN Rod;Ø0.5″xL3″;XMO8109PNROD3IN
- (2)6IN Rod;Ø0.5″xL6″;XMO8109PNROD6IN
- (2)12IN Rod;Ø0.5″xL12″;XMO8109PNROD12IN
- (2)18IN Rod;Ø0.5″xL18″;XMO8109PNROD18IN
- (4)Knurled Nut
- (1)Fabric Shade;38″x16.8″x9.5″h;XMO8109SHA38IN I.(8)Socket
- (8)Crystal bobeche
- (3)Crystal ball
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>