KevinLAB KVL-C3-K01 LPWA System User Manual
- June 3, 2024
- KevinLAB
Table of Contents
KevinLAB KVL-C3-K01 LPWA System
Power Connection
- Prepare a 12V/1A adapter.
- After Plugging the adapter into the AC outlet, connect the DC plug of the DC adapter to “DC IN“ of the product.
- When the power connection is completed, the red LED on the top of the products lights up
Connecting a measuring instrument
- Prepare a measuring instrument.
- Connect the measuring instrument and the product. with dedicated cable through “METER” terminal
Terminal Description
- Left 3.5mm round terminal: “METER” – External meter connection.
- Central 2.5mm round terminal: “UART” – monitoring and setting.
- Round terminal in the right square: “DC-IN” – Power connection.
Specification
- The revised User Manual does not contain the FCC required warning statements. a. Rule Part 15.19(a)(3): This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation. b. Rule Part 15.21:
- The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>