HIS KB-M2-P90 Flat Panel Mount Keyboards Instruction Manual
- June 10, 2024
- HIS
Table of Contents
HIS KB-M2-P90 Flat Panel Mount Keyboards
Product Information:
The KB-M2-P90, KB-R2-P90, and KB-R3-P90 Series Flat Panel Mount Keyboards are
designed to be mounted onto a panel for efficient use of space. These
keyboards are compatible with both USB and PS2 connections and come with 16 M5
locknuts for installation.
The maximum panel thickness allowed for the keyboard is 6.0 mm (1/4). The
keyboard dimensions are 416.1 mm (16.38) in width and 200.7 mm (7.90) in
height. The rear collar measures 30.9 mm (1.21) in diameter.
Product Usage Instructions:
- Using the dimensions provided in Figure 1, cut a mounting pattern into the panel where the keyboard will be installed. Ensure that the panel thickness does not exceed 6.0 mm (1/4).
- Remove the 16 locknuts from the back of the keyboard and set them aside. Temporarily remove the rear collar from the keyboard.
- Insert the keyboard into the panel and reattach the rear collar.
- Tighten all 16 locknuts until the gasket is compressed to a thickness of 1/16 to 3/32.
Once the keyboard is installed, connect it to your device using either a USB or PS2 connection. The USB connection cable is 4.6 m (15 FT) long, while the PS2 connection cable is 1.8 m (6 FT) long.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>