Jarvisen JT-2-black Translator 2 Black Portable Smart Electronic User Guide

JT-2-black Translator 2 Black Portable Smart Electronic
User Guide

JT-2-black Translator 2 Black Portable Smart Electronic

Exterior Function Introduction [Front]

Exterior Function Introduction [Back]

Home page function

• Click or hold down the voice key on the screen to translate the speech.
• You can also hold down the volume button to speak and release to translate. (You need to click ”  “in the lower right comer of the screen 1o turn on the function of “volume button reused as speech button”)

More functions
You can see more functions by clcking the icon or Swiping the screen from left to fight.
Photo translation
You can switch to photo transiation by clicking the icon or swiping from righ to left.
Red button
Hold down the red button and Say “Hello”, then raease to ransiate.
Blue Button
Hold down the biue buton and  Say “Hola” then release to transiate;
Language
Ciick the Language button to selec other languages.

Voice Translation—button free

Pick up to speak and put down to translate.
Pick up the translator so that the top front is close to mouth, about 10cm away. When you hear the “beep” sound, start to speak, and then move the translator away from the mouth beyond 10cm away to trigger the translation.
When using this function, please click “ ” in the lower right corner of the voice translation interface to ensure that the “button-free translation” function is turned onPick up to speak and put down to translate.
Voice Translation—button free
Hand out to automatically broadcast translation and receive sound.
After finish speaking, you can hand out the translator to show and broadcast the translation to the other party in full screen. At the end of the broadcast, the translator will automatically record, recognize the other party’s voice and translate.After finish speaking, you can broadcast the transation and automatically receive the other party’s voice.

Photo Translation

Full-screen framing, shooting and instant translation.

• Full screen mode: select the language to translate, and affer pressing the shutter, it can directly translate the text into the target language
• Smear mode: select the language you need to translate and press the shutter to smear the text of the area you need to translate into the target language.

More applications

Click the icon in the upper left corner of the home page, or slide the page from left to right to see more applications and settings.

Quick setting

You can swipe down from the top status bar to see more quick sefting.

Accessories

Accessories include: Type~C data cable, SIM pin, instruction manual and protective case.

Product information

Product specification

Hardware Parameters

Size and weight

Charging battery

Frequently Asked Questions

“ Q1. Inaccurate identification or translation resuits?

Answer: Please avoid using itin noisy environment If the surrounding environment is noisy, you can try to speak close to the microphone.

• Q3. How to export translation records?

+ Q4. How to connect to global Internet ?

*+ Q5. How to change the font size?

Q6. How to download the offline language package?

« Q7. Why the translator is charging abnormally?

Answer: The charging specification is 5V 2A. Please use a power adapter that meets the standard and purchase through official channels. If the battery of the translator is discharged due to long-term non-use, it needs to be continuously charged for more than half an hour, and then try to switch on.

This guide s for reference only, and the software will be continuously upgraded. Please refer to the physical object.

Safety Instructions

Please read all the following safety information before using this product:

1. Please do not use this product outdoors in thunder storm weather.
2. The product package contains small objects, so please putit out of the reach of children, and don’t let children use it alone.
3. Please don’t use it while driving, 5o as not o distract attention and lead to traffic accidents.
4. The charging specification is 5V 2A. Please use a power adapter that meets the standard test and is purchased through regular channels.
5. Please keep the translator in a dry and cool environment, and do not use organic solvents and ofher liauids to clean this prodluct.
6. The operating temperature of the transator is between-10 C and 45 C. If the operating temperature exceeds this temperature range, the translator may be damaged and the battery lfe wil be shortene.
7. Please do not disassemble the battery or modfy the charger without permission. The battery of the translator can only be replaced by Hillsdale Technology Company or its authorized service provider.
8. Any radio transmiting equipment (including this product) may interfere with the use of improperly protected medical equipment. Please consult medical personnel or medical equipment manufacturers to ensure that the relevant regulations are observed when the use of electronic equipment is prohibited. At the same time, for users who are equipped with pacemakers and hearing AIDS, please use them carefully according to the corresponding medical equipment regulations.
9. Please don’tjust rely on the translator as a communication tool in an emergency, such as medical aid. The translation resuls provided by the transiator are for reference only and do not constitute any form of quarantee.
10. Safety information related to product privacy can be viewed in the “Settings-Privacy” of the translator.
11. Our company s only responsible for the official system and update system, and any unofficial third-party system will have security risks.

Derechos De Autor  Hillsdale Technology LLC, Calfornia, EEUU 2023 Todos Los Derechos Reservados.

After-sales contact information

Company name:| Hillsdale Technology LLC,
California, USA
---|---
Official Website:| https://www.jarvisen.com 
Email:| support@jarvisen.com 
Customer Service Tel:| +1(202)996-7882
Company address:| 3182 Campus Drive, Unit  266, San Mateo CA 94403,United States

Legal&Regulatory

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Important: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These iimils are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is 1o guarantee that interference will not ocour in a particular instalation.
If this equipment does cause harmiul interference to radio o television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Conslt the dealer or an experienced radiof TV technician for help.

The device complies with RF specifications when used near your body at a distance of 10 mm.Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement.
Note: For more legal and e-labeling information, check on your device from Settings > Systems and Updates > About

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>