Sonoff L2 LED Strip 5m WiFi User Manual

: June 4, 2024
: SonOFF

Sonoff L2 LED Strip 5m WiFi User Manual

Dear customer,

Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

✉ www.alza.co.uk/kontakt

✆ +44 (0)203 514 4411
Im p o r te r __ Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

Features of the Smart LED Light Strip

SMD5050 LED Breads; FPCB Circuit Board; Every 3 LED lights in one
Main Colors of the Light: Red/Blue/Green

Operating Instruction

Clean the surface
Tear the backing tape
Adhere it to the surface
Download the eWeLink App
Power on
Pull out the insulation sheet, then long press “on” button for 5s until the light strip “flashes”, which means it enters the Bluetooth Pairing Mode.

The device will exit the Bluetooth Pairing mode if not paired within 1min. If you want to enter this mode again, long press the “on” button on the remote controller for 5s until the light strip “flashes” and release.

Add the device

Specifications

Input Voltage	DC 12V
Luminous Flux	≥300lumens/m
Beam Angle	L1: 140° L1 Lite: 120°
Working Humidity	≤95%
Material	FPCB
Light Decay	Less than 3% after 1000 hours constant

work

LED QTY| 30LEDs/m
Life Expectancy| > 25000 hours
Operating Temperature| -15°C ~ 50°C
Protect Range| L1: IP65

L1 Lite: IP20

Power Adapter

Input	100-240V AC 50/60Hz 0.6A Max
Protection	Anti-overvoltage, Anti-overload, Anti-

overtemperature

Output| DC 12V 2000mA

Wi-Fi Controller

Input	DC 5-12V
Remote Control	24 Keys IR Remote Controller
Remote controller battery	3V(CR2025)
App operating systems	Android & iOS
Power	24W (36W Max)
Wi-Fi	IEEE 802.11 b 2.4GHz
Bluetooth	5.0 BLE

When the Wi-Fi is not available, the device will automatically switch into Bluetooth control (Ensure Bluetooth is enable on your mobile phone).

Re-establish Pairing

Long press “on” button for 5s until the light strip “flashes”, which means it enters the Bluetooth Pairing mode and you can pair again.

Factory Reset

**** Deleting the device on the eWeLink app indicates you restore it to factory setting.

Safety Warning

Before using this product, please makes sure that your voltage is appropriate for this product’s working Using this product with a voltage other than the one specified may damage the product and cause safety hazards.
LED Light Sources are unchangeable, please don’t dismantle
While the Light Strip is working, it will generate heat so please keep it in a cross ventilation environment for heat

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty

conditions, for which the claimed claim may not be recognized:

Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the
Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries, etc.).
Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies,
If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.