SWIT LB-SU 75-90 Rechargeable Li-Ion Battery Pack User Manual

SWIT LB-SU 75-90 Rechargeable Li-Ion Battery Pack User Manual

Congratulations on your purchase of this product. Please read this user manual carefully.

Warning

Keep in mind the following precautions to avoid fire and other safety hazards!

• Do not use battery in fire or hot places to prevent overheating, cracking and other hazards.
• Please do not pierce the battery shell or try to open the shell and decompose the battery.
• Do not use battery beyond charge, discharge and storage environment temperature.
• Do not charge the battery in the car or in direct sunlight
• Do not use damaged battery.
• Do not squeeze the battery shell which may cause physical damage.
• Make sure the power-consuming equipment(s) meet the battery specifications.
• Use SWIT charger or SWIT recommended charger to charge the battery to avoid overheating or break.
• Keep out of the reach of children.

Caution

• Fully charged battery will discharge naturally and please use it as soon as it gets charged.
• The battery may become warm in use or while being charged. This is normal.
• Never expose the battery to temperature above 60°C
• Keep the battery terminals clean and never short-circuit the battery terminals.
• When stored for a long time, please keep the battery power capacity beyond 50%.
• Battery will automatically enter the sleep mode if rest in 10 days, the output will be shut off. Press the button to restore output.

Features

• The battery pack is applicable with SONY PXVV-Z280, PXW-FS7, PXW-X280.etc.
• 5V/2A USB output.
• D-tap DC output, to power the camera and other equipment simultaneously.
• 4-level LED power indicator to display the battery remaining capacity percentage and low-voltage alarm warning.
• High performance rechargeable lithium ion battery, no memory effect.
• Build-in multiple protective circuit design.

Description of appearance

1. Electrode interface
2. TAP input/output socket
3. Power check button/USB output button
4. 4-level LED power indicators
5. USB output socket

Charging

• The battery pack can be charged by SWIT LC-D421U via bottom terminals, or SWIT PC-U130B and SWIT PC-U130B2 via D-tap socket.
  Please pay attention to the positive and negative of the D-TAP socket. Do not reverse the connection.

• The battery can be charged at a temperature range of 0-40°C, but we recommend charging at a temperature range of 10-30°C to ensure the best performance of the battery.

Discharging

• The battery can discharge at a temperature range of -20°C-50°C, but it is suggested to discharge at a temperature range of -10°C -40°C for the best performance of the battery.
• Four LEDS show the battery remaining capacity (25%, 50%, 75%, and 100%), when the battery lasts less than 15 minutes on the equipment, 25% LED indicator will flash red to alert, and please change battery asap.
• Close the rubber cover to keep the socket away from dust.

Specification

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>