KUZCO EC17609 LED Exterior Ceiling Installation Guide
- June 4, 2024
- KUZCO
Table of Contents
LED Exterior Ceiling
EC17609
INSTALLATION SHEET
START FROM HERE
- Make sure POWER is COMPLETELY OFF at the fuse box
- Have your fixture installed by a qualified licensed electrician
- Prepare everything in a clear area
- Wear gloves at all times during this installation
- Read instructions carefully before you start assembly
- Keep this installation sheet for future reference
Please Note:
- This Kuzco LED fixture comes with pre-wired LED module(s)
- Unless instructed, Do Not touch any part of the LED module(s) as any unnecessary contact with the module could cause permanent damage
- Use ELV (Electronic Low Voltage) type of dimmer for dimming application
- Must be installed on a covered ceiling
- 120V input
Technical Support: 1-855-855-8926
1. Remove fixture from its original packaging
2. Separate the mounting plate ( 1c ) from the fixture ( 2a ) by
removing the set screws ( 2f ) with allen key
3. Attach mounting plate ( 1c ) to electrical junction box ( 1a )
using junction box screws provided ( 1e ) in hardware package
4. Make proper electrical connections ( black to hot “L”,
white to neutral “N”, ground to “ GND ”) with wire nuts (
1b ) provided in hardware package
5. Secure fixture ( 2a ) to mounting plate ( 1c ) with set screws
( 2f ) and allen key
19054 28th Avenue Surrey, BC Canada V3Z 6M3
T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196
W: kuzcolighting.com
20200414
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>