Taylor Swoden 300104 IAZ Electric Glass Water Kettle Instruction Manual
- June 4, 2024
- Taylor Swoden
Table of Contents
Taylor Swoden 300104 IAZ Electric Glass Water Kettle
IMPORTANT SAFEGUARDS
-
Read these instructions carefully and save them for future use.
-
For additional protection, we recommend the use of a power outlet with a rated current of 10A. To avoid circuit overload, do not operate another high wattage appliance on the same Circuit.
-
Do not fill the kettle when it is on the base unit. Dry the water on the bottom of the kettle before placing it back on the base unit.
-
Never leave the appliance unattended when in use.
-
Close supervision is necessary if you use your appliance when children or infirm persons are nearby.
-
The kettle must be operated on a flat surface. Do not place this appliance on or near a hot gas or electric burner or on top of other electric appliances.
-
Use the handle, and do not touch hot surfaces. Be aware that steam will be emitted from the spout or lid, especially when you are refilling the kettle. Do not litt the lid during the boiling cycle.
-
Do not use the kettle to heat anything other than water. Do not fill it above the “max” line, and do not use the kettle if the water is below the “min” level.
-
Do not let the power cord hang over the edge of the table or touch hot surfaces. Always store the excess portion of the power cord in the compartment of the base unit.
-
Do not immerse any part of the appliance in water or any other liquid. Do not use your appliance with an extension cord unless this cord has been checked and tested by a qualified technician or service person. Always plug your appliance into a power outlet with the voltage indicated on it.
-
If the power cord is damaged, it must be changed by the manufacturer or other authorized persons.
Note: If the kettle is overfilled, boiling water may spurt out. The kettle may only be used with the base unit provided.
Warning: Do not switch the kettle on if there is a possibility that the water in the heater is frozen. -
Always unp water in it, when you are filling it with water, when it is not in use, and before cleaning or moving It.
-
Never repair the appliance yourself. WARNING: To reduce the risk of fire or electric shock, do not remove the bottom cover of the body or the base unit by yourself.
-
Do not use a base unit other than the one supplied. The use of accessory attachments not recommended by the manutacturer may result in fire, electrical shock, or personal
injury. -
Do not insert any object into the slots or holes of the kettle.
-
This appliance is for household use only. Do not use outdoors.
-
This appliance can be used by children aged 8 years and above it they have been given supervision or instruction concerning safe use and understand the hazards involved.
Cleaning and maintenance must not be carried out by children unles they are older than 8 and supervised. Keep the appliance and its cord out of reach of children under 8
years old. -
This appliance is intended to be used in household and similar environments, such as:
- Staff kitchen areas in shops, offices, and other Working environments:
- Farmhouses;
- By clients in hotels, motels, and other
- residential-type environments;
- Breakfast-type environments.
-
WARNING: Do not remove the lid while the water is boiling.
-
CAUTION: Position the lid so that steam is directed away from the handle.
-
CAUTION: Ensure that the appliance is switched off before removing it from the base unit.
-
CAUTION: Be careful to avoid spilling water on the connector.
-
Incorrect use of the appliance may cause serious burns; therefore, care must be taken.
-
Do not try to access the kettle’s container as the heating element surface remains hot after use.
-
Appliances can be used by persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning safe use and understand the hazards invoved.
-
Children must not play with the appliance.
TECHNICAL SPECIFICATION
PRODUCT OVERVIEW
BEFORE FIRST USE
Remove all packaging materials. Fill the kettle to the “max” line and bring to the boil. When the unit completes the boiling cycle, throw the water away. Repeat this process 2 or 3 times to remove any dust or residue remaining from the manufacturing process.
OPERATION INSTRUCTION
- Place the kettle on a flat, dry, anti-slip surface.
- Remove the kettle from the base unit.
- Open the kettle by pressing the lid opening button on the lid. Fill the kettle with the desired amount of water. Do not fill above the “max” or below the “min” line.
- Completely unrol the cable, place the appliance on the base unit, and plug it into the mains. Warning: the appliance heats up during use.
- Press the ON/OFF switch to boil. The indicator light will light up when the switch is on.
- When the water boils, the appliance switches off automatically and the indicator light turns off.
- Disconnect the appliance from the mains. The lid must be shut when water is being poured out.
NOTE When the switch is turned off, do not force it back on as this will seriously damage the operating mechanism.
MAINTENANCE AND DESCALING
- Always unplug the kettle and allow it to cool down before cleaning.
- Do not use chemical, steel wool, or abrasive cleaners to clean the outside of the kettle, as these will scratch the surtace. The surtace of the kettle may be wiped with a damp cloth and polished with a soft dry cloth.
- Do not immerse the kettle or base unit in water or other liquids.
- To prolong the kettle’s operational life, regularly clean the mineral deposits inside it.
- Pour 0.3 White vinegar into the kettle, fill with water, and allow to stand for over 1 hour.
- Empty the kettle, and wipe off the remaining deposits with a damp cloth.
- Fill the kettle with clean water, bring it to a boil, and throw the water away.
- If necessary, repeat the operations above several times.
TAYLORTECH INC.
16192 COASTAL HWY
LEWES, DE 19958
http://www.TAYLORSWODEN.COM
MADE IN CHINA