DSP-50AY1(MK) Portable Compressor Fridge

Product Information

Specifications

• Model: DSP-50AY1(MK)
• Single Zone
• DC Cable included
• Bracket Assembly included
• 2 Wheels included
• 2 Rubber feet included
• 3 Screws included
• 2 Screw nuts included
• Plate hand included

Product Usage Instructions

1. Unboxing and Assembly

1. Open the package and take out all the components.

2. Attach the bracket assembly to the main unit using the provided
   screws and screw nuts.

3. Attach the wheels to the bottom of the unit.

4. Place the rubber feet on the bottom of the unit, if
   desired.

2. Power Connection

1. Locate the DC Cable.

2. Connect one end of the DC Cable to the power input port on the
   main unit.

3. Connect the other end of the DC Cable to a power source.

3. Control Panel and Display

The control panel and display are located on the front of the
main unit. Use these controls to configure and monitor the
operation of the product.

Frequently Asked Questions (FAQ)

1. What should I do if I encounter a communication error

between the display panel and control board?

If you experience a communication error, please follow these
steps:

1. Disconnect the power source.

2. Check all connections between the display panel and control
   board.

3. Ensure the connections are secure and properly inserted.

4. Reconnect the power source and try again.

SINGLE ZONE:DSP-50AY1(MK)&DSP-65AY1(MK) DUAL ZONE:DSP-75AY1(MK)&DSP-95AYA(MK)
Please read and understand this manual completely before using this product.

DC Cable

Bracket Assembly

Wheels x2pcs

Rubber feet x2pcs Screws x3pcs

screw nuts x2pcs

Plate hand

4

E9

Communication error between

display panel and control board

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>