ring RBWP001 Outdoor Smart Plug User Manual

: June 6, 2024
: Ring

Table of Contents

Installation
IMPORTANT PRODUCT INFORMATION
SAFETY INFORMATION
Product Specifications
IMPORTANT PRODUCT INFORMATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

RBWP001 Outdoor Smart Plug
User Manual

Let’s get started.
Quick Start

Download the Ring app. The Ring app walks you through setting up and managing your Outdoor Smart Plug.
Set up and install your Ring Bridge. Your Bridge connects your Outdoor Smart Plug to the Ring app.
Open the Ring app and tap Set Up a Device. Select Outdoor Smart Plug and scan this QR code. Then, just follow the in-app instructions to install and set up this device.

QR+FR

Installation

Connect your Outdoor Smart Plug to a weatherproof GFCI outlet. Place it with the outlets facing down, at least 2 ft. above the ground. You can secure your device to the wall with the included hardware.
Plug your devices in. If you’re only using one outlet, seal the other outlet with the included cover. For additional help, visit: ring.com/help

IMPORTANT PRODUCT INFORMATION

Safety and Compliance Information Use Responsibly.
Read all instructions and safety information before use.

SAFETY INFORMATION

FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE.
Please read and follow this safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
Do not attempt to disassemble, repair, or modify the device. Do not use the device where wireless devices are not allowed. For outdoor usage, use this product with ground fault circuit interrupter (GFCI) outlet. Risk of electric shock. Do not open. No user serviceable parts inside. Refer servicing to qualified service personnel.
WARNING

The timer could turn on unexpectedly without the user being present.
To Reduce the Hazardous Condition– Unplug the appliance that is plugged into the receptacle(s) controlled by the timer before servicing.
Risk of Electric Shock. Do not plug into another relocatable power tap or an extension cord.
When plugged into a grounded 3-prong outlet, always ensure that the housing is facing downward and is at least
DO NOT expose to heavy rain or immersed in water or any other liquid.
DO NOT remove the ground pin (middle pin) or use with a 3-to 2-prong adapter.
DO NOT use with devices that should not be operated unattended, such as power tools.
DO NOT use in precision timing applications where inaccurate timing could be dangerous (sunlamps, Saunas, etc).
Keep children away from smart plugs and outlets.
No Serviceable parts inside. DO NOT open or tamper with the unit.
Do not discard the stopper, the plug should be covered when the socket is not in use.
Remove smart plug from the outlet before cleaning.
DO NOT clean with liquid.
DO NOT exceed the recommended electrical ratings.

Do not defeat the safety purpose of the grounding-type plug. A grounding-type plug has two blades and a third grounding prong. The grounding prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Pursuant to Section 15.21 of the FCC rules, changes or modifications to a Product by the user that are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device meets the FCC Radio Frequency Emission Guidelines. Information on the product is on file with the FCC and can be found by inputting such Product’s FCC ID (which can be found on the device) into the FCC ID Search form available at fcc.gov/oet/ea/fccid.
The party responsible for FCC compliance is: Ring LLC, 1523 26th St, Santa Monica, CA USA, 90404.
INFORMATION REGARDING EXPOSURE TO RADIOFREQUENCY ENERGY:
The output power of the radio technology used in the Product is below the radio frequency exposure limits set by the FCC. This device should be installed and operated with a minimum distance of 20cm between the radiator and your body. It is advised to use the Product in such a manner that minimizes the potential for human contact during normal operation.

Product Specifications

Device Name: Ring Smart Lighting
Outdoor Smart Plug
Model Number: 5E22E9
Operating Temperature: -20°C~50°C (-4°F~122°F)
Operating Humidity: 10%~90%RH, Non-condensing
Storage Humidity: 5%~90%RH, Non-condensing
RECYCLING YOUR DEVICE PROPERLY:
In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of, or recycle, your device in accordance with your local laws and regulations. For information about recycling your device, go to amazon.com/devicesupport.
Terms of Service and Warranty
By purchasing or using the product, you agree to the Terms of Service found at ring.com/terms.
For information on our warranty and Ring Protect Plans, see ring.com/legal.

QUICK START GUIDE 300G C2S

IMPORTANT NOTES : Please check this artwork proof thoroughly, including all copy, colors, cutter guides, and legal/mandatory information, prior to approval. If you have any questions relating to this or if you require any guidance on checking artwork proofs, please let us know and we will happily advise. Please notify us immediately if you have any concerns regarding this file.

IMPORTANT PRODUCT INFORMATION

FOR UNITED STATES CUSTOMERS
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Information on this device is on file with the FCC and can be found by inputting the device’s FCC ID into the FCC ID Search form available at https://www.fcc.gov/oet/ea/fccid. The output power of the radio technology used in the Products is below the radio frequency exposure limits set by the FCC. Nevertheless, it is advised to use the product in such a manner that minimizes the potential for human contact during normal operation. This device should be installed and operated with at least 20 cm between the radiator and your body.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. For information about recycling your device, go to www.amazon.com/devicesupport

FOR CANADIAN CUSTOMERS
Innovation, Science and Economic Development Canada (ISED) Compliance. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
Information Regarding Exposure to Radio Frequency Energy
This equipment complies with IC RSS-102 RF exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.