Arlux 739982 INDUS Highlight User Guide

Arlux 739982 INDUS Highlight

Product Information

• Product Model Numbers:
  • 3297027399829, 3297027399942,
  • 3297027399959, 3297027399966, 3297027399980, 3297027399997,
  • 3297027400006, 3297027400051, 3297028505106, 3297028505120,
  • 3297028505212, 3297028505250, 3297028505267
• Power Output: 150W
• Efficiency: > 80
• Protection Rating: IP65
• Input Voltage: 230V
• Dimensions:
  • 30.5×16 cm
  • 50.5×13 cm
  • 41×8 cm
  • 30×12.2 cm
  • 23x15x7 cm
  • 41.3 cm D48.6×22 cm

Product Usage Instructions

1. Ensure that the input voltage is compatible with the product’s specified voltage (230V or 90/305V).
2. Place the product in a suitable location with sufficient space for ventilation and installation.
3. Connect the product to a power source using the appropriate power cable.
4. Ensure that the product is properly grounded to prevent electrical hazards.
5. Once connected to power, the product can be turned on using the designated power switch or button.
6. Adjust the product’s settings, if applicable, according to the desired usage requirements.
7. Ensure that the product is used within the specified operating temperature and humidity range.
8. Follow any additional safety instructions provided in the user manual or product documentation.
9. If experiencing any issues or abnormalities with the product, refer to the troubleshooting section of the user manual or contact customer support for assistance.
10. When not in use, disconnect the product from the power source and store it in a safe and dry place.

Instructions for use

• Electrical products must not be thrown out with domestic waste. They must be taken to a communal collecting point for environmentally friendly disposal in accordance with local equlations. Contact vour local authorities or stockist for advice on recclina.
• Product conforms to European Union Directives
• Earth: green/vellow wire
• Compatible with a light dimmer
• Light source replaceable by a professional(LED only)
• Power supolv reolaceable by a professional
• This oroduct contains a light source of eneray class C.

Installation

• The installation of the product must be carried out by an electrician or any other shock. qualified person and in accordance with the standards in force in the country of – Before use, make sure that the product has not been damaged. If deterioration installation.
• To proceed with the installation or any maintenance or upkeep, turn is noted, do not use the product. off the electrical network.
• If the cable or flexible external cord of this luminaire is damaged, it must be
• Do not look directly at the light source. replaced exclusively by the manufacturer or its maintenance agent or any person
• Never touch the product when it is in use, or when it has just been turned off. of equivalent qualification, in order to avoid any risk.
• Do not use a damaged or modified power cord to avoid any risk of fire, electric
• Indoor or outdoor use.

BUTTON

WIRING

INSTALLATION

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>