Moukey MPS4 Karaoke Speaker User Manual

USER MANUAL
MPS4 Karaoke speaker

SAFETY INSTRUCTIONS

To ensure safe use, please read this instruction carefully before using this product and use it in the right way according to the instruction. Please keep this instruction properly for future reference.  Power: The product can only work with the power supply that is indicated in this instruction or specified in the product.

No Heavy Objects & Overheating: Do not place heavy objects on the product. It should avoid sun burning and keep away from hot sources. Do not put it in high temperature or moist conditions.Power Line Protection: The power line should not be stepped, squeezed or dragged.Don’t use a low power voltage regulator or regulated power supply, to avoid burning down the product or the regulated power supply. This product is only suitable for use in places below 2000 meters above sea level. It may cause dangerous risks when it is used over 2000 meters above sea level.

Mind Electricity Shock: Don’t plug or unplug the power supply with wet hands to prevent electric shock.

Rear Plate Disassembly: Please do not disassemble the rear plate. If repair is needed, please ask the professional to operate it.

Non-use Period: If you do not use this product for a long time, please turn off the power and unplug the power supply.

The Speaker Top: Don’t place objects like vases or containers filled with liquid. Please maintain air ventilation to dissipate heat. This product is only suitable for use under non-tropical climate conditions. It may cause dangerous risks when it is used under tropical climate conditions.

PARAMETER & DATA

1. Mobile Speaker System
   High-powered PA speaker style
   Wireless music media function
   Multi-color automatic flashing LED party lights
   Built-in rechargeable battery
   FM radio with digital display screen
   Aux (3.5mm) input
   USB, TF flash card reader
   1/4″ microphone input
   Battery energy LED indicator light
   Suitable for indoor and outdoor party, crowd control, karaoke

2. Wireless Streaming Media
   Simple and relaxing matching
   Suitable for present newest devices like mobile phone, tablet, laptop and computer, etc.
   Wireless connection version: 5.0
   Wireless connection name: Moukey MPS4

3. **Package Includes Speaker**
   1, Wireless microphone2, Instructions”, Type C charging cable1, Shoulder strap ‘1

4. Specifications
   Max Power: 50W
   Sound System: 6.5″ Woofer. 2″ Tweeters
   Impedance: 4 Ohms
   Frequency Response: 55-20kHz
   SIN Ratio: 76dB+/-3dB
   SPL: 94dB (1W/M) 1.1-LD.: <2.8%(1W)
   USB Type: 2.0
   Digital Audio Document Support: MP3
   Max USB Flash Support: 32G
   Battery Life: About 4 hours (Charging time: about 5 hours)
   Rechargeable Battery: 3.7V/3600mAh
   Dimensions (L x W x H): 232 x 130.5 x 360.7 mm

INSTRUCTIONS FOR FUNCTION & OPERATION

1. TREBLE: Treble adjustment and the screen will display

2. BASS: Bass adjustment and the screen will display

3. MIC IN : Wired microphone input

4. AUX: Aux audio input (the screen will display

5. MIC VOL: Microphone volume adjustment

6. ECHO: Echo adjustment and the screen will display

7. Charging Port: Type C DCSV/1A charging port. Use the charging cable that came with your device and make sure it’s connected properly

8. Power Volume Knob: The power knob doubles as a volume knob (the screen will display
   Power on/off: Turn knob clockwise/counterclockwise to the end to power on/off the speaker
   Volume adjustment: Turn knob clockwise/counterclockwise to increase/decrease the volume level

9. TF: TF card input port (Up to 32GB)(the screen will display TF)

10. USB: USB input port (Up to 32GB)

11. :

1. Short press to play previous song
2. Short press to play previous channel in FM mode
3. Long press to fast backward in USB/TF mode

12. :
    1 Short press to play or pause
    2 Short press for automatic searching channel in FM mode
    3 Long press for automatic searching another MPS4 in TWS mode

13. :

1. Short press to play next song
   (2) Short press to play next channel in FM mode
   (3) Long press to fast forward in USB/TF mode

14. MODE:
    1 Used for mode selection. Default BT mode when powered on and screen will display Short press to switch FM mode, LINE mode, USB mode, and TF mode
    2 Long press to switch the effect of disco light

15. LED Indicator:

1. The indicator LED will be red when charging
2. The indicator LED will be off when fully charged

16. Magic Voice: Switch various voice effects
17. Mic Volume Up: Increase mic volume
18. Mic Volume Down: Decrease mic volume
19. Mic On/Off: Long press to switch Ori/Off
20. Mic Charging Port: Type C port, and please ensure charging it with DCSV/1A

TWS CONNECTION OPERATION

In BT Mode:

1. Power on Speaker A and Speaker B which are in BT mode, then turn on the Bluetooth of your device and connect to Speaker A.
2. Long press the TWS button of Speaker B to enter TWS pairing mode, then Speaker A and Speaker B will automatically pair with each other (wait for about 30s).
3. To exit the TWS mode, choose any one of the speakers and long press the TWS button to disconnect TWS.

In Other Input Modes:

1. Power on Speaker A and Speaker B.
2. Speaker A access the audio source to be played.
3. Choose any one of the speakers and long press the TWS button to enter TWS pairing mode, then Speaker A and Speaker B will automatically pair with each other (wait for about 30s).
4. To exit the TWS mode, choose any one of the speakers and long press the TWS button to disconnect TWS.

Note:

1. Our TWS function only supports connecting two same Bluetooth speakers together which means Speaker A and Speaker B must be the same model.
2. In TWS mode, Speaker A and Speaker B will play the same audio, and the volume of the two speakers can be adjusted synchronously. However, the treble, bass, and light effect still need to be controlled independently.
3. In TWS mode, the mic sound on Speaker A will not be synchronized by Speaker B, and the mic sound will only be played by Speaker A.

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
   (1) This device may not cause harmful interference, and
   (2) This device must accept any interference received, including interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

IC STATEMENT

This device contains license-exempt transmitter(s)receiver(s) that comply with Innovation Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.

Email: [email protected]
Made in China

UNITED STATES
Tel 001 571 3705977
UNITED KINGDOM
Tel: 0061 384004871| CANADA
Tel: 001 613 4168166
AUSTRALIA
Tel: 0044 2080 895 663
---|---

SERVICE  LANGUAGE ENGLISH   Rev_1.0

Manufacturer: GUANGZHOU RANTION TECHNOLOGY CO., LTD. Address: Room 7002 and 7003, 7th Floor, Digital Entertainment Industrial Park, Greater Bay Area, No. 28 Huangpu Park West Road, Huangpu District, Guangzhou, China.

Information for UK representatives
OST_UK_20230608000003
Name: GOAL REACH CONSULTING LTD
Address: Office 1029 3 Hardman Street 10th
Floor,Spinningfields Manchester, UK M3 3hf
E-mail: [email protected]
Information for EU representatives
OST_EU_20230619000005
Name: SUCCESS COURIER SL
Address: Calle Rio Tomes Num.1,planta 1,Derecha,
Officine 3,Fuenlabrada,madrid,28947 Spain
E-mail: [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>