belkin WSC010 Stage Smart Scene Controller User Guide

WSC010 Stage Smart Scene Controller
User Guide

What’s in the box

What you’ll need

To control Wemo Stage, you’ll need an iPhone or iPad and a HomePod, Apple TV, or iPad set up as a home hub. Make sure your devices have the latest software and operating system updates.

• How to set up a home hub: support.apple.com/en-us/HT207057
• HomeKit-compatible devices: apple.com/ios/home/accessories

Quick setup

Use the Apple Home app to:

Add Wemo Stage as an accessory| Create scenes that control your smart devices| Assign scenes to buttons on Wemo Stage

1. Adding to Apple Home

1. Install battery into the controller with the positive side facing up
2. Wait for the controller to enter setup mode (light blinks yellow and green)
3. Launch the Apple Home app
4. Hold your phone near the controller and follow the prompts when they appear
   For iPhone X or below, you’ll need to add (+) Wemo Stage as an accessory in the Home app.

2. Creating scenes
Scenes allow you to automatically control single or multiple smart devices with the touch of a button.
Creating scenes in the Home app

1. Add a scene (+) from the Home app
2. Choose a scene name or create a custom name
3. Add accessories (smart devices) to the scene
4. Assign actions to these accessories (example: turn on/off a light)

3. Assigning scenes
Your Wemo Stage can trigger up to 6 scenes. Each button can be assigned a scene for a short press or long press.
Assigning scenes to buttons in the Home app

1. Tap your Wemo Stage from the list of accessories
2. Decide which button you want to assign the scene to, then choose short press or long press
3. Assign your scenes

Example scenes

| Bedtime: Place Wemo Stage on your bedside table. Before sleeping, press to turn off all your home lights and turn on your security system.
---|---
| Entertainment: Place Wemo Stage on your coffee table. When ready to party, press to dim the lights and turn on the music or TV.
| Guest room on/off: Give guests control of smart lights, fans, blinds, and other devices in their room.

Status light

| Off
Working normally; press any button to show status
---|---
| Green
A scene has been triggered or setup has just completed
| Yellow
Low-battery level
| Blinking Yellow
An error has occurred
| Yellow and Green (Alternating)
Ready for setup

Installing or changing battery

Remove the cover on the back of the controller| Install CR2032 battery in the compartment positive (+) side up| Replace back cover

Troubleshooting

Restart
Having setup or control issues? Remove and re-insert the battery to restart.
Factory restore
If a restart doesn’t help, factory restore your controller.

1. Press and hold Restore button for 5 seconds
2. Wait for the light to blink yellow, then green and release
3. Re-add your Wemo Stage to Apple Home and reassign scenes to buttons

Wall-mounting

Thoroughly clean wall surface. Remove the paper from the adhesive strips on the back of the cradle.| Attach the cradle to the wall
Snap the faceplate onto the mounted cradle| A magnet in the controller holds it to the wall mount

Have questions?

HomeKit Setup Code

Keep this HomeKit Code handy in case you need it for setup later

Wemo Stage Support

Visit wemo.com/stage for support with your Wemo Stage or call us at 1-844-745-WEMO.
For warranty information, go to wemo.com/warranty

Die Line File: IDL_WSC010_QSG
Artwork File: QSG_WSC010_8820-03033_RevA00_Stage_Scene_Controller
Business Unit: Belkin
Program Manager:
Packaging Engineer: Caleb Nelson
Retail Outside Dimension (Including Hang Tab)
L x W x D (in):
L x W x D (mm):
DIE/MATERIAL SPECS:
Material: Please refer to drawing
Blank Size (in): 316.01 x 308.70
Blank Size (mm): 316.01 x 308.70
This dieline works for following skus (if any): WSC010
Unit: IN/MM
Side Shown: PRINT SIDE
Flute/Grain: horizontal
Tolerance:+/- 1/32″ – 0.8mm
Drawing Scale 1:1
RELEASE DATE: 12/15/2020
DIELINE: Caleb Nelson
THIS DOCUMENT & THE INFORMATION IN IT ARE THE CONFIDENTIAL PROPERTY OF BELKIN INTERNATIONAL AND MUST NOT BE COPIED, REPRODUCED OR USED IN ANY MANNER WITHOUT THE WRITTEN CONSENT OF BELKIN CORPORATION. IT MUST BE RETURNED UPON REQUEST
DO NOT PRINT DIE LINES, PRINTERS NOTES

Documents / Resources

| belkin WSC010 Stage Smart Scene Controller [pdf] User Guide
WSC010, K7S-WSC010, K7SWSC010, WSC010 Stage Smart Scene Controller, Stage Smart Scene Controller, Smart Scene Controller, Scene Controller, Controller
---|---

References

• Home app - Accessories - Apple
• Set up your HomePod, HomePod mini, Apple TV, or iPad as a home hub - Apple Support
• Wemo Stage Scene Controller with Thread | Belkin | Belkin: US
• Warranty Center | Belkin: US

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>