legrand 5 742 43 Connected Lighting Micromodule Instruction Manual

: June 15, 2024
: Legrand

Table of Contents

Connected lighting micromodule
Pack contents
Characteristics
Before you start: wiring precautions
Install the connected lighting micromodule
Safety instructions
SIMPLIFIED EU DECLARATION OF CONFORMITY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

legrand 5 742 43 Connected Lighting Micromodule Instruction Manual

Connected lighting micromodule

This product is a connected accessory which requires you to buy and install the Arturo with Metaatom connected starter pack first.

Pack contents

Connected lighting micromodule

Characteristics

| R| L
---|---|---
م°45 +م°5 ****
50/60 Hz| 1 x 1.5 mm2
| | **ﻣﺻﺑﺎح LED
*| | |
| | | |
240 V~| Max.| 300 W| ()100 W| 250 W| 250 VA| 250 VA
100 V~| Max.| 150 W| (*)50 W| 125 W| 125 VA| 125 VA

Or 10 lamps max. For comfortable lighting, we recommend using bulbs of the same type and brand.
The ferromagnetic transformers must be charged to more than 60% of their power. When calculating the permissible power, the ferromagnetic transformer efficiency must be taken into account.

Before you start: wiring precautions

To install or replace a latching relay, only use the product:

Connected lighting micromodule You can keep the existing push buttons or replace them with wireless controls

Do not use : a connected switch (with dimmer option) to control a connected lighting micromodule

To control your micromodule:
The micromodule can be controlled from the Home+ control app, but we recommend combining it with at least one additional wireless lighting control and/or a mechanical push button.

To create your wireless lighting two-way switch:
Add one or several wireless lighting controls from the “… with Metaatom” connected ranges.

Install the connected lighting micromodule

The Arturo with Metaatom connected lighting micromodule can be easily installed in a ceiling light or in wall lights.

Switch OFF the power at the main circuit breaker
Wire the connected lighting micromodule

Option: remote control wiring using a non-illuminated mechanical pushbutton.

Make sure that the power is off before continuing with the installation.

Frequency bands : 2.4 – 2.4835 GHz
Power level: < 100 mW

N (neutral) = blue
L (live) = any except blue and green/yellow
(earth) = green/yellow

To add a connected product to your connected installation, you should follow the instructions:

in the Legrand Home + Control application (Settings/Add a new product section)
or consult the user manual on legrand.fr

www.legrand.fr/reference/574243

LEGRAND – Pro and Consumer Service – BP 30076 87002 LIMOGES CEDEX FRANCE • www.legrand.com

Safety instructions

This product should be installed in compliance with installation rules, preferably by a qualified electrician. Incorrect installation and/or incorrect use can lead to risk of electric shock or fire. Before carrying out the installation, read the instructions and take account of the product’s specific mounting location.

Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions. All Legrand products must be opened and repaired exclusively by personnel trained and approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities and the rights to replacement and guarantees. Use only Legrand brand accessories.

SIMPLIFIED EU DECLARATION OF CONFORMITY

The undersigned,

Legrand
declares that the radio-electric equipment referred to in these instructions complies with directive 2014/53/EU. The full text of the EU declaration of conformity is available on the following website:
www.legrandoc.com