belkin WIZ020 BoostCharge Pro 2 in 1 Wireless Charging Dock User Manual
- June 1, 2024
- belkin
Table of Contents
belkin WIZ020 BoostCharge Pro 2-in-1 Wireless Charging Dock
Specifications
- Brand: Belkin
- Model: BoostCharge Pro 2-in-1 Wireless Charging Dock with MagSafe
- SKU/Model: WIZ020
Product Usage Instructions
Safety Instructions
- WARNING: Failure to follow instructions may result in fire, electric shock, injury, or damage.
- Keep the wireless charger and power supply away from liquids or moisture.
- Unplug the wireless charger when not in use for extended periods.
- Avoid extreme temperatures when using the charger.
- Use only recommended power supplies to prevent risks.
Wireless Charging Guidelines
- Wireless charging power transmission rate is influenced by factors like proprietary charging protocols, ambient temperature, battery percentage, and device age.
- If experiencing issues, discontinue use, unplug the power supply, and contact Belkin for assistance.
FCC
FCC Compliance
This product complies with FCC rules for electromagnetic compatibility.
Operation is subject to conditions that it does not cause harmful interference
and must accept any received interference.
Radiation Exposure Statement
Ensure a minimum distance of 20 cm between the radiator and the body during
installation and operation to comply with radiation exposure limits.
Regulatory Statements
This digital apparatus complies with relevant regulations set forth by
Innovation, Science, and Economic Development Canada.
CHARGING
PRE-CAUTION
Safety Instructions
WARNING : Failure to follow these instructions could result In a fire, electric shock, injury, or damage to the user, product, or other property.
- Connect the power supply of the wireless charger to a power outlet that is close by and is easy to disconnect from.
- Use indoors and in a dry location only; Avoid charging near sources of heat or humidity.
- Keep the wireless charger and power supply away from any liquids or moisture.
- Unplug the wireless charger when not In use for long periods.
- Do not store your device in very hot or very cold locations. It Is recommended to use your device at room temperature.
- Do not use if visible defects are observed on the wireless charger or power supply.
- Do not attempt to service, modify, or disassemble the wireless charger or power supply.
- Use of a power supply not recommended or sold by Belkin may result In an Increased risk of fire, electric shock, injury, or damage to the user, product, or other property.
- The wireless charging power transmission rate Is regulated by the wireless charging device receiving power which can be
Influenced by factors like, but not limited to, proprietary charging protocols, ambient temperature, current battery percentage level, and age of the device being charged
CAUTION: If you experience problems with the wireless charger, please
discontinue use, unplug the power supply from the socket, and contact Belkin
for assistance.
The marking information Is located at the bottom of the apparatus
FCC Statement
DECLARATION OF CONFORMITY WlifHI FCC RULES FOR ELECTROMAGNETIC
COMPATIBILITY
We” Belkh11 International, Inc., at 555 S. Aviation Blvd., Suite 180, El
Segundo, CA 90245, USA, Te1: +1(310)1 751 5100, declare under our sole the
responsibility that this product complies with Part 15 of the FCC Rules.
Operation l1s subject:e:l to the following two conditions:
- this device may not cause 11armf ul Interference.
- this device must accept any interference, received, Including Interference that may cause undesired operation.
Federal Communications Commission Interference Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy, and if not installed and used by the instructions may
cause harmful interference to radio communications. However, there Is no
guarantee that interference will not occur In a particular Installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the ecaulprnent on and on, the
user Is encouraged to try and correct the interference by one or more ol the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to, which the receiver is connected.
- Consult the dealer, or an experienced radio/TV technician for help
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20 cm between the radiator and your body.
Innovation, Science, and Economic Development Canada Statement (ISED):
This device contains license-exempt transmitters)/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator and your body. Innovation,
Science, and Economic
Development Canada Statement:
This digital apparatus complies with CAN ICES-003(B) / NMB-003(B).
- SKU/Model : wrzo20
FAQ
- Q: What should I do if the wireless charger malfunctions?
- A: If you experience issues, discontinue use, unplug the power supply, and contact Belkin for assistance.
- Q: Can I use any power supply with the charging dock?
- A: It is recommended to use only power supplies approved or sold by Belkin to avoid risks of fire, electric shock, or damage.