BRiGADE BL-240D-256-SD Export Tool User Guide
- October 30, 2023
- BRiGADE
Table of Contents
BL-240D-256-SD
Export Tool User Guide
BL-240D-256-SD Export Tool
Please refer to www.brigade-electronics.com/brigadevan for more information and technical documents
Introduction
Attention – Customers should speak to their IT department as Admin rights are
required to install and use the Export Tool.
This software only supports Windows 10.
Download the latest Export Tool s/w here , download the full folder to run the
applications) This is a tool for exporting large recordings and log files when
you insert the SD card of BL-240D-256-SD to the PC directly.
Remove the SD card from the BL-240-256-SD and insert into your Windows PC.
To download the Export tool. Click this FILE MANAGER.exe
Click Change Dir to select the removable Disk (SD card).
Search by Time and export the file
Click [Search By Time]. The recording files will show in the directory tree by
recording date.
Double click on the date to see the files recorded on the selected day.
File name format:
T164515000000.ASF 16:45:15~16:46:09
T: Time Recording
164515: Start time of recording file
000000: channel 1 000100: channel2 000200: channel3 000300: channel4
16:45:15~16:46:09: start time and end time of this recording file
Export the file
Create a folder (On the C: Drive) for the videos on the PC, right click and
new folder in File Explorer.
Attention: If a new folder is not created in the C: Drive, the videos
will be saved on the SD Card automatically.
Select the exported files’ save path, where the folder was created.
Select the files required to export, click the Export button.
The INFORMATION Box will show the progress of exporting.
TIPS – Export all files [Not recommended]: The whole day can be extracted, customers can also select all the dates, to export all the files at one time. The file size of the export will be very large and it will take a long time so this is not recommended.
Search by Order and export files
This is used for debug in general. The tool will show all the recording files by time when the file is written on the disk. If there is an error with date and time on the SD MDR and the files cannot be shown click SEARCH BY TIME, to show all results.
Double click on the blocks, this will show the recording files. Then select
the files and export.
Select the files on different blocks to export them in one time after extract.
Then export the files you require.
Export Disk Log
Disk Logs may need checking for support purposes if there is an error with the
recorded file.
Select the disk first, then Click the Detail info. It will export the Log.
Go to the folder on the SD card to find the TXT file (see image above) in the root directory, copy, and send it to support.
Format the Disk
Attention – This will erase all recorded video files on the SD card.
Double click on PartitionTest.exe to open the application.
This will format the normal partition area (FAT32, which saves log & picture),
Record partition area (invisible video area), or totally format the disk
(click on delete all partition at the top for this) to the original factory
FAT32 mode.
Select the Disk, which contains FAT32 and EXT2 (Video area)
Format the disk (click on format normal partition) to the original factory FAT32 mode. It will format the disk to partition num 1.
technical@brigade-electronics.com
www.brigade-electronics.com
Documents / Resources
|
BRiGADE BL-240D-256-SD Export
Tool
[pdf] User Guide
BL-240D-256-SD, BL-240D-256-SD Export Tool, Export Tool
---|---
References
- electronics.com
- Brigade Electronics | Commercial Vehicle Camera Systems
- Brigade Electronics | Commercial Vehicle Camera Systems
- Product Support - Brigade Electronics - Downloads
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>