belkin WIC004 Magnetic Wireless Car Charger 10 Instructions
- June 3, 2024
- belkin
Table of Contents
Belkin WIC004 Magnetic Wireless Car Charger 10
Setting up the Belkin WIC004
The Belkin BOOST↑CHARGE™ Magnetic Wireless Car Charger 10W, WIC004 allows you
to mount your iPhone® 13 and iPhone 12 series devices on the car vent mount
and quickly charge your devices in the car with up to 10W of power. This
article will help you set up the Belkin WIC004.
-
Step 1:
Twist the cap clockwise to open.
-
Step 2:
Insert the clip unto the cap.
-
Step 3:
Twist the cap counterclockwise to lock the clip. -
Step 4:
Connect the provided USB-C® cable into the Belkin WIC004 and plug the other end into the USB-C PD car power supply.
NOTE: The Belkin WIC004btBK model has an included USB-C PD car power supply unit while Belkin WIC004btBK-NC does not. -
Step 5:
Place the back of your phone onto the flat surface of the mount. The magnets on the Belkin WIC004 will align your phone perfectly and securely on the mount.
QUICK TIP: You can set your phone on the mount in either portrait or landscape mode. -
Step 6:
Securely clip the Belkin WIC004 into your car vent.
-
NOTE: Do NOT clip the device on the car vent when your heater is ON.
-
Step 7:
Adjust the view angle of your phone. -
https://www.belkin.com/us/support-article?articleNum=318772
References
- Mobile & Computer Accessory Products | Belkin US
- Belkin Official Support - Setting up the Belkin WIC004