PreSonus Studio One CC121 Native Support User Guide

PreSonus Studio One CC121 Native Support

Overview

Introduction

Studio One offers native support for CC121. This document is an overview of all remotecontrol functions supported, as well as step-by-step instructions for the hardware setup.

Setup

Install the CC121 drivers for macOS or Windows and connect the device to the computer. Studio One will then add the CC121 automatically to the external devices list.

Control Assignments

Transport Section

The transport section controls are mapped as follows:

• Record: Start recording

• Play : Start playback

• Stop: Stop playback (press 2x: return Time Cursor to playback start, press 3x:
  return Time Cursor to zero)

• Loop: Enable / disable Loop

• Previous: Return Time Cursor to previous marker

• Next: Advance Time Cursor to next marker

• Rewind: Engage rewind

• Fast Forward: Engage fast forward

Channel Section

The channel section controls are mapped as follows:

• Fader: Control channe Volume
• Pan Encoder: Control channel Pan
• Mute: Mute channel l Solo: Solo channel
• Read: Set automation mode to Read
• Write: Set automation mode to Write
• Monitor: Monitor channel
• Arm: Arm track for recording
• Edit: Open channel FX editor
• Instrument: Open instrument edito
• Previous: Select previous channel
• Next: Select next channel

All controls work on the currently selected channel. To navigate channels, use the Previous and Next channel select buttons.

Function and AI Knob Section

The function and AI Knob section controls are mapped as follows:

• F1..F4: Trigger Studio One command (assign via Control Link)
• Value: Zoom horizontally, zoom vertically, zoom data or browse presets (change modes: see below)
• AI Knob: Control most recently used Studio One or plug-in parameter
• Lock: Fixate recent parameter currently controlled by AI Knob
• Jog: Set AI Knob to control Time Cursor

To change the operating mode of the Value encoder, push it down and press one of the function buttons:

• F1: Zoom horizontally
• F2: Zoom vertically
• F3: Zoom data
• F4: Browse presets

To assign user commands to the function buttons F1, F2, F3 and F4 , open the CC121 external device editor in for the respective button SatnuddisoeOlencet AvsiasitghnefEro QmTthy epecobnuttetoxnt ,mriegnhut-.click

EQ Section

The EQ section controls are mapped as follows:

• ON 1..4: Control plug-in or Studio One parameter (assign via Control Link)
• Encoder 1..12: Control plug-in or Studio One parameter (assign via Control Link)
• EQ Type: Open CC121 external device editor in Studio One
• Value: Browse Control Link pages (press down + turn)
• Bypass All: Bypass insert effects for selected channel

The encoders and On buttons are freely assignable via Control Link to define custom plug-in and Studio One parameter mappings. Assignments can be made in the CC121 external device editor. To open the CC121 external device editor, press the EQ Type button.

To assign a parameter, first interact with it in either a plug-in or Studio One. Now, rightAcslhlitcoekurntldhaetbiveceoalnyst,sruoigslnUeeItdheetleoSm. tIunednthitoeinOctnohenetaCeuxCtto-1m2me1anepuxp,tiesnergnleafecl tadAteusvrsiecigebnyetdeointpoaerbrtlofinowgrmhAituchhteotFhaiesllsipnigatnrhamemeentte. r CC121 external device editor.

Control Link user mapping and AutoFill modes can span multiple mapping pages. To browse pages, turn the Value encoder while pressing it down.

For more details on parameter assignments and Control Link in general, please refer to
the Studio One reference manual Control Link section.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>