ResMed AirSense 10 AutoSet for Her User Guide

ResMed AirSense 10 AutoSet for Her

Product Information

Specifications

• Home button: for returning to the Home screen at any time
• Start/Stop button: for starting therapy
• Dial: for navigating and changing options
• Air outlet: for connecting the air tubing

Product Usage Instructions

Setup

1. Place the device on a stable-level surface.
2. Plug the power connector into the rear of the device. Connect one end of the power cord to the power supply unit and the other end to the power outlet.
3. Connect the air tubing firmly to the air outlet located on the rear of the device.
4. Connect the free end of the air tubing firmly onto the assembled mask.
5. Press Start/Stop to begin therapy.

AirSense 10 with HumidAir
If you have an AirSense 10 device with HumidAirTM, follow these steps:

1. Open the humidifier and fill it with water up to the maximum water level mark.
2. Close the humidifier and insert it into the side of the device.

Note : Heated humidification offers relief from dryness and congestion and is designed to make therapy more comfortable. If you do not have an AirSense 10 device with HumidAir, consider purchasing HumidAir and ClimateLineAirTM heated air tubing.

Adjusting to therapy
If you are a first-time user, it may take some time to get used to therapy. It is not unusual as it takes most patients between one and two weeks to adjust to the air pressure.

Overcoming symptoms by changing comfort settings:
If you are having difficulties getting used to therapy, use the AirSense 10 comfort features to help you on your journey to better sleep.

To change the Ramp Time

1. Press the dial to enter My Options.
2. Turn the dial to highlight Ramp Time and then press to select it.
3. Turn the dial to adjust to your preferred setting.
4. Press the dial to save the change. If you have an AirSense 10 device with HumidAir, you have more comfort features available which help make your therapy more comfortable.

Cleaning

1. Wash the air tubing in warm water using mild detergent. Do not wash in a dishwasher or washing machine.
2. Rinse the air tubing thoroughly and allow it to dry out of direct sunlight and/or heat.
3. Wipe the exterior of the device with a dry cloth.

If you have an AirSense 10 device with HumidAir, clean the humidifier as per steps 1 and 2. Refer to your mask User Guide for detailed instructions on cleaning your mask.

Checking and Replacing Your Parts Regularly

It is important for your comfort and health that you check and replace your parts and supplies regularly. Replacing your parts and supplies on a regular basis helps ensure you are receiving optimal therapy and continued comfort. Refer to your AirSense 10 User Guide for detailed instructions on checking your device. Contact your care provider for information on your replacement schedule.

OVERVIEW

Read your entire AirSense™ 10 User Guide before use.

Setup

1. Place the device on a stable-level surface.
2. Plug the power connector into the rear of the device. Connect one end of the power cord to the power supply unit and the other end to the power outlet.
3. Connect the air tubing firmly to the air outlet located on the rear of the device.
4. Connect the free end of the air tubing firmly onto the assembled mask. Press Start/Stop to begin therapy.

AirSense 10 with HumidAir

If you have an AirSense 10 device with HumidAir™, fill the humidifier as follows:

1. Open the humidifier and fill it with water up to the maximum water level mark.
2. Close the humidifier and insert it into the side of the device.

Heated humidification offers relief from dryness and congestion and is designed to make therapy more comfortable. If you do not have an AirSense 10 device with HumidAir, consider purchasing HumidAir and ClimateLineAir™ heated air tubing.

Adjusting to therapy

If you are a first-time user, you might need some time to get used to therapy. This is not unusual as it takes most patients between one and two weeks to adjust to the air pressure. Overcoming symptoms by changing comfort settings
If you are having difficulties getting used to therapy, use the AirSense 10 comfort features to help you on your journey to better sleep.

• Trouble falling asleep
  • If you are having trouble falling asleep with high pressure, turn on Auto Ramp or increase Ramp Time.
• Bloated feeling
  • If you are experiencing a slightly bloated feeling from swallowing air, turn on Auto Ramp or increase Ramp Time.
• The feeling of not getting enough air
  • If you feel like you are not getting enough air, turn Ramp Time to Off.

To change the Ramp Time:

1. Press the dial to enter My Options.
2. Turn the dial to highlight Ramp Time and then press to select it
3. Turn the dial to adjust to your preferred setting.
4. Press the dial to save the change.

If you have an AirSense 10 device with HumidAir, you have more comfort features available which help make your therapy more comfortable.

• Dry or runny nose
  • If you are getting a dry or runny nose, adjust the Humidity Level by turning it up.
• Droplets of water (condensation)
  • If you are getting droplets of water on your nose, mask, or air tubing, adjust the Humidity Level by turning it down.

Cleaning

1. Wash the air tubing in warm water using mild detergent. Do not wash in a dishwasher or washing machine.
2. Rinse the air tubing thoroughly and allow it to dry out of direct sunlight and/or heat.
3. Wipe the exterior of the device with a dry cloth.

If you have an AirSense 10 device with HumidAir, clean the humidifier as per steps 1 and 2. Refer to your mask User Guide for detailed instructions on cleaning your mask.

Checking and replacing your parts regularly
It is important for your comfort and health that you check and replace your parts and supplies regularly. Replacing your parts and supplies on a regular basis helps ensure you are receiving optimal therapy and continued comfort. Refer to your AirSense 10 User Guide for detailed instructions on checking your device. Contact your care provider for information on your replacement schedule.

ResMed Pty Ltd 1 Elizabeth Macarthur Drive Bella Vista NSW 2153 Australia See ResMed.com for other ResMed locations worldwide. AirSense, ClimateLine, and HumidAir are trademarks and/or registered trademarks of the ResMed family of companies. For patent and other intellectual property information, see ResMed.com/ip. © 2019 ResMed Pty Ltd. 378898/1 2019-09 ResMed.com  https://manual-hub.com/

FAQ

Q: How long does it take to adjust to the air pressure during therapy?

A: Most patients take between one and two weeks to adjust to the air pressure.

Q: Can I change the comfort settings to make therapy more comfortable?

A: Yes, you can change the Ramp Time and other comfort features available on the AirSense 10 device to make your therapy more comfortable. Refer to the user manual for detailed instructions.

Q: How should I clean the device and air tubing?

A: Wash the air tubing in warm water using mild detergent. Do not wash in a dishwasher or washing machine. Wipe the exterior of the device with a dry cloth. Refer to the user manual for detailed cleaning instructions.

References

• Manual-Hub.com - Free PDF manuals!
• Sleep apnea and COPD - learn about symptoms and treatment | ResMed
• Legal disclaimers and intellectual property - ResMed
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>