BOSE AMM108 AMM Suspension Bracket Installation Guide
- June 1, 2024
- Bose
Table of Contents
BOSE AMM108 AMM Suspension Bracket
Package Contents
-
M10 (×2)
-
M10 (×2)
-
M10 (×2)
Dimensions & Weight
Boseprofessional.com/AMMsbracket
Installation Instructions
This guide includes instructions for installing the Bose Professional AMM Suspension Bracket for use with the Bose Professional AMM108/AMM112 loudspeakers. To ensure safe product installation, it is the installer’s responsibility to refer to all relevant documentation for this product and all other installation components before installing the product.
Before installing the AMM Suspension Bracket, please read this installation guide and the AMM108/AMM112 product guide. To access additional documentation, scan the QR code on this page or visit BoseProfessional.com/AMMSbracket.
If you are using additional components or hardware in your installation, please review all relevant documentation for those products.
Note: Choose appropriate fasteners to support the weight of the loudspeaker with your suspension system (see the AMM108/AMM112 product guide for the product weight). Choose fasteners that are consistent with all local building codes and requirements.
The AMM Suspension Bracket is not designed for permanent outdoor use.
- Attach the bracket to two M10 threaded attachment points on the loudspeaker using the included M10 screws and washers (see the AMM108/AMM112 product guide for the usable attachment points).
- Attach load-rated 19 mm (5/8-inch) lifting shackles to the desired hole of the suspension bracket. (The first labeled row of angles is for use with the AMM108 loudspeaker. The second labeled row of angles is for use with the AMM112 loudspeaker.)
WARNINGS/CAUTIONS
Please read and keep all safety and use instructions.
Contains small parts which may be a choking hazard. Not suitable for children under age 3.
- This product is intended for installation by professional installers only! This document is intended to provide professional installers with basic installation and safety guidelines for this product. Please read this document and all safety warnings before attempting installation.
- Installed loudspeakers require regular inspection and routine maintenance to ensure proper function and safe operation. Inspect mounting hardware and attachments for signs of corrosion, bending or any other condition that may decrease the structural integrity. Immediately replace worn or damaged components.
- Unsafe mounting or overhead suspension of any heavy load can result in serious injury or death, and property damage. It is the installer’s responsibility to evaluate the reliability of any mounting method used for their application. Only professional installers with the knowledge of proper hardware and safe mounting techniques should attempt to install any loudspeaker overhead.
- All Bose Professional products must be installed in accordance with local, state, federal and industry regulations. It is the installer’s responsibility to ensure installation of the loudspeakers and mounting system is performed in accordance with all applicable codes, including local building codes and regulations. Consult the local authority having jurisdiction before installing this product.
- Use only the hardware and accessories included or specified by Bose Professional. Hardware for securing the loudspeaker to the mounting surface is not supplied. For information on compatible accessories, see the product’s technical data sheet at BoseProfessional.com.
- Do not mount on surfaces that are not sturdy, or that have hazards concealed behind them, such as electrical wiring or plumbing.
- Do not make unauthorized alterations to this product.
- Do not expose loudspeaker or mounting components to any chemical substances that are not specified by Bose Professional, including but not limited to lubricants, cleaning agents, contact sprays, or other hydrocarbon-based solvents. Exposure to such substances can lead to degradation of the plastic material, resulting in cracking and creating a falling hazard.
- Do not place or install the bracket or product near any heat sources, such as fireplaces, radiators, heat registers or other apparatus (including amplifiers) that produce heat.
Customer Support
Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture; “3” is 2013 or 2023.
China Importer: Bose Electronics (Shanghai) Company Limited, Level 6, Tower D, No. 2337 Gudai Rd. Minhang District, Shanghai 201100
UK Importer: Bose Limited Bose House, Quayside Chatham Maritime, Chatham, Kent, ME4 4QZ, United Kingdom
EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, The Netherlands
Mexico Importer: Bose de México, S. de R.L. de C.V. , Paseo de las Palmas 405-204, Lomas de Chapultepec, 11000 México, D.F. For service or importer information, call +5255 (5202) 3545.
Taiwan Importer: Bose Taiwan Branch, 9F-A1, No. 10, Section 3, Minsheng East Road, Taipei City 104, Taiwan. Phone Number: +886-2-2514 7676
Bose Corporation , Framingham, MA 01701, U.S.A. 1-877-230-5639 Bose is a trademark of Bose Corporation. ©2023 Transom Post OpCo LLC. No part of this work may be reproduced, modified, distributed or otherwise used without prior written permission.
Warranty Information
This product is covered by a limited warranty. For warranty details, visit
BoseProfessional.com/Warranty.
©2023 Transom Post OpCo LLC. All rights reserved.
Framingham, MA 01701 USA
BoseProfessional.com
AM858226 Rev. 02
May 2023
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>