AUDIO SYSTEM ALU-EGG HS30 PHASE BL Aluminium Egg for HS30 Phase Tweeter 1 Pair User Manual
- June 12, 2024
- AUDIO SYSTEM
Table of Contents
AUDIO SYSTEM ALU-EGG HS30 PHASE BL Aluminium Egg for HS30 Phase Tweeter 1
Pair
Product Information
The product is called ALU-EGG HS30 PHASE BL.
It includes the following components:
- 4x TUBE M10x20
- 2x GELENK / SWIVEL
- 2x TUBE M10x40
- 2x ALU-EGG HS30
- PHASE BL
- 2x NUT M10
The user manual provides installation tips and instructions for two different installation variants, A and B. It also mentions the importance of speaker polarity for optimal sound quality. The manual suggests changing the polarity of the tweeter to find the best sound. Additionally, the manual mentions the use of optional mounting accessories such as ALUBUTYL damping material, Doorkit 1.0 and 2.0 for damping, Rain Protection MBR165, and Z-(T)SC Oxygen- Free Speaker Cable. For more information, you can visit the website www.audio- system.de.
Product Usage Instructions
Installation Variant A (variable):
- Ensure that the polarity of all speakers is correct for optimal sound quality.
- Change the polarity of the tweeter to find the best sound. It is recommended to listen and/or measure it.
- Install the ALU-EGG HS30 PHASE BL according to your preferred configuration.
Installation Variant B (fixed):
- Ensure that the polarity of all speakers is correct for optimal sound quality.
- Install the ALU-EGG HS30 PHASE BL according to your preferred configuration.
Optional Mounting Accessories
If desired, you can use the following optional mounting accessories:
- ALUBUTYL 1500, 2000 EVO, 3000 EVO, 4000 EVO, or ALU 250 EVO (Self Adhesive Damping Material) for improved sound insulation.
- Doorkit 1.0 or Doorkit 2.0 for additional damping.
- Rain Protection MBR165 for protection against moisture.
- Z-(T)SC 0.75, 1.5, 2.5, or 4.0 Oxygen Free Speaker Cable for high-quality audio signal transmission.
- Please refer to the user manual for more detailed instructions on installing the optional accessories. For further information and support, you can visit the website www.audio-system.de.
Thank You
Congratulations on purchasing a high-quality AUDIO SYSTEM product incl. GERMAN
SOUND.
-
Important : Completely read this operating instruction before installation and use of the device.
-
Attention : Pay attention to advice and instructions of the car manufacturer.
Check the polarity when connecting the speakers. -
Important : You will need your purchase receipt as proof of purchase for all warranty repairs and for insurance purposes.
Keep your receipt, owner´s manual and packing materials in a safe location for possible future use. -
Attention : Use of sound components can impair your ability to hear necessary traffic sounds and may constitute a hazard while driving your automobile.
AUDIO SYSTEM GERMANY accepts no liability for hearing loss, bodily injury, or property damage because of use or misuse of our products.
We recommend installing the equipment by an authorized service center or dealer. A professional fitting and connection are the requirement for further warranty and perfect sound.
Mechanical Installation Tip
Warning : First disconnect negative pole of your car battery. Check-
polarity, changing polarity may cause serious damage to your car electric.
Best speaker positions are the original build in positions. Easy installation
and original look are the reasons. Please note that the speakers are installed
flat and stable. The quality of the installation decides the sound very much;
therefore, attention should be paid to insulation and care during
installation. Please note that the speakers are protected from heat, sunlight,
mechanical influences, moisture, and wetness by accessories from AUDIO SYSTEM.
Attention : Install all cables as straight as possible without squashing
or laying them over sharp edges. Otherwise, this can cause short circuit or
damages to your whole installation.
Attention : Be careful removing original plastic parts of your car. The
fitting parts could be damaged and must be replaced
Important : The right polarity of all speakers is extremely important for
the sound of your car audio system. We recommend changing polarity of the
tweeter finding out the best possible sound. The best is to listen and/or to
measure it.
Install Variant
A (variable)
Important:
Please use screw-lock or similar on inner 20mm tube to fix the mounting swivel
direction.
Install Variant B (fixed)
Optional Mounting Accessories
- ALUBUTYL 1500, 2000 EVO , 3000 EVO , 4000 EVO und ALU 250 EVO (Self Adhesive Damping Material)
- Damping: Doorkit 1.0 and Doorkit 2.0
- Rain Protection MBR165
- Z-(T)SC 0.75, 1.5, 2.5, 4.0 Oxygen-Free Speaker Cable
www.audio-system.de
audio system germany
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>