BRAINLIT Saga Luminaire Pendant Installation Guide
- October 30, 2023
- BRAINLIT
Table of Contents
BRAINLIT Saga Luminaire Pendant
Product Information
The product is a luminaire that comes with a driver touch protection and a diffusor. It has WAGO connectors for power connection and LED cables for light source. The luminaire can be disassembled for maintenance or replacement of parts.
Product Usage Instructions
- Before disassembling, unplug the power connection to the luminaire by pulling apart the WAGO connectors.
- Take down the luminaire by following the DA DA -+ DA + D-A L L N N pattern.
- Using a screwdriver with a PH2 head, unscrew the screw(s) on the driver touch protection. Press down the cable securing button on the driver to unplug the LED cables.
- To remove the diffusor, slightly tilt it. Do not use force or any sharp objects.
- Unplug the light source(s) by pressing down the centre and pulling. Unscrew the screws holding the light source(s) with a suitable bit and a screwdriver.
- If replacing the light source, attach the new light source and remount the luminaire by following these instructions in reverse.
- Recycle all parts accordingly.
Disassembly instructions
-
STEP 1
Unplug the power connection to the luminaire by pulling apart the WAGO connectors. -
STEP 2
Take down the luminaire. -
STEP 3
Unscrew the screw(s) on the driver touch protection using a screwdriver with a PH2 head.
Unplug the LED cables by pressing down the cable securing button on the driver. -
STEP 3
Remove the diffusor from the luminaire by slightly tilting.
N.B. Don’t use force or any sharp objects. -
STEP 4
Unplug the light source(s). -
STEP 5
Unscrew the screws holding the light source(s) with a suitable bit and a screwdriver. -
STEP 6
Recycle all parts accordingly.
If replacing the light source; attach new light source and remount the luminaire by following this instruction in reverse.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>