Ampeak 2000W Safe Power Inverter Instruction Manual
- June 3, 2024
- Ampeak
Table of Contents
Ampeak 2000W Safe Power Inverter Instruction Manual
Overview
What is included?
Easy operation steps
Introduction
Thank you for choosing Ampeak 2000 Watts Safe Power Inverter. Please read
this instruction carefully as they contain important information, and safety requirements. If you have trouble understanding the instructions, or have any questions regarding its operation, please contact our friendly customer support team via customenservices@ampeak.com
Specification
| continous output | 2000 watts |
|---|---|
| surge output | 4000 watts |
| input voltage |
DC 11v~15v
low battery alarm|
10v +0.5
low battery shut| 9.5v+0.5v
high battery shut|
16v+0.5v
USB output current|
Dual301A
waveform| modified sine wave
fuse| 250A fuse
output voltage| AC 100v~120v
Attention
1. When the input voltage is lower than 9.5V or higher than 16V, the audible
alarm will appear as a long warning.
2. When the input voltage is at 10.5V, the product will have an audible alarm
intermittent low voltage warning reminder.
3. When the loaded equipment exceeds the power of the product itself, the
audible alarm will show a long warning; At this time, the customer needs to
adjust the power to work within the allowable power range, and after it lasts
twice, the third time will enter the protection state, and the 2000 watts
power inverter needs to be restarted before it can work normally.
| Screen Display | Protection Name | Audible Alarm |
|---|---|---|
| Battery Low Voltage Protection | Input Voltage: 9.SVñ 0.SV Inverter |
Stops WorkingScreen Display BATLOW VOLTAGE Continuous Alarm for 60 Seconds
DC Cigarette Lighter Low Voltage Protection| DC Output Vnltage:
9.SVñ 0.SV Inverter Stops WorkingScreen Display BATLOW VOLTAGE Continunus
Alarm for 60 Seconds
| Battery Over Voltage Protection| Input Voltage: 16Vñ 0.SV Inverter Stops
WorkingScreen Display BATOVER VOLTAGE Continunus Alarm for 60 Seconds
DC Cigarette Lighter Over VoltageProtection| DC Output Voltage: l6V + 0.fV
Inverter Stops WorkingScreen Display BATOVflR VOLTAGE Continuous Alarm for 60
Seconds
| Output Overload Protection| Output Wattage>2200W Inverter Stops Working
Screen Display OVERLOADContinuous Alarm for 60 Seconds Allow Two Restores,
Program locked Permanently in the Third Time.
| Output Over Current Protection| Output Electric Current>25 Amps
Inverter Stops WorkingScreen Display OVER CURRENT Continuous Alarm for 60
Seconds
**| Output Short Circuit Protection| Inverter Stops
WorkingScreen Display SHORT CIRCUIT Continuous Alarm for 60 Seconds
| Inverter Overheat Protection| Internal Rlectrnnic Components of
Inverter Temperature >105°C(221°F) Inverter Stops WorkingScreen Display
OVERHEATContinuous Alarm for 60 Seconds
| Inverter Overcool Protection**| Internal Electrnnic Components of
Inverter Temperatures-l0°C(l4°F) Inverter Stops WorkingScreen Display
OVERCOOLContinuous Alarm for 60 Seconds
|
Reverse Polarity Protection
| The POSitive and Negative Terminals
of th e Inverter or Battery are Reversed Inverter Stops Working, Screen Display REVERSE POLARITY No Alarm Remind
---|---|---
|
COmmUnlCñtlOR
Error Protection
| Communication Error Inverter Stops Working
Screen Display COMMWARN Intermittent Alarm for 30 Seconds
|
VCC Power Down Protection
| Inverter Power Down Inverter Stops Working
Screen Display VCCLOW VOLTAGE Intermittent Alarm for 30 Seconds
|
Inverter Low Voltage Protection
| Output Voltage 80V Inverter Stops Working
Screen Display INVLOW VOLTAGE Continuous Alarm for 60 Seconds
|
Inverter Over Voltage Protection
| Output Voltage 140V Inverter Stops Working
Screen Display INVOVER VOLTAGE Continuous Alarm for 60 Seconds
|
DC Cigarette Lighter Overload Protection
| DC Output Wattage>2lSW Inverter Stops Working
Screen Display DC OVERLOAD The Outlets Stop Working Continuous Alarm for 60 Seconds Allow Two Restores, Program locked Permanently in the Third Time.
| DC Cigarette Lighter Over Current
Protection
| DC Output Electric Current>18 Amps Inverter Stops Working
Screen Display DC OVER CURRENT Continuous Alarm for 60 Seconds
No Display
|
USB Short Circuit
Protection
|
No Alarm Remind
USB Ports Stop Working
No Display
|
Isolated Circuit
| Input Circuit and Output Circuit are Isolated
The Two Circuits are Insulated from Each Other to Ensure Circuit Safety
No Display
|
Battery Low Voltage Alarms
| Input Voltage. l0.SVN 0.SV Inverter Outputs Keep Working
Screen No Error Display Low Battery
Remind. Intermittent Alarm for 30 Seconds
LIMITED WARRANTY
18-MONTH LIMITED WARRANTY POLICY 18-Month Limited Warranty Policy is the only
one that applies to this unit, and it sets forth all the responsibilities of
Ampeak. There is no other warranty, other than those described herein. Any
implied warranty of merchant ability or fitness for a particular purpose on
this unit is limited in duration to the duration of this warranty. This unit
is warranted to the original purchaser only to be free of defects in materials
and workmanship for 18-month from the date of purchase without additional
charge. The warranty does not extend to subsequent purchasers or users.
Ampeak will not be responsible for any amount of damage in excess of the
retail purchase price of the unit under any circumstances. Incidental and
consequential damages are specifically excluded from coverage under this
warranty. This unit is not intended for commercial use. This warranty does not
apply to damage to units from misuse or incorrect installation/connection.
Misuse includes wiring or connecting to improper polarity power sources.
RETURN/REPAIR POLICY
If you are experiencing any problems with your unit, please contact Ampeak
Customer Service Department at: customenservices@ampeak.com returning the
product to Amazon. After speaking to a customer service representative, if
products are deemed non-working or malfunctioning, the product may be returned
to amazon within 30 days of original purchase. Any defective unit that is
returned to Amazon within 30 days of the date of purchase will be replaced
free of charge or fully refunded at the buyer’s option.
If such a unit is returned more than 30 days but less than 18-month from the
purchase date, the manufacturer will repair the unit or at its option, replace
it, free of charge. If the unit is repaired, new or reconditioned replacement
parts may be used, at the manufacturer’s option. A unit may be replaced with a
new or reconditioned unit of the same or comparable design. The repaired or
replaced unit will then be warranted under the terms of the remainder of the
warranty period.
LIMITATIONS
This warranty does not cover accessories, such as adapters and batteries, damage or defects resulting from normal wear and tear(including chips, scratches, abrasions, discoloration, or fading due to usage or exposure to sunlight), accidents, damage during shipping to our service facility, alterations, unauthorized use or repair, neglect, misuse, abuse, failure to follow instructions for care and maintenance, fire and flood.
IMPORTANT SAFETY INFORMATION
SAFETY STATEMENT
It is the responsibility of the owner to make sure all personnel read this
manual prior to using the device. It is also the responsibility of the device
owner to keep this manual intact and in a convenient location for all to see
and read. If the manual or product labels are lost or not legible, contact
Ampeak for replacements or an electronic edition. If the operator is not
fluent in English, the product and safety instructions shall be read and
discussed with the operator in the operator’s native language by the purchaser
owned or his designee, making sure that the operator comprehends its contents.
READ ALL WARNINGS AND FOLLOW ALL INSTRUCTIONS A BEFORE OPERATING THIS
PRODUCT!
WARNING: RISK OF SHOCK, FIRE, AND EXPLOSION.
The inverter produces the same potentially lethal AC power as normal household
outlets. It is suggested that you treat it as a normal AC outlet.
- DO NOT insert foreign objects into the AC outlet, the USB port, or the ventilation hole.
- DO NOT use this product where there are flammable fumes or gases, such as in the bilge of a gasoline-powered boat, or near propane tanks.
- NEVER smoke or allow a spark or flame in the vicinity of the engine or batteries.
- Make sure the inverter wiring is of proper size and rating and in good condition. Operating the inverter with damaged wiring may void warranty.
aCAUTION: PERSONAL SAFETY & EQUIPMENT DAMAGE. KEEP AWAY FROM CHILDREN, THIS IS NOT A TOY.
- DO NOT attempt to fix the unit by disassembling or modification. You can cause self-injury and disassemble and modifying the unit will void your warranty.
- Disconnect DC power source from the inverter, before attempting to service, clean, or operate on any circuits connected to the inverter. Simply turning OFF the switch of the inverter will not disconnect the power, thereby causing electric shock.
- Never connect the inverter to any power distribution systems or branch circuits.
- DO NOT make any electrical connections or disconnections in areas designated as ignition protected. This unit is NOT approved for ignition-protected areas.
- Connect the unit to a power source with a normal output of 12v DC ONLY. 6V battery voltages are too low and 24V battery voltages are too high, which will damage the unit.
- DO NOT use the inverter in temperatures above -10°C/14°F – 40°C/104°F.
- DO NOT expose this product to water, rain, snow, condensation, or spray.
- DO NOT connect the unit to live AC power circuits or there will be damage to the inverter.
- DO NOT connect any AC device which has its neutral conductor connected to the ground to the unit.
- DO NOT use the inverter with medical devices since it is not approved for medical applications.
- DO NOT permanently install the unit in the engine compartment. Certain chargers for small nickel-cadmium batteries can be damaged if connected to the inverter
- DO NOT use the inverter beyond its rated wattage capacity. Add the total watts of all connected appliances and be sure the total is less than the inverter’s capacity A This product may contain one or more chemicals known to the state of California to cause cancer and birth defects or other reproductive harm. Wash hands thoroughly after handling.
NOTE: If you are unsure about using your rechargeable appliance with the inverter, contact the Ampeak: customenservices@ampeak.com to determine the rechargeable appliances compatibility with the inverter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>