POWER DYNAMICS 952538WS Series In Outdoor Wi-Fi BT Speaker Set Instruction Manual
- June 22, 2024
- Power Dynamics
Table of Contents
POWER DYNAMICS 952538WS Series In Outdoor Wi-Fi BT Speaker Set
Specifications:
- Product Name: WS Series In-/Outdoor Wifi/BT Speaker Set
- Reference Numbers: 952.538; 952.539; 952.541; 952.542
- Version: V2.3
Product Information
Congratulations on purchasing the Power Dynamics WS Series In-/Outdoor Wifi/BT Speaker Set. This product offers a combination of indoor and outdoor functionality with Wi-Fi and Bluetooth capabilities.
Usage Instructions
Safety Precautions:
- Read the manual thoroughly before using the unit to understand all features.
- Do not open the housing or place metal objects/liquids inside the unit to avoid electrical shock and malfunction.
- Avoid placing the unit near heat sources, on vibrating surfaces, or covering ventilation holes.
- Use the unit in well-ventilated areas and do not connect it to a rheostat or dimmer.
Power Supply:
- Connect the unit to an earthed mains outlet (220-240Vac/50Hz) with a 10-16A fuse.
- Unplug the unit during thunderstorms or extended periods of non-use to prevent damage.
Battery Maintenance:
- If the unit has a built-in lead-acid rechargeable battery, recharge it every 3 months if not in use for an extended period to avoid permanent damage.
- Replace damaged batteries with the same type recommended by the manufacturer.
Speaker Placement:
Keep the unit at least 60cm away from computers or TVs to prevent
interference from the magnetic field generated by the speakers.
Frequently Asked Questions (FAQ):
-
Q: How often should I recharge the built-in battery?
A: Recharge the battery every 3 months if the product will not be used for an extended period to prevent permanent damage. -
Q: Can I open the housing of the unit for maintenance?
A: No, do not open the housing as it contains voltage-carrying parts. All repairs should be done by a qualified technician to avoid electrical shock. -
Q: What should I do if I notice a burning smell when I first switch on the unit?
A: It is normal for a new unit to emit a smell when first used.
The smell will dissipate after some time; however, if it persists, contact your dealer for assistance.
Congratulations to the purchase of this Power Dynamics product. Please read
this manual thoroughly prior to using the unit in order to benefit fully from
all features.
Read the manual prior to using the unit. Follow the instructions in order not
to invalidate the warranty. Take all precautions to avoid fire and/or
electrical shock. Repairs must only be carried out by a qualified technician
in order to avoid electrical shock. Keep the manual for future reference.
- Prior to using the unit, please ask advice from a specialist. When the unit is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
- The unit contains voltage carrying parts. Therefore, do NOT open the housing.
- Do not place metal objects or pour liquids into the unit This may cause electrical shock and malfunction.
- Do not place the unit near heat sources such as radiators, etc. Do not place the unit on a vibrating surface. Do not cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
- When unplugging the unit from a mains outlet, always pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
- If the unit is damaged to such an extent that internal parts are visible, do NOT plug the unit into a mains outlet and DO NOT switch the unit on. Contact your dealer. Do NOT connect the unit to a rheostat or dimmer.
- For use in humid rooms or outdoors: refer to the installation guidelines for safe assembly.
- All repairs should be carried out by a qualified technician only.
- Connect the unit to an earthed mains outlet (220-240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the unit will not be used for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on.
- To prevent accidents in companies, you must follow the applicable guide lines and follow the instructions.
- Do not repeatedly switch the fixture on and off. This shortens the life time.
- Keep the unit out of the reach of children. Do not leave the unit unattended.
- Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
- Do not force the controls.
- This unit is with speaker inside which can cause magnetic field. Keep this unit at least 60cm away from computer or TV.
- If this product has a built-in lead-acid rechargeable battery. Please recharge the battery every 3 months if you are not going to use the product for a long period of time. Otherwise the battery may be permanently damaged.
- If the battery is damaged please replace with same specifications battery. And dispose the damaged battery environment friendly.
- If the unit has fallen, always have it checked by a qualified technician before you switch the unit on again.
- Do not use chemicals to clean the unit. They damage the varnish. Only clean the unit with a dry cloth.
- Keep away from electronic equipment that may cause interference.
- Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
- Switch the unit off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the unit.
- Make sure that the mains lead cannot be damaged when people walk on it. Check the mains lead before every use for damages and faults!
- The mains voltage is 220-240VAC/50Hz. Check if power outlet match. If you travel, make sure that the mains voltage of the country is suitable for this unit.
- Keep the original packing material so that you can transport the unit in safe conditions.
This mark attracts the attention of the user to high voltages that are present
inside the housing and that are of sufficient magnitude to cause a shock
hazard.
This mark attracts the attention of the user to important instructions that
are contained in the manual and that he should read and adhere to.
The unit has been certified CE. It is prohibited to make any changes to the
unit. They would invalidate the CE certificate and their guarantee!
NOTE: To make sure that the unit will function normally, it must be used
in rooms with a temperature between 5°C/41°F and 35°C/95°F.
Electric products must not be put into household waste. Please bring them to a
recycling centre. Ask your local authorities or your dealer about the way to
proceed. The specifications are typical. The actual values can slightly change
from one unit to the other. Specifications can be changed without prior
notice.
Do not attempt to make any repairs yourself. This would invalid your warranty.
Do not make any changes to the unit. This would also invalid your warranty.
The warranty is not applicable in case of accidents or damages caused by
inappropriate use or disrespect of the warnings contained in this manual.
Power Dynamics cannot be held responsible for personal injuries caused by a
disrespect of the safety recommendations and warnings. This is also applicable
to all damages in whatever form.
OVERVIEW
- Power switch
- DC Power connector
- Speaker output connector for passive speaker
- Infrared receiver and LED indicator
CONNECTION
Connect the DC adapter to the speakers and connect to the 110V~230V AC power.
Then you can turn on power switch. The status indicator LED will be red and
fast blinks, after about 10 seconds the speaker will sound a tone, it means
the speaker is ready.
DOWNLOAD AND INSTALL LEGACY PLAYER APP
For the best user experience, please download the latest version of the LEGACY
Player app via Apple store or Google play. Here you will also find the latest
features and explanations on how to use them.
TECHNICAL SPECIFICATION
| WS40A/AB| WS50A/AB
---|---|---
Ref.nr.| 952.538/952.541| 952.539/952.542
Output power MAX| 200W| 200W
Output power: RMS| 60W| 60W
Diameter tweeter| 1/2”
Diameter woofer| 4”| 5.25”
Tweeter type| Mylar
Impedance| 8 Ohm
Frequency response| 100Hz – 20KHz| 90Hz – 20KHz
SPL @ 1W/1m| 87dB| 89dB
IP rating| IPX5
Power supply| 100-240VAC 50/60Hz
Dimensions per speaker| 155x180x235mm| 245x180x160mm
Weight| 3.60kg| 5.00kg
The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.
The products referred to in this manual conform to the European Community
Directives to which they are subject:
European Union
Tronios B.V., Bedrijvenpark Twente Noord 18, 7602KR Almelo, The Netherlands
2014/35/EU
2014/30/EU
2011/65/EC
2014/53/EU
United Kingdom
Tronios Ltd., 130 Harley Street, London W1G 7JU, United Kingdom
S.I. 2016:1101
S.I. 2016:1091
S.I. 2012:3032
S.I. 2017:1206
Specifications and design are subject to change without prior notice.
www.tronios.com
Copyright © 2023 by TRONIOS the Netherlands
References
- Samen zijn we open. Samen staan we sterk. - Stichting Open
- Samen zijn we open. Samen staan we sterk. - Stichting Open
- Sound & Light distributor - Tronios.com
- Homepage - Wecycle
- Homepage - Wecycle