JONATHAN Y JYL1126B-SET2 Sabrina 28.5 Inch Vintage Industrial Iron LED Table Lamp Instructions
- October 30, 2023
- JONATHAN Y
Table of Contents
JONATHAN Y JYL1126B-SET2 Sabrina 28.5 Inch Vintage Industrial Iron LED
Table Lamp
Product Information
The product is a lamp with model number of JYL1126-SET2. The lamp consists of several parts, including a lamp base, saddle, socket, harp, shade, finial, and bulb. The lamp’s dimensions are 14L x 7W x 28.5H. The lamp has a polarized plug for safety and requires an on/off type A bulb with a maximum of 60 watts or an LED bulb with a maximum of 9 watts.
Product Usage Instructions
- Inspect the item carefully before attempting to install it. Do not install if there is any damage or obvious defect as the item may not be returned once installed.
- Unplug the lamp before using any cleaning solutions. Dust the shades with a feather duster or an appropriate vacuum brush attachment. Wipe with a soft, dry cloth, and clean the lamp bases with methods appropriate to the material. Avoid using chemicals and household cleaners as they may damage the finish.
- Make sure you have all parts indicated before beginning assembly of the item. Assemble the item on a soft surface to prevent scratching the finish during assembly.
- To reduce the risk of fire, electrical shock, or injury to persons or property, follow the guidelines below for safe use and installation:
- The external flexible cable or cord of this lamp cannot be replaced. If the cord is damaged, the lamp shall be destroyed.
- This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. Do not attempt to disregard this safety feature.
- Insert the harp (D) into the saddle (B). Put the shade (E) on the harp (D), then tighten the finial (F) into the harp (D). Insert the bulb (G) into the socket (C).
- Put the light on a level surface to check if everything is stable.
- Enjoy your lamp!
WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN
INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE & IMPORTANT SAFETY INSTRUCTIONS
- Please make sure that you have all parts indicated before you begin assembly of this item
- This item should be assembled on a soft surface to prevent scratching the finish during assembly
- To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation
- The external flexible cable or cord of this lamp cannot be replaced; If the cord is damaged, the lamp shall be destroyed.
- This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
Assembly
PREPARATION
Before beginning assembly of the product, make sure all parts are present.
Compare parts with the package contents list and hardware contents list. If
any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE”A” BULB MAX 60-WATT OR LED BULB MAX 9-WATT, THERE IS LEAD 9-WATT BULB IN THE BOX.
Step 1
Insert the Harp (D) into the Saddle (B). Put the shade(E) on the Harp(D), then
tighten the Finial (F)into the Harp (D) Insert the bulb(G) into the socket(C).
Step 2
Put the light on a level surface to check if everything is stable.