nexvoo Breeze Mask Lite User Manual

: June 5, 2024
: nexvoo

Table of Contents

nexvoo Breeze Mask Lite
Important Notice
Intended use
Product Overview
Before Use
How to Use
Technical Specifications
Maintenance and Inspection
Storage
Troubleshooting tips
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

nexvoo Breeze Mask Lite

Important Notice

This manual and the information contained herein are provided for use as a maintenance and operation guide. No license or rights to manufacture, produce, and/or sell either the manual or articles described herein are given. Nexvoo Inc reserves the right to change the design and specifications for improvement purposes without any notice. We recommend that all users read and fully understand this manual before using the Breeze Mask Lite. All statements, technical information, and recommendations herein are based on tests we believe to be reliable, but the accuracy or completeness thereof is not guaranteed; and the following is made in lieu of all warranties, expressed or implied, including the implied warranties of merchantability and fitness for purpose: Seller’s and Manufacturer’s only obligation shall be to replace such quantityof the product proved to be defective. Before using, the user shall determine the suitability of the product for intended use, and the user assumes all risk and liability whatsoever in connection therewith. Neither Seller nor Manufacturer shall be liable either in tort or in contract for any loss or damage — direct, incidental, or consequential — arising from the use of or the inability to use the product. No statement or recommendation not contained herein shall have any force or effect unless it is in an agreement signed by officers of the Seller and Manufacturer.

Intended use

Breeze Mask Lite has one brush-less ultra-silent micro fans on right side which will create an active fresh air system, making it easier for you to breath normally during the study, work, exercise, or any other activity. Comprehensive solution for difficult breathing, shortness of breath, etc. Breeze Mask Lite has excellent deep cleaning effect with extra 5-layer filters which can improve filtration efficiency.

Product Overview

Components

Strap adjustment buckle
Silicone band
Input air
Outer cover of the filter
Filter
External clamp
USB port
Switch button
UV-C LED light
Power indicator
Air module
Internal clamp
Silicone seal ring
Output air

Dimension

Before Use

Charge the battery
Charging will begin once you connect the device to an electronic power supply. When charging is complete, please unplug the charging cable.

Caution

When charging the battery for the first time after purchasing the product, use the device only after the battery is fully charged.
When using the product for the first time or when the product has not been used for an extended period of time, the device may only operate for a short period of time even after the power indicator stopped flashing. In such a case, charge the device again before using it.
Use only the enclosed charging cable.

Note
The color of the power indicator means battery level status.

Color	Status	Function

Green

| Blinks every 2 seconds| In charging.
On| Full charge.

Off

| Electric quantity is more than 10%, and the

device is unconnected to the charger.

Red| Blinks every 2 seconds| Electric quantity is less than 10%.

The buzzer sounds to indicate the change of the device status.

Sound| Function

. Turn on successfully.

---|---

1 beep

| . urn off successfully.

. he fan enters the low speed mode.

. Enter charging mode.

2 beeps

| . The fan enters the medium speed mode.

. The remaining electric quantity is 10%.

3 beeps| The fan enters the high speed mode.

Clean the mask
Clean the mask before use. The cleaning should be done using 70% isopropyl alcohol wipes or cloth dipped in 70% alcohol. Clean the outer surface by swabbing or wiping the surface with the alcohol wipes.

Caution

Do not use any other cleaning materials or chemicals.
Do not use a brush to clean, as it might scratch it.

UV Disinfection
This mask has the UV-C LED lights on both modules. When you use the USB cable to connect the device to an electric power supply, the UV-C LED will automatically turn on for a period of time to disinfect the filter.

Pre-test on skin
When using the product for the first time, always test first for compatibility with your skin.

How to Use

Wear the mask

Hold the mask in hand, place it upwards, and let the silicone bands hang downwards below hand.
Adjust the mask to positions of your nose, cheeks and chin. Pull the lower silicone band to the back of neck, below the ears and then pull the upper silicone band to the top back of your head . You can use the strap adjustment buckles to adhere the mask to the face.
Face fit check should be done. When wearing, the fan on the right side of the mask will turn on automatically, which can take in the air. If leakage is detected in the rest of mask edge, adjust the silicone bands again.

Note
The device has a distance sensing function. If the device is far away from your face when wearing, the fan may not turn on automatically, you can also short press the swhich button to turn it on.

Adjust the fan speed
The mask features one brush-less ultra- silent micro fans with 3 levels of speeds to fit your natural breathing, walking, and activity needs. You can adjust by pressing the swhich button. To turn off, continuously press the swhich button for more than 1 second. You can also remove the mask directly; the device will automatically turn off.

Note

When used for the first time, the wind speed of the fan is in the low speed mode by default.
If the device is turned on again after it was automatically turned off, the speed mode will remain the way it was prior to turning off, otherwise it will be in low speed mode.

Replace the filter

Find the buckle of the filter cover which is near the USB charging port. Pull out the filter cover by hand, and then the filter cover will automatically pop.
Remove the old filter, and take the new filter and insert it properly.
Put the filter cover until it clicks.

Technical Specifications

Product Name	Breeze Mask Lite
Product Type	NM203
Suitable for	Adults

Product Size

| 7.28’’L x 4.13’’W x 4.21’’ H

185L x 105W x 107H mm

Application

| Non-medical Personal protection

Accessories

|

Charging USB cable (Micro-USB)1 Filter Package1

User manual*1

Maintenance and Inspection

If you have not used the device for an extended period, inspect it carefully and check that the device works properly and safely before use.
If the device malfunctions or appears damaged, please contact your local distributor.

Caution
In the following cases, the guarantee is not provided:

Unauthorized repair, misuse: strikes, negligence, wrong use, damage, alteration, misuse parts.
Excess warranty.
Force majeure, which resulted in damage to the product.
Damage, which is not included in the following list of faults:
The lack of production.
Cannot turn on the device.
The power indicators do not work.
The switch buttons do not work.
Other manufacturing errors.

Storage

Store in a clean and dry, well-ventilated place out of the reach of children.
Remove the charging USB cable from the USB port when not in use for a long time and store them safely.
Do not leave in hot or humid places, such as near flame, in bright sunlight, or in a bathroom.

Troubleshooting tips

Please visit www.nexvoo.com for troubleshooting tips and access the diagnostic tool to help troubleshoot any issues you may have with your Breeze Mask Lite.

Disposal