VIVIBright F20 PRO series LED Video Projector Owner’s Manual

F20 PRO series LED Video Projector
Owner’s Manual

The manual is subject to change without any prior notice.
OSD options and pictures shown in this document may differ slightly from your product.
Please read the instructions carefully before using the product and keep safely for future reference.

For FAQs and more information, please visit the manufacturer or vendor website.
Model: f20/f20Pro/f30/f40 Series

Important Safety Instructions

Read and understand all instructions before you use this device.
Do not change any settings that are not described in this manual.
If physical injury, loss of data, or damage is caused by failure to follow instructions, the warranty does not apply.

Setup

• To reduce the risk of fire and/or electric shock, do not expose the device to rain or moisture, or objects filled with liquids, such as vases. should not be placed on the device.
• Do not place the device in areas susceptible to excessive dust and dirt or near any appliance generating a strong magnetic field.
• To prevent overheating, do not block or clog the ventilation openings.
• Never place the device in a confined space. Always leave enough space around the device for ventilation.
• Protect the device against direct sunlight heat, large temperature fluctuations, and moisture.
• When the device runs for a long period of time and the surface becomes hot. shut it down and unplug the power cord. Resume operation only after the device has cooled.
• Always handle the device with care. Avoid touching the lens.
• Never place heavy or sharp objects on the device or the power cord.
• To avoid electric shock. do not disassemble.
• Only use attachments or accessories specified by the manufacturer.
• Avoid extreme vibration. It may damage the internal components.
• Do not allow children to handle the device without supervision.
• Under the following conditions, a layer of moisture can appear inside the device which can lead to malfunctions;
  a). if the device is moved from a cold to a warm area;
  b). after a cold room is heated;
  c). when the device is placed in a damp room. To avoid any moisture, seal the device in a plastic bag before moving it to another room, and wait for one to two hours before you take it out of the bag.

Power Supply

• Power off the device before removing the power supply from the socket.
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from this device.
• Unplug this device if there are lightning storms or when unused for a long period of time.
• Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Before you make or change any connections, ensure that all devices are disconnected from the power outlet.
• Never touch the power cable or the power connection with wet hands.

Hearing Safety

• To avoid hearing damage, do not listen for extended periods at high volume. Set the volume at a safe level.

Cleaning

• Power off the device and remove it from the power supply before cleaning the surface.
  Use a soft, lint-free cloth. Never use liquid, gaseous, or easily flammable cleansers (like sprays, abrasives, polishes, and alcohol).

• Do not use any liquid cleaning agents to clean the lens as they may damage the protective coating on the lens.

• Wipe the surfaces gently. Be careful that you do not scratch the surfaces.

• Use lens cleaning paper to clean the lens of this projector.

Repairs

• Do not make any repairs to the device yourself. Only have your device repaired by an authorized service center.
• Improper maintenance can result in injuries or damage to the device.
• Refer all servicing to qualified service personnel.

Class ll equipment symbol
This symbol indicates that the unit has a double insulation system.

Risk Group 2
CAUTION Possibly hazardous optical radiation emitted from this product. Do not stare at the operating lamp. May be harmful to the eye.

IEC 60825-1:2014. Complies with IEC 62471:2006 Risk Group 2.
Caution

• Possibly hazardous optical radiation emitted from this device.
• Do not stare at the operating beam. The bright light may hurt your eyes.

What’s Included

Overview

Front View

RearView

Bottom View

Remote Control

Prepare the Remote Control
Please install two AAA batteries(not included) in the remote control before use.
a). For first-time use. remove the battery insulation tab to activate the remote control batteries.
b). To replace the batteries. slide to open the battery compartment. insert new batteries (matching the polarity (+/-) indicated), and close the battery compartment.

Getting Started

placement
Place the projector on a flat, stable foundation squarely in front of the projection surface. For best results. the projection surface shall be white and flat. The distance between this projector and the projection surface must be a minimum of 1 meter (39.4 inches) and a maximum of 3 meters (118 inches).

NOTE
You can also install your projector in the following ways: from the rear. front ceiling and rear ceiling. Make sure you select the correct Projection Mode option in this projector’s menu settings.

Select Projection Distance
The distance between this projector and the projection surface determines the approximate size of the image. Use the table below to determine approximately how far to place this projector from the screen based on the size of the projected image.

power On
a). Connect this projector to the outlet by using the provided power cord and adapter.

b). Remove the lens cover.
c). Press the power button on the projector or on the remote control once.
d). Turn this projector towards a flat, white projection surface.
e). To focus the image, rotate the lens.

settings
Go through the setup process when you turn on this projector for the first time.
Press “Menu” on the remote control to access the home menu, select

OSD Language| 01.Czech/02.Danish/03.German/04.English/ 05.Spanish/06.Greek/07.French/08.Croatian/ 09.1talian/10.Hungarian/11.Dutch / 12.Norwegian/13.Polish/14.Portuguese
/15. Russian/16. Romanian/17.Slovene/ 18.Serbian/19.Finnish/20.Japanese/21.Korean /21.Chinese_Traditional/23.Chinese_Sim
---|---
Picture Mode| Standard / Soft / User / Vivid
Color Temperature| Medium/Warm/User/Cold
Aspect Ratio| Auto/4:3/16:9
Reduce Display| Zoom screen size from 75%-100%
Sound Mode| Standard/Music/Movie/Sports/User
Surround Sound| Off/SRS TruSurround XT/Surround
Rotate| Front/Rear/Front Ceiling/Rear Ceiling
Restore Factory Default| Reset all settings
`Software Update (USB)| Upgrade firmware

Using the Projector
play from HDMI Playback Devices
This projector can be connected to various HDMI playback devices such as a TV box. TV stick. DVD player. a set-top box (STB), gaming console, or other devices.
To play from HDMI playback devices:
a). Connect this projector to an HDMI playback device with an HDMI cable (not included).
b). It will automatically start the HDMI playback when connected to an HDMI playback device for the first time.

play from a USB Drive
With this projector. you can enjoy music and videos. and pictures that are stored on a USB drive.
To play from a USB drive:
Insert a USB drive into the USB socket
a). Press “input” to access the USB source
b). Select a file, then press “Enter” This projector will play the video or music. or display the photo you selected.
c). To stop playing, press the “Back” button.

play from External Devices
This projector can also be connected to external devices.
including headphones and speakers.
When connected to external speakers. the built-in speaker system is disabled.
To play from external devices:
a). Use a 3.5mm audio cable or an adapter (not provided) to connect your headphones or external speakers.
b). Connect the other end of the cable to the AUDIO OUT port on this projector. You will hear audio from external devices

NOTE

Before connecting headphones. turn down the volume to avoid straining your ears.

NOTE

Use Screen Mirroring
For the Mirroring version only (Phone to projector)
Dear customer:
The configuration of this version is optional, please confirm that the version you purchased has this feature,
These descriptions or specifications depend on your vendor.
You can mirror the screen of your smartphone or tablet onto the projection surface.

Wired Mirroring
For i0S Devices:
a). Connect your smartphone or tablet to this projector using a USB cable (not included) to ensure that the connection with USB2 Multimedia Interface.
b). Press input to access the input source, select [Mirroring Cast) and press “Enter”

c). Click “Trust this computer· on your device.
This projector will mirror the screen of the connected mobile phone or tablet.

For Android devices
a). Press[OK) to switch to the Android mirroring screen interface, connect your Android device to the projector’s USB? 2 port via USB cable
b). Select [Settings] c). Select[System] d). Select[About phoneJ,press[Build number)5~7 times to turn on [Developer options)mode
e). Back to [System), select[Developer options)
f). Select [USB configuration]>select[MIDI] g). Turn on [USB debugging)
h). Start mirroring

Wireless Mirroring
How to set wireless projection based on 4G signal in the iOS system
a). Select the signal menu to enter the same screen interface, the device defaults to match the iOS system, and the specific point can refer to the corresponding interface text  description (as shown below);

b). In the interface you can see the corresponding text describing how to connect the corresponding SSID and matching password, then enter your Apple 10S device (iPhone  & iPad) to select the corresponding WIFI, search and product (device name is random, each device The name is different; the default password: (12345678) is connected (as shown below).

c). Return the Apple iOS device (iPhone&iPad) to the desktop interface drop down the screen, and select and use the Airplay (Screen Mirroring) function. and open the image (as shown below). When the mirror function shows that the connection is successful. the content corresponding to the IOS device will be displayed on the projection screen.
Because your smart device has 4G capabilities. you can travel the network through your own network signals.

For Android devices(NOTE: Android devices must have built-in Wireless Projection/Multi-Screen function):
a). Press[OK) to switch to the Android mirroring screen interface
b). Dropdown Menu>[ Wireless Projection)(Some devices named [Multi-Screen])
c). Search the projector’s name and connect it
d). Start Mirroring

NOTE

How to set up an external hotspot signal
If you need to connect an external hotspot signal, please open 192.168.49.1 in the address bar of the mobile browser, or scan the QR code on the HDTV screen to enter the product background. Select the first WIFI setting, find the WIFI network you need to connect to, enter the WIFI password, and connect.
Upgrading the Firmware
a). Download the firmware upgrade software with a USB drive from the seller
bl. Insert the USB drive into this projector’s USB port.
c). Press [Menu) to access the home menu, select [Settings)> [Software Update)
d). Press [Enter) The firmware upgrade will automatically begin. Follow the on-screen instructions to complete the process.

Specifications

NOTE
Specifications and design are subject to change without notice.

Power supply: AC 90-240V
Power consumption: < 150 W
Display technology: 5.8 inch LCD 1920 x 1080P
Light source: RGB LED
Projection image size: 40-120 inch
Resolution: 1920 x 1080P
Contrast ratio: 15000:1 dynamic
Throw ratio: 1.38
Throw distance: 1 m to 4 m
Speaker drivers: 10W x2
Remote control batteries: 2 AAA batteries(Not included)
Dimensions (W x H x DJ: 290 x 240 x 100 mm
Weight: 2760 g

Troubleshooting

a). Cannot turn on the projector with the remote control?
Make sure that this projector is connected to the power supply.
b). The remote control doesn’t work?
Make sure the battery is already installed in the remote control.
Replace the batteries.
c). Blurred image?
Please adjust the keystone correction ring.
d). Rotate projection image?
Press [Menu) to access the [Settings) > [Rotate/Flip) and switch to a correct state.
e). Repeatedly reboot?
Go to [Settings) > [Software Update) to upgrade the firmware and reboot your projector again.

NOTE

This product complies with the requirements of the European Community.
This product can be used across EU member states. The following importer is the responsible party (contact for EU matters only).
This product is designed and manufactured with high-quality materials and components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste and should be delivered to an appropriate collection facility for recycling.
Proper disposal and recycling help protect natural resources, human health, and the environment. For more information on the disposal and recycling of this product, contact your  the local municipality, disposal service, or the shop where you bought this product

FCC Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.
• Increase the separation between equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

please Note:
Any provided shipping labels must be used within 20 days from the date they’re issued by Support.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.

Trademarks

HDMI, and HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Warranty

a). 30-Day Money-Back Guarantee for Any Reason.
You may return your undamaged product and packaging within 30 days of purchase to receive a FULL REFUND for any reason. If the reason for return isn’t quality-related,  the customer must pay for the return shipping.
b). 12-Month Warranty for Quality-Related Issues.
the products are warrantied to be free from material and workmanship defects for 12 months from the date of purchase. Within this period, Your seller will provide a  replacement and cover any return shipping costs for products that fail in normal use.

© Vivibright Co., Limited. All rights reserved.
Vivibright logo is the trademark of Vivibright Co., Limited, registered in the United States and other countries.
Model: f20/f20Pro/f30/f40 Series
For FAQs and more information.
please visit: www.vivibright.com
[email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>