KUZCO EC34111 LED Exterior Ceiling Installation Guide
- June 4, 2024
- KUZCO
Table of Contents
KUZCO EC34111 LED Exterior Ceiling Installation Guide
START FROM HERE
19054 28th Avenue Surrey, BC Canada V3Z 6M3
T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196
W: kuzcolighting.com
- Make sure POWER is COMPLETELY OFF at the fuse box
- Have your fixture installed by a qualified licensed electrician
- Prepare everything in a clear area
- Wear gloves at all times during this installation
- Read instructions carefully before you start assembly
- Keep this installation sheet for future reference
Technical Support: 1-855-855-8926
Please Note:
-
This Kuzco LED fixture comes with pre-wired LED module(s)
-
Unless instructed, Do Not touch any part of the LED module(s) as any unnecessary
contact with the module could cause permanent damage -
Use 0-10V type of dimmer for dimming application
-
Must be installed on a covered ceiling
-
120-277V input
- Remove fixture from its original package.
- Separate fixture body (2a) from mounting plate (1c) by removing set screws (2f) with allen key.
- Attach mounting plate (1c) to electrical junction box (1a) using junction box screws provided (1e) in hardware package.
- Make proper electrical connections (black to hot “L”, white to neutral “N”, ground to “GND”) with wire nuts (1b) provided in hardware package.
- Attach fixture body (2a) to mounting plate (1c) with set screws (2f) and allen key.
- For Wall Mount Only: To prevent moisture from entering the electrical junction box (1a) and causing a short, seal around the top perimeter between the fixture and the wall with weather resistant caulking (Illustration 1).
19054 28th Avenue Surrey, BC Canada V3Z 6M3
T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196
W: kuzcolighting.com
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>