KIWI design QB01 10000mAh Add on Battery Pack User Manual
- June 15, 2024
- KIWI design
Table of Contents
KIWI design QB01 10000mAh Add on Battery Pack
Product Introduction
- Charge Cable
- Cable Clip
- Power Bank
- Fastener Strap
- Battery Indicator
- Battery Indicator Switch
- Type-C Input/Output
- USB A Output
How to use
-
Perfectly compatible with KIWI design head strap: you can choose to Install it on the top strap or under the back pad of the KIWI design head strap.
-
Install the cable clip on the left side of the strap, then fix the cable with the cable clip. Finally connect the cable to the headset.
-
The power bank will charge the headset immediately once the cable is connected. During this period, the battery indicators will stay on and go off as the battery level decreases. (Please note that the switch only activates the battery indicator light and does not turn the battery on or off.)
-
We recommend using the VR original adapter and cable to charge this power bank, or other qualified power adapters and cables certified with the fast charging protocol. The battery indicator flashes for the current battery level when charging the power bank.
Tips: When not using your VR headset for a long period of time it is
recommended powering off the VR headset. This will help to maintain the
battery packs power level.
|
|
---|---|---
30-day money-back guarantee| 18-month warranty| Lifetime user support
Customer Support
: customerservice@kiwidesign.com
: @KIWIdesign_shop
: @AlexbyKiwidesign
: www.kiwidesign.com