BOSS AUDIO SYSTEM 616UAB 200 Watts MP3-Compatible Digital Media AM-FM Receiver User Manual
- June 4, 2024
- Boss Audio System
Table of Contents
BOSS AUDIO SYSTEM 616UAB 200 Watts MP3-Compatible Digital Media AM-FM
Receiver
Installation
Installation Procedures
First complete the electrical connections and then check for correctness of
connection.
Installation Opening
This unit can be installed in any dashboard which has an opening as shown
below.
Insert the mounting sleeve into the dashboard. Then bend the tabs on the
mounting sleeve with a screwdriver to achieve fastening of the mounting
sleeve.
Make sure that lock lever is flush with the mounting sleeve( not projecting
outward).
Connect all wiring harness and slide the head unit into the mounting sleeve until it clicks into place.
Wiring Connections
- +12V DC Negative Ground.
- Only support speakers of 4 ohms or above.
- The maximum current of the Amp remote trigger is 200mA.
Overview of the Components
- PWR(power On/Off), SRC (source) button, (end call) button
- VOL (volume) knob, (Push-To-Talk) button, SEL (select/menu) button
- (tune/seek down, previous track, fast reverse) button
- (tune/ seek up, next track, fast forward) button
- BAND button, AMS(automatic store / preset station scan, automatic music search) button, (answer call)
- LCD Display
- (pause/play), (MUTE) button, Preset station 1 button
- INT (intro), Preset station 2 button
- RPT (repeat), Preset station 3 button
- RDM (random), Preset station 4 button
- -10(previous 10 tracks), F-(previous folder), Preset station 5 button
- +10(next 10 tracks), F+(next folder), Preset station 6 button
- IR remote sensor
- USB Port
- Hands-free Microphone
- AUX IN (aux audio input) jack
- Reset button
General Operation
Turn Unit on/off, Change the Source
- Press any button to turn on the unit. Press and hold the SRC/PWR button to turn off the
- Press the SRC/PWR button to select the different modes: Radio, USB(with USB device inserted), AUX-IN(aux audio input) and BT(Bluetooth)
Adjust the volume (VOL) Rotate the VOL knob to increase or decrease the volume level.
Push-To-Talk
Press the icon button (VOL knob) to access to smartphone voice assistant
capability via Bluetooth.]
Adjust Menu Options (SEL)
-
Press and hold the SEL button (volume knob) to enter into setting menu, then press the SEL button (volume knob) repeatedly to select setting items:
-
Clock Display/Settings: Press and hold the SEL button (volume knob) to display clock time.
Press and hold the SEL button (volume knob) again, the hours digits start flashing on the display, Set hours by rotating the VOL knob.
Short press the SEL button (volume knob), the minute digits start flashing. Set minutes by rotating the VOL knob. -
ILL MID/HI/LOW: This receiver is equipped with 3 brightness settings. Rotate the volume knob to preset the illumination to middle, high or low.
-
BASS/TREBLE:-7, -6, ~, -1, 0, +1,~, +6, +7
Note: BASS and TREBLE settings are only enabled when EQ setting is turned OFF. -
BALANCE:L7, L6,~, L1, 0, R1,~,R6, R7
-
FADER:R7, R6, ~, R1, 0, F1, ~ ,F6, F7
-
EQ(Equalizer) Setting: OFF, FLAT, CLASS, POP, ROCK, JAZZ
-
Loudness: LOUD ON/OFF
-
DX/LOCAL: Enables or disables the local broadcast mode (LOCAL).
-
Stereo/Mono: Switches between MONO and STEREO reception mode for radio frequencies.
-
CLOCK 12/24: Select between 12 hours and 24 hours display.
-
AREA US/EU: This car radio is equipped the USA / Europe frequency. Rotate the volume knob to switch between USA and Europe frequency. The system will change the frequency setting in about 3 seconds.
-
-
Rotate the VOL knob to change values.
Mute On/Off
During AUX mode, briefly press the button to toggle mute on or off.
USB Port
Connect to a USB storage device for audio play, or charging of a mobile phone.
Hands-free Microphone
To receive your voice when you calling by using this Bluetooth handsfree
system.
Aux Audio Input Jack
Connect to the headphone jack on an external device (e.g. a mobile phone or
MP3 player) for audio play.
Reset
Push the RESET button with a thin object with a pointed end to reset the unit.
This function may be used when the LCD does not display normally or sound is
distorted, or when any of controls are disabled.
Radio Operation
Switch Between USA area and Europe area Frequency In radio mode, press and
hold the SEL button (volume knob) to enter into setting menu, then press the
SEL button (volume knob) repeatedly to access the state of the USA and Europe
frequency, then rotate the volume knob to switch between USA and Europe
frequency. The system will change the frequency setting in about 3 seconds.
Change Bands
In radio mode, shortly press the BAND button to switch between the FM1 (F1),
FM2(F2), FM3(F3) and AM1(A1), AM2(A2) bands.
To Store / Recall Preset Station s
he radio can be stored 6 preset stations for each band (FM1, FM2, FM3, AM1 and
AM2) for a total of 30 preset stations.
-
To memorize a station:
Press and hold the desired preset buttons (1-6) to save a radio station. -
To recall a preset station:
Briefly press the respective station button (1-6) to recall the corresponding preset station
Manual Tuning
In the radio mode:
Press and hold the or button to enter the manual tuning mode.
In manual tuning mode, briefly press the or button to search the next or
previous frequency step by step.
Seek Tuning
In radio mode, press the or button, the automatic search will start, it
will search upward or downward for the strong signal radio station within the
current band. The auto searching will stop until find a station.
Automatic Store Station / preset station scan
Press and hold the AMS button to store 18 FM stations and 12 AM
stations automatically.
Briefly press the AMS button on remote control to recall each preset
station that stored in the memories in each band.
USB Operation
Play MP3/WMA music inside a USB stick. Insert the USB stick with MP3 /WMA music’s into the USB port, it will play automatically.
Note: the USB port also supports charging mobile phone, the maximum charging ability is 5V/1A.
Select Next Track or Previous Track
In the USB mode, briefly press the or button to play the the next or
previou track.
Fast Forward/Reverse
Press and hold the or button to fast forward or reverse a track.
Play / Pause
Press the button to interrupt the playback of a music (pause
function). Press this button again to continue the playback.
Introduction Scan
Press the INT button to play the first 10 seconds of each track. Press
again to stop the introduction scan, and play the current track.
Repeating the track
Press the RPT button to toggle between RPT ONE (Continuously repeat
current track) and RPT FLR (Continuously repeat all tracks in current folder),
RPT ALL (Play all track).
Playing all tracks in random
Press RDM once, play all tracks randomly. Press RDM once again,
exit from random playback.
Track/Folder Navigation
-
Press the -10/+10 buttons to jump 10 tracks backward or It is required that over 10 tracks be available on the storage medium.
-
Press and hold the -10 / +10 button to select the previous or the next (If there are folders on the storage medium.)
Select the track or file for playback in MP3 format
- Press and hold the AMS button to enter track search
- Rotate the volume knob to select the number of your favorite track with high
- When the desired track number appears, confirm your selection by pressing the volume
Aux Audio Operation
Using this socket, it is possible to hear the sound of other playback devices such as MP3 players, CD players etc. through the car loudspeaker.
- Please connect the external device with a 3.5 mm stereo jack plug to the AUX socket.
- Press the SRC button repeatedly until “AUX IN” appears in the display.
- You hear the playback from the external device via the loudspeakers. You can adjust the volume of the external device to a comfortable level with the volume control of this device.
Bluetooth Operation
Pair and Connect
Pair the mobile phone with the device before using it.
- In any mode, prior to pairing and connecting, the BT logo is flashing in the LCD indicating that no device is connected. To begin pairing, enable BT mode on your mobile
- When the phone finds the car audio system, the “BOSS AUDIO 616UAB” name will be
- Choose the “BOSS AUDIO 616UAB” from the device list to pair and connect with the car audio system. Upon confirming, the BT logo will stop flashing.
- When pairing is complete, the mobile phone audio will automatically transfer to the car audio system whenever a call is made or received, or when the mobile phone plays
Make a Call
- To make a call, dial the call directly from the paired mobile
- To make a call with this Bluetooth handsfree system:
- When linking up the Bluetooth-enabled mobile phone to this Bluetooth handsfree system, press the button to access the dial telephone number mode, then press the “0~9”, * and # button on remote control to input the telephone number, and the entered number will be shown on the LCD
- If a number has been incorrectly inputted, press the DEL button or button to delete
- Press the button to make outgoing
Answer a Call
When the mobile phone is called, the incoming telephone number displays on the LCD display. Press the button to receive the incoming call.
Reject or End a Call
To reject or end the call, press the button.
Redial Last Dialed Number
Press and hold the button to redial the last dialed phone number
Switch Audio Between Car Audio and mobile Phone
During a call, press the VOL knob/button to switch the audio source
from the car audio system back to your mobile phone.
Audio Streaming (A2DP)
The unit supports A2DP (advanced audio distribution profile) wireless
streaming audio from your Bluetooth mobile device directly to your head unit.
You can also control your music from the front panel of the head unit using
AVRCP (audio video remote control profile).
- After pairing, connecting and enabling streaming audio from a compatible mobile device, press the SRC button to enter BT mode and the “BT AUDIO” will be shown on the LCD display.
- When a mobile device is paired, music played through that device will automatically be heard through the car audio
- Press the or button to play the next or previous on the mobile phone.
- Press the button to pause or resume music
Push-To-Talk
This Push-To-Talk feature allows direct access to Android and IOS smart-
phones voice assistant capability when user establish the Bluetooth connection
between user’s smartphone and this receiver. Simply connect directly from this
receiver via Bluetooth with button ( VOL knob).
Note: Before using the Push-To-Talk, user must enable the mobile data on user’s smartphone. To use the navigation feature, switch to the BT Audio source to hear voice commands over your vehicles speakers
Remote Control
- (Power on/off) button
- VOL+/VOL-(volume increase/decrease) button
- Band button, (answer call) button
- PREV: tune down, seek down; Track down, fast reverse
- SEL(selection) button
- NEXT: tune up, seek up; Track up, fast forward
- Mute button, DEL(Delete) button
- CLK(clock setting) button, (end call) button
- button, preset station 1 button, keypad 1
- INT(intro) button, preset station 2 button, keypad 2
- RPT(repeat) button, preset station 3 button, keypad 3
- RDM(random), preset station 4 button, keypad 4
- -10(previous 10 tracks), preset station 5 button, keypad 5
- +10(next 10 tracks), preset station 6 button, keypad 6
- ST(stereo) button, keypad 7
- LOUD(loudness) button, keypad 8
- AMS(automatic music search) button, keypad 9
- SRC(Source) button, keypad *
- EQ(Equalizer) button, keypad 0
- LOC(local)/DX button, keypad #
Note: When using the remote control for the first time, you must pull out the protective plastic tab from the battery compartment found on the back of the remote control
Specifications
General
- Power supply Requirement : DC 12V
- Maximum power output : 50W X 4CH
- Speaker impedance : 4 – 8 Ohm
- Unit Dimensions(WxHxD) : 7.0 X 2.0 X 2.76 inches
- Weight : 0.84 lbs
- Fuse : 10 A
FM
- Frequency Range: 87.5 MHz – 107.9 MHz (USA)
- 87.5 MHz – 108.0 MHz (EUROPE)
- Channel step: 200 KHz (USA)
- 50 KHz (EUROPE)
AM
- Frequency Range: 530 KHz – 1710 KHz (USA)
- 522-1620 KHz (EUROPE)
- Channel step: 10 KHz (USA)
- 9 KHz (EUROPE)
USB
- RADIO
- Usable Audio Formats: MP3/WMA
- Pre-amp Output: Front and Rear
- Frequency Response: 20 Hz – 20KHz
- S/N Ratio: 60dB
- USB Port Type: 2.0
- USB Charging: 5V/1A
BT
- BT Profile supports: Headset, Handsfree and A2DP & AVRCP
- Range of frequency: 2.4GHz
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>