renkforce SB-62 Wall Mount Outlet Hanger Instruction Manual
- October 30, 2023
- renkforce
Table of Contents
renkforce SB-62 Wall Mount Outlet Hanger
Product Information
Outlet Hanger Wall Mount SB-62
The Outlet Hanger Wall Mount SB-62 is a device that allows for easy and convenient storage of electrical cords. It is designed to be mounted on a wall and has a cord groove that allows for the cord to be wound around it. The mount also has a plug holder where the plug can be securely attached.
Product Usage Instructions
- Choose a suitable location for mounting the Outlet Hanger Wall Mount SB-62 on a wall near the electrical outlet.
- Ensure that the wall surface is clean and dry before mounting.
- Using screws, mount the Outlet Hanger Wall Mount SB-62 onto the wall.
- Wind the electrical cord around the cord groove, starting from the inside of the circle and winding it outwards.
- Insert the plug into the plug holder on the mount, ensuring that it is securely attached.
- Your electrical cord is now safely stored and ready for use.
- Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.
- CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
- Please closely follow the assembly instructions. Improper installation may result in damage or serious personal injury.
- Safety gear and proper tools must be used. This product should only be installed by professionals.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
- IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, contact your place of purchase for a replacement.
- MAINTENANCE: Check that the product is secure and safe to use at regular intervals (at least every three months).
INSTALLATION INSTRUCTION
- For Google® Home Mini (with adapter ring)
- For Google® Nest Mini (without adapter ring)
- Push the plug into the mount as shown.
- Wind the cord around the cord groove.
- (Note: Start winding the cord from the inside of the circle out.)
- Snap in the Google® Home Mini / Google® Nest Mini and installation is finished.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>